MagnaFlow® 99306HM - Heavy Metal Universal Fit Round Body Catalytic Converter

0 reviews|Item # mpn1038339|Similar Products
$188.00
In Stock (88) - Ships within 24 hrs
Vehicle Specific
  • Please Select Vehicle Below
Notes:
  • Installation may involve welding and cutting
  • This is a Federal (EPA) compliant part, legal for use on vehicles built to meet Federal EPA standards ONLY. It is NOT legal for installation on vehicles required to meet CARB standards and/or registered in California and other states following CARB standards, including NY, ME & CO
Authorized Dealer

Product Details

Heavy Metal Catalytic Converter (99306HM) by MagnaFlow®. Converter Configuration: Universal Fit. Catalytic Converter Body Shape: Round. Without Air Tube. With Post-Cat O2 Sensor Port. Catalytic Inlet Diameter: 2.5". Catalytic Outlet Diameter: 2.5". Catalytic Converter Overall Length: 15". If your car needs a new catalytic converter, install one that will get you through the smog check. This universal fit converter will require some fabrication to be installed, which will involve cutting the exhaust pipe and may require welding.

Notes

  • Installation may involve welding and cutting
  • This is a Federal (EPA) compliant part, legal for use on vehicles built to meet Federal EPA standards ONLY. It is NOT legal for installation on vehicles required to meet CARB standards and/or registered in California and other states following CARB standards, including NY, ME & CO

Specifications

Catalytic Series: Heavy Metal
Converter Configuration: Universal Fit
Converter Body Material: Stainless Steel
Catalytic Converter Substrate Material: Ceramic
Catalytic Converter Body Shape: Round
Inlet Connection Type: Weld-On
Outlet Connection Type: Weld-On
Inlet Position: Center
Outlet Position: Center
Catalytic Inlet Diameter: 2.5"
Catalytic Outlet Diameter: 2.5"
Catalytic Converter Width: 4.25"
Main Piping Diameter: 2.5"
Catalytic Converter Body Length: 11"
Catalytic Converter Overall Length: 15"
Air Tube: No
O2 Sensor Port: Yes
Catalytic Converter Format: Pre-Catalytic Converter and Main Catalytic Converter
Catalytic Converter Oxygen Sensor Location: Post Converter
Installation Complexity: Professional Installation Recommended
Body Type: Clam Shell

Features

  • Reduces harmful emissions
  • Increased exhaust flow allows your engine to make more power
  • Requires fabrication or modifications to be installed into exhaust system
  • Cutting and welding may be required; consider professional installation
  • Ribbed body to minimize expansion and distortion, holding the ceramic catalyst in proper alignment
  • Strongest and smoothest flowing inlet and outlet joint of any manufacturer
  • Each inlet tailored to the size of the converter body
  • Converter body manufactured from heavy-duty stainless steel
  • Seam welded for a strong, tight bond
  • Available in Pre-OBD II, OBD II, and OEM Grade OBD II configurations
  • On vehicles registered outside California, the converter is warranted against construction defects for 5 years and against emissions failure for 25,000 miles
  • On vehicles registered within California, the converter is warranted against construction or emissions check failure for 5 years or 50,000 miles
  • Proudly made in the USA

MagnaFlow builds their converters to last. The converter body is manufactured from heavy-duty stainless steel for maximum durability. All converters are seam welded close to the converter body for a strong, tight bond, not along the edge, which would allow the converter to expand and let the catalyst move around. And the aluminized steel or stainless steel heat shield creates a rigid wall of protection against heat and adds to the structural stability of the converter.

This Catalytic Converter is a universal fit unit and will require some fabrication or modification to the exhaust system to be installed. Cutting and welding may be required, so you may want to consider professional installation. It's available in OBD II (On-Board Diagnostics, 2nd Generation), Pre-OBD II, and OEM Grade OBD II configurations. Pre-OBD II is for early vehicles (generally 1995 or older), which were equipped with 2-way, 3-way, or 3-way with air injection converters. Two-way converters oxidize harmful Hydrocarbons (HC) and Carbon Monoxide (CO) along with secondary oxygen into water (H2O) and Carbon Dioxide (CO2). Along with the previously detailed conversion, a 3-way converter also reduces oxides of nitrogen (NOx) into Nitrogen (N2). The 3-way with air injection converter operates the same as a 3-way converter but with the addition of air pumped into the converter to improve the oxidation capabilities.

OBD II converters are for 1995 and newer vehicles and are 3-way converters. OEM Grade OBD II converters are for vehicles registered outside of the state of California, with California spec emissions. More precious metals are applied to the substrate on these converters to further reduce emissions. To determine if this converter is right for your vehicle, find the VECI (Vehicle Emissions Control Information) label in the engine compartment and look for the word "California" on the label.

On vehicles registered outside the state of California, MagnaFlow warrants the Catalytic Converter to be free of manufacturer's defects for a period of 5 years and emissions failure for 25,000 miles. Catalytic Converters on vehicles registered in California carry a 5 year, 50,000 mile warranty against manufacturer's defects and emissions failure.

MagnaFlow® has been in business for more than 30 years, with its slogan "Quality – Power – Sound" leading the company on its steady path to success. MagnaFlow is the market leader in exhaust systems. No other brand has managed to fulfill the demands auto enthusiasts have on their exhaust systems, while still complying with emission standards, as MagnaFlow has. The product line is steadily expanding, introducing new, cutting edge technologies and designs. MagnaFlow is the leader in exhaust system design and the company is determined to stay in the lead.

Brand:
Part Number:
99306HM
UPC:
841380031297

Vehicle Fitment

Audi
S8 2001-2003
Buick
Century 2001-2005
Le Sabre 1996-2005
Park Avenue 1996-2005
Regal 1996-2004
Riviera 1995-1999
Terraza 2005-2006
Cadillac
Deville 2000-2005
Eldorado 2000-2002
Seville 1998-2001
Chevy
Astro 2000-2005
Camaro 1995-2002
Equinox 2005-2006
Impala 2000-2011
Lumina 1996, 1998-1999
Monte Carlo 1998-2007
Uplander 2005-2006
Venture 2001
Ford
E-series 2005-2007
GMC
Safari 2000-2005
Sonoma 2001-2003
Jeep
Grand Cherokee 2005-2006
Mercedes
CL Class 1998-1999
SL Class 1996-2002
Nissan
Pick Up 1996-1997
Oldsmobile
Aurora 2001
Eighty-Eight 1996-1999
Intrigue 1999-2002
Ninety-Eight 1996
Silhouette 1996
Pontiac
Aztek 2002-2003
Bonneville 1997-2004
Firebird 1995-2002
Grand Prix 1997-2003, 2006-2007
Montana 2005-2006
Torrent 2006
Trans Sport 1996
Volvo
V90 1997-1998

Reviews

(0)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
MagnaFlow® 99306HM - Heavy Metal Universal Fit Round Body Catalytic Converter
/0

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
CARiD FacebookCARiD TwitterCARiD YouTube ChannelCARiD PinterestCARiD Instagram
Inspiration Gallery
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.
CUSTOMER SERVICE
INFORMATION
CONTACTS