Tanabe® T70113A - Medalion Touring™ Stainless Steel Axle-Back Exhaust System with Split Rear Exit

1 review|Item # mpn458196767|Similar Products
$655.50
OUT OF STOCK - Unavailable until further notice
Authorized Dealer

Product Details

Medalion Touring™ Stainless Steel Axle-Back Exhaust System with Split Rear Exit by Tanabe®. Exhaust System Type: Axle-Back. Exhaust Tubing Material: Stainless Steel. Main Tubing Diameter: 2.36" to 2". Exhaust System Sound: Moderate. The elegant, well defined appearance of Medalion Touring is mature, and matches the artistry of a tastefully built, highly tuned machine. Using the all new "continous stand" ADVANTEX packing matrerial technology, Medalion Touring achieves extremely high levels of exhaust system effciency, while maintaining a street driveable, extremely low frenquency and deep tone that is well under 93db for discreet sports.

Specifications

Exhaust System Type: Axle-Back
Exhaust Tubing Material: Stainless Steel
Main Tubing Diameter: 2.36" to 2"
Exhaust System Sound: Moderate
Muffler Quantity: 2
Tip Outlet Diameter: 4"

Features

  • Designed to boost your vehicle’s performance
  • Engineered to excel in quality and durability
  • Produced from the highest-grade materials
  • Race tested and designed to perfection

Advantex Performance Exhaust Technology

Advantex is a highly advanced muffler packing material that greatly excels over other packing material types such as a loose packed fiberglass mats and composite cube types. Advantex internal packing material allows the muffler to reduce sound more, with lestaining extremely high flow characteristics.

Straightest Form, Mandrel Bent

Minimizing bends is a goal of each custom-built Tanabe exhaust system. The truest form is realized to minimize restrictions and maximize useable power gains. Where necessary, the piping is mandrel bent for improved exhaust flow characteristics.

Weight Reduction - 1.2mm Thinwall Piping

Specially engineered for use on out exhaust systems, a piping wall diameter of 1.2mm was developed, which allows weight to be significantly reduces, while remaining durable for extended. The SUS304 piping also plays a role in sound output, as it reduces resonation and helps our systems produce their trademark low, deep tone.

Weight Reduction - Holllow Exhaust Hangar

Because every bit of weight savings is beneficial, exhaust hangars have hollow construction to reduce weight.

Weight Reduction - Pressed Flanges

Futher weight reduction is achieved and utilized through the use of pressed SUSU304 exhaust flanges on portions of the exhaust system.

Special Dual Wall Angle-Cut Tip

While very attractive looking, the dual wall tip has the function of reducing exhaust resonation.

Slim-Line Ovar Canister with High Ground Clearance

Because of the new Advantex packing material, the canister can be much slimmer, wigh less, and reduce sound more than other systems that require large bulky canisters or multiple sub-mufflers. Medalion Touting's slim canister is pleasing to the eye, and is designed to allow for high ground clearance, for lowered vehicles.

Highest Grade SUS304 Construction

Tanabe was one of the first Japanese aftermarket companies to create full SUS304 stainless steel exhaust systems many years ago. The highest grade SUS304 stainless is used on all systems for maximum durability, as well as lightweightedness.

Streetable System - 93db Compliant, Quality Sound

Tanabe exhaust systems are well known to have one of the most unique exhaust notes avaliable. A trademark of the Tanabe exhaust system is the extremely clean, low, deep tone that is both pleasant and aggressive at all RPM ranges. Desighed for motorsports, this exhaust system is also fully steetable and is built to be under 93db when used and installed as a factory replacement exhaust.

Made in Japan, made in Tanabe®. With over 20 years of experience in the development of quality automotive parts for performance application, Tanabe take pride in all products engineered to the strictest of tolerances, produced with the highest quality materials, and made within Tanabe very own advanced ISO9001(International Organization for Standardization) and JISQ9001(Japanese Industrial Standard) certified manufacturing facility located in Shiga-city, Osaka-prefecture, Japan. Race Tested and engineered to perfection, get an edge over the competition. Fuel the racing spirit!

Brand:
Part Number:
T70113A
Alternate MPN:
T70113A

Vehicle Fitment

Lexus
IS 2006-2013

Reviews

(1)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Tanabe® T70113A - Medalion Touring™ Stainless Steel Axle-Back Exhaust System with Split Rear Exit
/5
1-1 of 1 Reviews
5 of 5
Wowed! What Fun!
Tanabe® - Medalion Touring™ Stainless Steel Axle-Back Exhaust System with Split Rear Exit
Instant increase in horsepower. Much better, more powerful sound than the original. Although the pipe diameter is larger, product fit the space and connected to the original mounting points seamlessly. Extremely easy installation, took possibly 20 minutes, but that was with a lift. I’m positive my gas mileage will improve with this product as well. Easily worth the price, and ohhhh that sound!
Posted by Kimberlea (Thunder Bay, AB) / February 17, 20192008 Lexus IS

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
CARiD FacebookCARiD TwitterCARiD YouTube ChannelCARiD PinterestCARiD Instagram
Inspiration Gallery
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.
CUSTOMER SERVICE
INFORMATION
CONTACTS