Vibe Series 3-Way Electronic Crossover Network by Lanzar®. Make other drivers green with envy by a loud and perfectly clear sound out of your vehicle. Top-shelf amplifiers are all you need to increase the volume of music without distortion as well as power your woofers or subwoofers.
- 3-Way Electronic Crossover
- Hi-Pass Crossover: 32Hz-800Hz For Front & Rear Channels
- X10 Frequency Multiplier For Front Channel
- Low-Pass Crossover: 50Hz-160Hz For Subwoofer Channel
- 12dB Per Octave Crossover Slope
- Variable Bass Frequency: 40Hz-120kHz
- Boost Level: 0-12dB
- Parallel Input Switch, Mixed In/Out Switch
- Remote Subwoofer Level Control
- Power On LED Indicator
- Power Source: 14.4 V DC Negative Ground
- Input Current: 0.5 A
- Frequency Response: 10 Hz - 30k Hz +/- 3 dB
- Signal to Noise Ratio: > 95 dB
- Separation: 60 dB
- Input Impedance: > 10k Ohms
- Output Impedance: < 1k Ohms
- Output Gain: +3 dB
- Output Voltage: 5 V
- Dimensions: 7.5''H x 7''W x 1.4''D
- Sold as Unit
Acheive maximum performance and fine-tune your audio setup with the VIBE Series Electronic Crossovers. These crossovers are specially engineered to split the audio signal into individual frequency bands that can be separately routed to loudspeakers optimized for those bands. Experince full and rich sounds when you enable Bass Boost that smoothens the subsonic frequencies. Reach all ends of the audio spectrum from low frequencies to high frequencies when you configure your highs, lows and mids with the VIBE Series Electronic Crossovers!
Lanzar® car audio are some of the most advanced pieces of automotive electronics. These Lanzar products are the result of an extensive engineering program with the sole purpose of creating the finest in mobile audio. Lanzar believes in craftsmanship, quality, and accuracy! It takes all of these to deliver true quality performance in both construction and sound reproduction.