Even if you don't put a ton of miles on your vehicle, you should inspect your tires at least once a month and always before long trips. It's important to keep an eye out for excessive or irregular tread wear, underinflation, or damage like scrapes, bulges, cracks, punctures and more. If any of these conditions are present, or if you are experiencing continuous pressure loss, the tire should be dismounted and inspected for damage by a trained tire professional to determine if a repair can be made.
To help maintain even treadwear and prolong tire life, review this quick reference about alignment, rotation, and visual inspections.
Misalignment of the front or rear wheels can cause rapid or uneven wear. Front-wheel-drive vehicles and those with independent rear suspension require alignment of all four wheels, instead of two. Getting your alignment checked as specified in your vehicle's owner's manual is the recommended way to prolong tire life.
Sometimes irregular tire wear can be corrected by rotating your tires. Consult your vehicle's owner's manual. If your tires show uneven wear, ask a Dunlop expert to check for and correct any misalignment, imbalance, or other mechanical problem involved before rotation.
A tire's tread directly affects how it grips the road, so it's important to regularly inspect it visually for signs of uneven wear. These signs can include high or low areas, or unusually smooth ones.
Inspecting your tires can help you find punctures or other visible signs of damage that could necessitate replacement.
It's crucial to know when it's okay to have a tire repaired and when a tire should be replaced.
Having your tires balanced and your vehicle properly aligned is important for tire longevity and vehicle performance.
Once you find the series of numbers on your tire’s sidewall, use the diagram above and the list below to find the meaning of each number.
In addition to your tire’s sidewall, you may also find your tire size in the following places:
Here are some tips to help you manage challenging driving conditions and cut costs at the pump.
When it's time to head out, keep a few of these tips in mind.
1. If your windows are fogging up, use the air conditioner to dehumidify the air inside of your vehicle. If you don't have an air conditioning system, open the rear windows a crack to allow air to circulate.
2. Slowing down on wet roads is crucial. A wet road surface will offer the driver less grip compared to a dry road surface. Plus, braking distances can double and the ability to steer around an obstacle can be reduced.
3. Keep a further distance from the vehicle in front of you since braking distances can be longer on wet roads. Staying back will also take you away from the tire spray of the vehicle in front of you, giving you better visibility.
4. Vision technique is paramount to safe driving. Look further up the road and always look to where you want to be going.
5. Jerky or rushed steering can cause loss of control, especially on rain-slicked roads. Drive with smooth steering inputs.
Driving in snow and ice can be a challenge. However, there are a handful of ways you can help make driving in winter conditions a safer, less stressful experience.
One important thing to remember when driving in winter conditions is to have clear visibility. Remove all of the snow and ice from your vehicle before getting inside. Work from the top down and remember to include your roof, windshield, hood, trunk, taillight and mirrors. Once you have prepared your vehicle and you're ready to hit the road, keep these tips in mind:
1. Decrease your speed. Match your driving speed to the driving conditions.
2. Always try to plan ahead and anticipate potentially dangerous driving situations, streets or areas.
3. Brake effectively. Sometimes, it's best to just take your foot off of the accelerator and let the vehicle slow down naturally. Also, brake on the straight section of the road before entering a curve, rather than braking while in the curve.
4. Be alert to other vehicles. Maintain a distance that will allow you to react to the driver in front of you.
5. If your windshield wipers are on, then your lights should be too. When driving in snow or poor visibility, utilize your lights and high beams accordingly.
6. Maintaining a comfortable cabin temperature can keep the windows free of frost, ice and snow.
7. Drive as smoothly as possible and avoid sudden braking and steering inputs.
8. Signal early when stopping or turning in order to give the vehicles behind you and oncoming vehicles extra time to react.
9. Do not drive overconfidently simply because your vehicle is equipped with anti-lock brakes, four-wheel drive, traction control or other safety devices.
10. If your car is equipped with anti-lock brakes, be familiar with their operation. A steady pressure on the brake pedal with result in a pulsing sensation. This is normal and the brakes are operating as they are designed to operate.
If you do find yourself in a dangerous black ice driving situation, remember to remain calm and apply the appropriate maneuvers. To get out of a skid, you usually don't want to hit the brakes, accelerate, or turn suddenly (if possible). Instead, you may want to try to release the brakes and turn your wheels into the direction of the slide. If you happen to steer too far and end up sliding in the other direction, try slowly turning back to the opposite direction.