GB Remanufacturing® - Remanufactured Multi Port Fuel Injector

10 reviews|Item # sp5312|Similar Products
$17.75 - $139.58
Availability Varies - Depends on Product Options
Vehicle Specific
  • View Product Options
Authorized Dealer

Product Details

Remanufactured Multi Port Fuel Injector by GB Remanufacturing®. OE-quality at a reduced cost is what you'll get with this new multi-port fuel injector. This injector is an exact OEM replacement part, so it guarantees factory-like fit, form, and function.

Features

  • Affordable alternative to a new OEM injector
  • Meets or exceeds OE quality
  • Ensures reliable and lasting operation
  • OE fit, form, and function
  • 100% tested to ensure OE-quality or better performance
  • Each Injector includes new external seals and o-rings

The multi-port fuel injection (MPI) system was a significant improvement over the carburetor and throttle body injection systems it replaced as it provides much better fuel control. This system operates using one injector per cylinder positioned in the intake manifold above each intake valve. Fuel is injected onto the intake valve where it is mixed with the air and sent to the combustion chamber. A faulty multi-port fuel injector can lead to problems such as high emissions, decreased fuel economy, poor performance, etc. If you need a cost-effective solution to a faulty injector, GB Remanufacturing will meet all your demands.

With its extensive line of remanufactured fuel injectors, GB is just the ticket for drivers who expect reliable performance and don't want to pay high dealer costs. The experts at GB restore the part to a condition that is equal to, or often better than, that of a new OEM product by reusing the components that don't wear out and carefully replacing all faulty units. GB utilizes the latest cleaning equipment, ultrasonic baths, flow benches, and computers to ensure that every remanufactured fuel injector meets or exceeds OE requirements. Plus, GB carefully analyzes all failure modes and makes upgrades to prevent failure of the part in the future, so in many cases a GB Remanufacturing injector is better than new.

This multi-port fuel injector features the same fit, form, and function as the original part because all injectors remanufactured by GB are exact OEM replacement parts, not similar or aftermarket injectors. In the remanufacturing process, each injector is cleaned, degreased, and subjected to a coil resistance test. After that, the injector is ultrasonically cleaned using state of the art equipment, reversed/back flushed, and put through a battery of tests such as spray pattern, leak down, flow rate tests, etc. Before the technicians install new components and make a final inspection, each injector is polished, clear-coated, and lubricated.

Established in 1986 with headquarters in California, GB Remanufacturing® provides rebuilt OEM fuel injectors for both gasoline and diesel applications, injector components, and diesel electronics to the automotive aftermarket. GB is also a trusted supplier of new fuel delivery parts. Since it was founded as a small family owned company by Mike Kitching and his father, William, GB has steadily grown to become a worldwide supplier of fuel system parts and the largest remanufacturer of fuel injectors in the USA. When GB remanufactures a product, it carefully analyzes all of the failure modes and makes upgrades to prevent future failure of the part whenever possible. It utilizes state of the art specialized equipment, including proprietary tools, to ensure that its customers receive the most reliable product possible.

Reviews

(10)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
GB Remanufacturing® - Remanufactured Multi Port Fuel Injector
/5
1-10 of 10 Reviews
Spraying gas everywhere.
Posted by Trevor (Lebanon, PA) / January 20, 20212003 Subaru WRX
I had bought a cheaper option from Shamazon and had nothing but problem. The o-rings were not spec and leaked gas immediately. These work great!
Posted by Customer / July 07, 20202000 Toyota Sienna
1 of 5
Stear Clear of GB Remanufacturing
GB Remanufacturing® - Remanufactured Multi Port Fuel Injector
Purchased 6 GB Remanufactured Injectors for my 84 300 ZX. After the work was done, picked up the car and smelled gasoline. The mechanic said 2 of the injectors leaked. Paid $343.68 to have them replaced. Next summer smelled like gas again. A different mechanic showed a third wet fuel injector. $360 for another repair. Called GB last fall to see about covering labor on faulty injectors since the mechanic can't test until installed. I was told they can cover labor, if they receive documentation from the company they sold the part to. I was unable to get the documentation up the chain to GB. I called back this summer when I found out a third injector failed and I was told by the manager they never did have a labor reimbursement policy. Failed on all three accounts: Craftsmanship, integrity and trust.
Posted by Christopher (Sauk Rapids, MN) / April 29, 20201984 Nissan 300ZX
The injectors came very quickly. Each was sealed in a vacuum packed bag with care. There were no problems at all, they work like new.
Posted by Ben (Berkeley, CA) / January 30, 20181988 Chevy Celebrity
Ready to install.
Posted by Chris (San Lorenzo, CA) / May 07, 20171987 BMW 3-Series
Easy to install and no tuning necessary.
Posted by Alex (Oroville, WA) / February 20, 20172004 Mitsubishi Lancer
5 of 5
Excellent Fuel Injector
The injectors are an exact match for the original equipment. Installation was fast and simple. The power gain and increased mpg is phenomenal!
Posted by Mark (Rocky Mount, VA) / November 18, 20141987 Honda Accord
5 of 5
Good
Good.
Posted by Dan Nadler (Pembroke Pines, FL) / July 16, 20142005 Volkswagen Touareg
I would recommend this to everybody. This is a perfect fit for my car. I used it on my Toyota 4Runner. My vehicle gained its performance back and my gas mileage improved. It also comes with the seals, so no need to purchase a set of seals.
Posted by John (Girard, OH) / April 22, 20141989 Toyota 4Runner
5 of 5
Highly Recommended
Got them today and they looked brand new. These are very good. Installed fuel injectors and my car backed to normal. I would buy them again, except I will never have problem with fuel injectors, because them will never fail. I highly recommend this company for any fuel injectors.
Posted by Stephen (Middletown, MD) / April 19, 20141986 Dodge Charger
CARiD FacebookCARiD TwitterCARiD YouTube ChannelCARiD PinterestCARiD Instagram
Inspiration Gallery
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.
CUSTOMER SERVICE
INFORMATION
CONTACTS