JIMS Motorcycle Performance Parts & Tools

Categories

Show items:
Sort by:
    • (0 reviews)
      # mpn4526335986
      Compression Release Valve by JIMS®. These release valves make starting your engine effortless by venting cylinder compression with just the push of a button. JIMS® has found these to be indispensable when used with JIMS® Stroker Kits....
      Can be installed in all Big Twin, XL and Buell motorsFits dual-plug heads or heads that have been machined for dual plugs
      $128.38
    • (0 reviews)
      # mpn4526335746
      Rocker Shaft by JIMS®. Std. O.D. is .554". Designed with precision and functionality in mind, this accessory ensures outstanding performance and easy use which makes it the perfect deal for your ultimate satisfaction. If you’re...
      Made in USAUnique design to meet your tastes and preferences
      $35.43
    • (0 reviews)
      # mpn4526336004
      Rocker Arm Reamer by JIMS®. Use to ream rocker bushings to a factory fit of .0007"-.0012" in line with each other. This precise line reamer is capable of a 24 finish or better. If you’re looking for a quality product that will serve...
      Made in USAUnique design to meet your tastes and preferences
      $250.47
    • (0 reviews)
      # mpn4526335830
      Rocker Arm Bushing by JIMS®. Replacement bushings made from solid bronze bar stock. If you’re looking for a quality product that will serve you for years to come, look no further.
      Made in USAUnique design to meet your tastes and preferences
      $57.32
    • (0 reviews)
      # mpn4526335997
      Rod Alignment Tool by JIMS®. Use to check rod straightness without removing rods from case. The alignment tool is 4-1/2" long. If you’re looking for a quality product that will serve you for years to come, look no further.
      Made in USATools designed to fulfill the needs of motorcyclists
      $36.11
    • (0 reviews)
      # mpn4526335983
      Valve Guide Tool by JIMS®. These valve guide installer tools will install each guide to the correct depth when installed into head. Remover handles are used as handle for installer tools. If you’re looking for a quality product that...
      Made in USATools designed to fulfill the needs of motorcyclists
      $52.47
    • (0 reviews)
      # mpn4526335977
      Oil Pump Snap Ring Installer by JIMS®. Easily install outer snap ring on oil pump shaft, without over stretching the ring. Just apply oil to ring expander, slip ring up to the big end of ring expander, hold up to the end of the shaft,...
      Made in USATools designed to fulfill the needs of motorcyclists
      $84.06
    • (0 reviews)
      # mpn4526336007
      Oil Pump Seal Installer by JIMS®. Easily installs oil pump seal perfectly below gear surface for a no leak fit. If you’re looking for a quality product that will serve you for years to come, look no further.
      Made in USATools designed to fulfill the needs of motorcyclists
      $108.38
    • (0 reviews)
      # mpn4526335988
      Tappet Adjustment Tool by JIMS®. Designed and submitted by Hiro Koiso, a hands-on technician and JIMS sponsored Bonneville record holder in numerous classes; this patent pending hand tool simplifies the way to verify proper tappet...
      Made in USATools designed to fulfill the needs of motorcyclists
      $35.52
    • (0 reviews)
      # mpn4526335884
      Exhaust Stud Drill Plate by JIMS®. This tool is designed to guide and keep alignment of drill bit in order to completely drill out broken exhaust stud. A follow up with a tap is all that is needed to clean up threaded hole. This tool...
      Made in USATools designed to fulfill the needs of motorcyclists
      $140.87
    • (0 reviews)
      # mpn4526335941
      Exhaust Pipe Retaining Ring Installation Tool by JIMS®. Sometimes it's the simple tool that makes the biggest difference. This patent pending installation tool quickly and easily installs the exhaust pipe retaining ring on almost all...
      Made in USATools designed to fulfill the needs of motorcyclists
      $94.63
    • (0 reviews)
      # mpn4526335748
      Hydrosolid Tappet by JIMS®. This tappet replaces and surpasses H-D® No.18538-99. Use with JIMS® No.1043 billet lifter covers. If you’re looking for a quality product that will serve you for years to come, look no further.
      Made in USAUnique design to meet your tastes and preferences
      $132.97
    • (0 reviews)
      # mpn4526335765
      Powerglide Tappet by JIMS®. Oversize Twin Cam Powerglide II Tappet. Same trusted big axle design as the original Powerglide. Solid billet body manufactured in-house. If you’re looking for a quality product that will serve you for...
      Increased top end oilingOiling to axle, roller and cam assembly
      $152.11
    • (0 reviews)
      # mpn4526336092
      Sprocket Shaft Seal Installation Tool by JIMS®. Use to press oil seal over sprocket shaft into case. If you’re looking for a quality product that will serve you for years to come, look no further.
      Can also be used on aftermarket and S&S® motorsUse with P/N 496106 (Mfg/N 97225-55)
      $122.85
    • (0 reviews)
      # mpn4526335890
      Flywheel Runout Inspection Gauge by JIMS®. Check flywheel runout of the pinion shaft while assembled in engine case. Also checks the amount of gear lash on gear driven cams used in some twin cam engines. By using a JIMS tire rotator No....
      Made in USATools designed to fulfill the needs of motorcyclists
      $138.10
    • (0 reviews)
      # mpn4526335864
      Mega Nut by JIMS®. JIMS now offers both early and late Mega Nuts. Once you install these left handed threaded nuts correctly they won't come loose with this exclusive lock plate design. They can also be used on BDL sprockets also. When...
      Made in USAUnique design to meet your tastes and preferences
      $95.89
    • (0 reviews)
      # mpn4526335951
      O2 Sensor Thread Chaser by JIMS®. Size: 12 mm. Use to remove any I.D. thread damaged from either exhaust carbon or the mating components, both in aluminum or steel. If you’re looking for a quality product that will serve you for years...
      Made in USATools designed to fulfill the needs of motorcyclists
      $38.92
    • (0 reviews)
      # mpn4526336089
      Big Twin Sprocket Locker by JIMS®. Use to lock final drive sprocket, for removing and installing sprocket nut. If you’re looking for a quality product that will serve you for years to come, look no further.
      Made in USATools designed to fulfill the needs of motorcyclists
      $177.63
    • (0 reviews)
      # mpn4526335940
      5-Speed Main Drive Gear Tool by JIMS®. Use to remove and install the main drive gear. Also installs the main bearing without removing transmission case. This tool will not damage bearing or main drive gear during installation. If...
      Made in USATools designed to fulfill the needs of motorcyclists
      $261.78
    • (0 reviews)
      # mpn4526335904
      Valve Guide Seal Tool by JIMS®. These valve guide seal installer tools will install each guide seal evenly and square on the top of each guide. Factory driver spacer not required with JIMS tool. Order handle separately for use on seal...
      Made in USATools designed to fulfill the needs of motorcyclists
      $69.16
    • (0 reviews)
      # mpn4526335982
      Head Bolt Torque Gauge by JIMS®. This accurate gauge allows the measuring of 90° when tightening Twin Cam® or Evo head bolts. Torque sequence lasered on gauge, with instructions. If you’re looking for a quality product that will...
      Made in USATools designed to fulfill the needs of motorcyclists
      $24.96
    • (0 reviews)
      # mpn4526335990
      Dual Gauge Leakdown Tester by JIMS®. Includes a 12 mm and a 10 mm adapter. Gages comes with protective rubber cover. The hose assembly has both 14 mm and 18 mm spark plug threads. The tool is easy to use and will troubleshoot cylinder...
      This tester can be used on all models and aftermarket motorsThe hose assembly features 14 and 18 mm spark plug threads
      $160.18
    • (0 reviews)
      # mpn4526336002
      Main Drive Gear Seal Installer by JIMS®. Use to install the main drive gear oil seal to the proper depth with transmission assembled. Comes with a protective sleeve for seal. Jims recommend using JIMS® seal No's.12013A & 12035A. The...
      Made in USATools designed to fulfill the needs of motorcyclists
      $119.21
    • (0 reviews)
      # mpn4526335972
      5-Speed Transmission Main Seal Tool by JIMS®. Use to install the main seal in transmission. This tool will press in the seal as flat and straight as possible to .050" below housing for a no leak fit. If you’re looking for a quality...
      Made in USATools designed to fulfill the needs of motorcyclists
      $107.99
    • (0 reviews)
      # mpn4526335956
      Mainshaft Sprocket Nut Socket Tool by JIMS®. Heavy-Duty thick wall tube. Extra long two piece design, inner collar will retain wrench to nut for safer service work. 1-7/8" hex, 1/2" Drive. If you’re looking for a quality product that...
      Heavy wall, 1/2" drive socket comes with a pilot designed to thread onto the shaft to protect the threads of the mainshaftMade in USA
      $195.89
    • (0 reviews)
      # mpn4526335927
      Twin Cam Inner Cam Bearing Installer Tool by JIMS®. Use this tool to easily remove the inner cam bearing. Works the same as JIMS® EVO Cam tool No.95760-TB. Insert puller collet into the cam bearing I.D. Insert dowel pin, place remover...
      Made in USATools designed to fulfill the needs of motorcyclists
      $227.17
    • (0 reviews)
      # mpn4526335936
      Crankshaft Bushing Tool by JIMS®. This tool will remove and install crankshaft bushings in the support plate on a Twin Cam®. This tool is piloted for accurate operation. If you’re looking for a quality product that will serve you for...
      Made in USATools designed to fulfill the needs of motorcyclists
      $152.33
    • (0 reviews)
      # mpn4526336085
      Valve Guide Reamer by JIMS®. Size: 7 mm. These unique reamer feature a 2" long pilot for perfect alignment with the valve guide while reaming. With these reamer you can expect to ream a valve guide to exact dimensions without any taper...
      Made in USATools designed to fulfill the needs of motorcyclists
      $185.40
    • (0 reviews)
      # mpn4526335766
      5-Speed Door Puller by JIMS®. With Exhaust Mount. This tool easily removes door away from transmission with gears and shafts attached. If you’re looking for a quality product that will serve you for years to come, look no further.
      Use to remove Big Twin 5-speed transmission doorPuller will not damage door bearings
      $131.39
    • (0 reviews)
      # mpn4526335903
      Main Case Seal Installer Tool by JIMS®. The 6-speed transmission is a very stout piece of engineering, incorporating some of the best bearings made. These main case bearings are of such high precision that you must be very gentle when...
      6-SpeedInstalls the main seal to the correct depth, without applying any stress to the new precision bearings or new seals
      $79.80




    Low Prices Price match guarantee
    In-House Experts We know our products
    Guaranteed Fitment Always the correct part
    Easy Returns Quick & Hassle Free

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.

    SECURE SHOPPING