Name: Hays® 97-1H32Q - Twister 3/4 Race Torque Converter
Brand: HAYS
SKU: mpn4485674642
Price: 669.95 USD
Availability: OutOfStock

Vehicle Fitment

This part is universal

Fits Following Transmissions: GM 4L60E
Fits Following Transmissions: GM 4L65-E

Product Details

Twister 3/4 Race Torque Converter (97-1H32Q) by Hays®. Diameter: 9.6". Teeth Quantity: 30. Stall Speed: 3200-3600. Torque Converter Bolt Pattern: 11 1/8". Hays Twister 3/4 Race performance torque converters are a perfect addition to HAYS line of performance flexplates, clutches, and flywheels. HAYS 3/4 Race series of torque converters is intended for street/strip combinations, with various stall speed offerings to accommodate any mixture of modifications including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. The Twister 3/4 Race torque converter perfectly describes a converter suited for an application just shy of Full Race converter. Hays Twister 3/4 Race Torque Converters--Good names never go away, and neither should good terms!

Notes

Not designed to be used with Nitrous Oxide or Trans-Brakes
Recommended to use with external transmission cooler (a minimum size of 18,000 GVW or 15,000 BTU Rating)
Stall ranges will vary depending on engine set-up, weight of vehicle and gear ratio
Legal for use on Uncontrolled (Non-Emissions Controlled) or Racing Vehicles

Specifications

Anti-Balloon Plate No

Balanced Yes

Bolt Circle 11 1/8"

Brand Hays

Crank Pilot Diameter: 1.703"

Diameter: 9.6"

Emission Code: 3

Input Spline: 30

Lock Up/Overdrive: Yes

Stall: 3200-3600

Use with Power Adder: No

Use with Transbrake: No

Features

3/4 Race series converters are built, tested, and proven to support up to 650 HP.
State of the art Spray Welding process is used in select areas. Spray Welding provides clean, strong and consistent fusion while also increasing strength through hardening from higher process temperature
Each converter is hand-built and inspected in every step of assembly to ensure top of the line quality
All HAYS converters are internally welded compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency
Heavy duty Torrington bearings are used for greater strength and durability
Stators are chosen with high flow vents and channels to promote cooling in heat producing higher horsepower applications
Increased horsepower and acceleration due to a weight saving, one application design. Almost all HAYS converters are built for one application to reduce weight compared to a multi-bolt pattern converter.
Industry leading Tech Support Team is available to provide assistance with stall speed selection

HAYS is here with excellent products that are available at a competitive price. The company does its utmost to provide the best possible solutions for your needs. All products by HAYS are made with expert care and created by professionals to meet all your requirements. HAYS does not accept compromises when it is going about quality, so you can be sure that all products have only first-rate quality. With many years of manufacturing experience, HAYS is the name you can trust.

Hays® is known as a foremost automotive manufacturer. It offers an extensive line of performance flywheels, pressure plates, balance plates, flexplates, lightweight flexplates, clutch discs, clutch kits as well as clutch accessories and components. All Hays products are carefully engineered with attention to the smallest detail to ensure unparalleled quality and value. Manufactured from top-grade materials, Hays products provide high performance and efficient service for decades to come.

Brand:

HAYS

Part Number:

97-1H32Q

UPC:

090127017388

Alternate MPN:

971H32Q

Warranty

ACCEL PERFORMANCE GROUP WARRANTY INFORMATION

LIMITED NINETY (90) DAY AND OTHER LONGER PERIOD WARRANTIES

ACCEL Performance Group, which includes ACCEL, Hays, Lakewood, Mallory and Mr. Gasket product lines, warrants its products only to the original purchaser at retail to be free from defects in material and workmanship for a period of 90 days from the date of original retail purchase.

WHAT IS NOT COVERED:

Products which have been subjected to abuse, accident, alteration, modification, improper installation, improper operational adjustments, tampering, negligence, misuse, or if repaired or serviced by anyone other than ACCEL Performance Group. Actual or alleged labor, transportation or other incidental charges. Actual or alleged consequential damages incurred by use of this product. Specific for wire sets only: any wires which are burnt, abraded, cracked, torn, ripped, cut or otherwise damaged due to improper installation.

WHAT THEY WILL DO:

ACCEL Performance Group, at its election, will either repair or replace all defective parts free of charge. WHAT YOU MUST DO FOR THE WARRANTY SERVICE: In the event that the original purchaser detects a defect in the material or workmanship, the product(s) in question must be returned by the original retail purchaser to the place of original purchase for warranty determination.

NO OTHER WARRANTY, EXPRESS OR IMPLIED, IS APPLICABLE TO THE PRODUCTS OR ACCEL Performance Group. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. ACCEL Performance Group SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR INABILITY TO USE, THE PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO THIS PRODUCT.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary state to state.

Materials, components, specifications, colors, model changes, availability and prices are subject to change without notice or obligation.

Manufacturers’ brand names, trademarks and registered trademarks are used for reference only and are not to imply that any product is of their manufacture or any association herewith.

ACCEL Performance Group makes no representation or warranty, express or implied, that its products comply with local, State or Federal emission levels, noise levels or safety standards. The purchaser assumes all responsibility for such use and compliance.

AIRCRAFT WARNING - The products sold by ACCEL Performance Group (ACCEL, Mr. Gasket, Mallory, Lakewood, Hays, QuickTime) are not engineered, nor manufactured, for use in any type of aircraft. ACCEL Performance Group expressly cautions against the use of any of its products in any type of aircraft. ACCEL Performance Group expressly disclaims any and all liability, lawsuits, claims, actions, damages, judgements and costs, to any person or property, that arise out of, or are in any way, directly or indirectly, related to the use of its products in any type of aircraft. If you choose to ignore this warning, you knowingly assume all risks, liabilities, lawsuits, claims, actions, damages, judgements and costs, of any type or variety, that arise out of, or are in any way, directly or indirectly, related to your use of any ACCEL Performance Group product in any type of aircraft.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Hays® 97-1H32Q - Twister 3/4 Race Torque Converter

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!