Product Details
12 fl. oz. Flat Black Aerosol Hight Temperature Paint by PJ1®. PJ1 Fast Black Exhaust System Paint (Product No 16-HIT) was originally formulated for NASA for use on reentry spacecraft As a silica-ceramic hybrid, it moves with the metal as it heats/expands and cools/contracts to give it durability PJ1 Exhaust Paint forms a protective shield against rust and corrosion It resists chipping and scratching Temperature Tolerance: Withstands up to 1500F For Use On: It is well-suited headers and expansion chambers Not for use on engines, crankcases, transmissions, or radiators!
Notes
- Not for use on engines, crankcases, transmissions, or radiators!.
Specifications
| Color: Flat Black |
| Volume: 12 fl. oz. |
| Withstands: Up to 1500°F |
| For Use On: It is well-suited headers and expansion chambers |
Features
- Blast etch or sand to expose bare metal
- Remove all loose debris
- Flush surface with non residue evaporative cleaner such as PJ1 Super Cleaner (Product Number 3-20, 3-21(CA Compliant))
- Apply paint within 24 hours
- Shake can vigorously for a full minute Apply 3 or 4 thin even coats Shake can between coats More thin coats are better than fewer thick coats
- Perfect for powersports or motorsports applications
- Made to cover your lubrication needs
- Will provide extreme weather protection
- Rust and corrosion control ensures longevity
- High temperature tolerance and chemical resistance
Application Instructions:
- Blast etch or sand to expose bare metal.
- Remove all loose debris.
- Flush surface with non residue evaporative cleaner such as PJ1
- Super Cleaner (Product Number 3-20, 3-21(CA Compliant))
- Apply paint within 24 hours.
- Shake can vigorously for a full minute. Apply 3 or 4 thin even coats.
- Shake can between coats. More thin coats are better than fewer thick coats.
Heat Curing On the Vehicle:
- Run at idle for 10 minutes.
- Cool for 20 minutes.
- Run at idle for 20 minutes.
- Cool for 20 minutes.
Heat Curing Off the Vehicle:
- Let paint dry completely.
- Let paint dry completely.
- Heat to 250F/121C for 30 minutes.
- Cool for 30 minutes.
- Heat to 400F/204C for 30 minutes.
- Cool for 30 minutes. Heat to 650F/343C for 30 minutes.
As the forerunner in powersports lubrication, PJ1® offers a wide selection of first-rate oils, paints, lubricants, and maintenance products. The company’s products set the standard for durability, lubrication, rust and corrosion control, extreme weather protection, chemical resistance, and high temperature tolerance. Designed to provide you with maximum results, PJ1 products are the ones you can rely on. They deliver unequaled performance and ensure superior longevity. As PJ1 constantly researches the demands of its customers to bring them the most advanced and the highest quality products, PJ1 is the only name to keep in mind.