PIRELLI TIRES® - P ZERO A/S

The asymmetric tread design offers precision handling in all conditions, even at the limit. A solid center rib gives a constant and consistent contact patch with the road, while requiring shorter braking distances and offering quicker acceleration in both dry and wet conditions. Four longitudinal and numerous lateral grooves minimize the risk of aquaplaning when cornering.

The P Zero Nero All Season provides a winning combination of quiet ride, precise cornering and superior grip in both wet and dry driving conditions. It features a growing list of original equipment fitments and replacement sizes, both in conventional and Run Flat constructions.

P Zero Family is the maximum expression of Pirelli's "Ultra High Performance" philosophy. Enhancing the performance of modern supersports cars and their most "extreme" versions, these tires have also been designed for occasional race track use. Ideal for powerful sedans and mid-range vehicles.

Pirelli tires have a stiff construction and do not usually require higher inflation pressures. They are designed for use at a pressure of approximately 2 bar, which is to be adjusted according to the vehicle type. The indicated figure refers to the “operating pressure”: the pressure of the tire when it is fully warmed up to working temperature. For accurate calibration, it is essential to consider that the difference in temperature between a “cold” tire and a “hot” one is quite significant, normally 0.5 bar.

Pirelli recommends the use of ordinary compressed air to inflate the tires, provided that the above procedures are followed. No special gases, such as nitrogen, are required unless the source of air is exposed to excessive humidity.

Always use a high-quality air pressure gauge in order to obtain reliable results. We also recommend that the valve stems of the wheels should be metal, instead of rubber, as they are more resistant to high temperatures.