1997-2006 TJ and ,LJ and 2007-2015 JK Wranglers.
2005-2012 Tacomas, and FJ Cruisers through 2014
No
Nemesis Industries is the only brand of relocation bracket compatible with the sPOD.
No. The sPOD System includes the relays, switches and fuses. Just attach the system to the positive and negative battery terminals.
No. Our systems are "Plug and Play". The switches are pre-wired.
No. It is not compatible.
No. It is not compatible.
The sPOD fits with most aftermarket sport cages that allow the sun visors to fold up. 1997 - 2002 Jeeps equipped with a Rock Hard 4x4 sport cage will require an additional bend to the visor arm in lieu of the adapter bracket.
Company only supply SPST.
No you can not, the system will be built with only the same colors.
Yes. As long as you leave enough slack in the harness during installation for the wires to stretch over the hinge point.
The sPOD is made of Aircraft .063 5052-H32 Aluminum Alloy.
Only on 1997 - 2006 Jeeps. A single 1” diameter hole is required. The 1" rubber grommet is included in the kit.
No. It is secured with detachable connections from the factory that are easily re-attached.
None. The system is complete and ready to install.
That's entirely up to you! Just remember that ANY modifications to the system may void the warranty.
The circuits are rated for a maximum of 30 amps each. A winch draws well over that amount and should never be connected to the system!
No. However, several manufacturers offer a unit designed specifically to remotely control their winches.
Yes. As long as your compressors maximum amp draw doesn't exceed 30 amps.
Yes. The switch actuators (rocker covers) are interchangeable.
The gauge package includes: air gauge, 10’ of 5/32” dia. high pressure airline and a ¼ NPT fitting that attaches to an external tank or air manifold.
No
No. They only light up when the switch is in the “ON” position. This way, we do not need to attach to any of the OEM electrical components on the vehicle. We do offer an upgraded switch panel and harness (additional charge) that will back light the switch bank with the push of a button.