In order to ensure a proper fit, please measure your truck bed prior to purchasing your new LEER tonneau cover.
1. Place the end of your measuring tape at the bulkhead of your truck bed.
2. Moving down your bed rail, measure to the inside edge of the top of your tailgate.
3. Most truck manufacturers round their bed sizes, so choose the option in the fitment bar that is closest to your measurement.
When factory-installed on a LEER Model 100XQ, 100XL, 100XR, 100R, 100RCC, 180, 180CC, or 122, the Thule AeroBlade has a maximum load capacity of 220 lbs. and Tracker II Roof Rack systems have a maximum load capacity of 165 lbs. There are other critical factors when safely carrying and securing loads to your roof rack and dash - always refer to the owner's manual provided with your Thule roof rack prior to use.
Check with your local LEER Dealer, as they can sometimes provide a replacement set of keys on-the-spot. If they don't have the keys you need, they will contact LEER on your behalf. If your lock is one currently in production, their will send a set of keys to your Dealer. If your lock is no longer in production, the lock itself will have to be replaced by your local LEER Dealer.
Although dimensions appear to be similar for many truck models, most LEER molds will only fit the make/model/style of truck they were originally designed for. In many cases, a particular truck style is in production for several years with virtually no change, and a cap will fit any model year during the run of a particular body style. Beyond that, dimensions, angles, clearances, heights, and styling details are varied enough that it is unlikely that any cap can "cross over" from one truck to another. If you want to pursue it, Leer recommend a trial fit on the truck.
LEER utilizes three factories (located in Milton, PA; Elkhart, IN; and Woodland, CA) to produce its fiberglass truck caps and tonneaus. Each factory uses its own sets of molds and buys local parts and assemblies when possible. Each is also able to make subtle variations that suit the region of the country where their products are sold. Of course, the major features, styling, warranty and quality of LEER products all meet the same high standards no matter where they are produced.
Check with your LEER Dealer, as they often have logos on hand and can get them to you quickly. If your dealer does not have the logo you need in stock, you can also email Leer with your request and they can assist you. Make sure you include your street address in your email. Wherever possible, their replace logos as a courtesy to Leer customers.