Digital Thermatic™ Fan Switch Kit by Davies Craig®. 12V and 24V applications. Kit can be used with Thermatic Fans, EWP's and competitors Fans. It senses air temperature as it passes through the radiator with the sensor placed in the radiator fin section or the sensor can now also be placed directly into the coolant system in combination with a Temperature Sensor Adapter Kit (Part 0409). It can be used for 12 or 24 volt applications and has an adjustable temperature range of 40ºC to 110ºC (104ºF to 230ºF) which can show Centigrade or Fahrenheit. Temp is set by pressing the set button. It can run 1 or 2 fans. The second fan (if applicable) will start 10 seconds after Fan #1 runs. It operated thermally & also when the air conditioning is in operation. Keep your EWP/Fan in control with this innovative product by Davies Craig. Specially designed for effective engine cooling system management, it will thermatically control the cooling fan in unison with your EWP, maintaining the target engine operating temperature. With this Davies Craig accessory used in conjunction with the EWP/Fan, you’ll get maximum power and efficiency you crave for.
- The unit is Not WaterProof
- Kit sold in 12V configuration, for 24V application, you will need to change the two relays with 2 x 24 volt units which are not supplied in the kit
- Ensure you have a current 0409 which inlcudes a 5 & 6 mm Olive. A Star Burst on the packaging will you identify this along with two olives in the packaging.
- If using this switch for use with EWP's, it will not vary the speed of the pump in response to engine temperature but rather turn the pump on and off at your set temperature. For EWP control, Davies Craig would reco mmend part number 8001 which can manage both the EWP and your Thermatic Fans..
|Max voltage: 12 to 27V (For 24V, relays need to be changed, not supplied in kit)|
|Max current: 40A per Fan|
|Relay setup: Dual relay|
|Speed: Single speed, 10 second delay to start up the second fan|
|Applications: Suitable for single and dual fan applications|
|Screen Display: LED digital temp display, actual temp + set temp|
|Temp Display: Centigrade or Fahrenheit|
|Temp settings: 40°c to 110°c (104°F to 230°F)|
|Temp setting: Push Button|
|Circuit type: Pre-programmed micro controller|
|Output wires: Batt + Batt - IGN, AC Clutch, Fan #1, Fan #2 Thermistor Probe|
|Dimensions: 95 x 65 x 56 mm|
- Innovative design for unbeatable performance
- Meticulously designed to deliver solid performance
- Crafted utilizing up-to-date equipment
- 1 Digital Fan Controller
- 1 Mount Kit
- 1 Scotch Lock
- 1 Ring Terminal (Yellow)
- 2 Self Tap Screw
- 1 Connector (Yellow)
Simply set the temperature by pressing the set button. It can run 1 or two fans. The second fan (if applicable) will start 10 seconds after Fan #1 runs. The fans will operate until the air temperature is reduced by 5 degrees (C) from the set temperature.
AIR TEMPRETURE APPLICATION:
It senses air temperature as it passes through the radiator and has an adjustable temperature range of 40ºC to 110ºC (104ºF to 230ºF).
The Temperature Sensor is placed in the radiator fin section as close to the hot coolant inlet as possible, no need to cut hoses or can be placed directly into the coolant system.
WATER / COOLANT APPLICATION:
The 0444 sensor can now also be placed directly into the coolant system. To help you identify if your 0444 is capable of water / coolant applications, the sensor cable will be 1meter in length whilst the older 0444 units only have a 50cm cable.
You will also need to use a Temperature Sensor Adapter Kit (Part 0409) to assist with this type of fitment.
If you’re a Hollywood super star there's no such thing as being too hot, but if it’s your vehicle’s heart under the hood that’s too hot, then that's not such a good thing at all. Bring those punishing high temperatures down with over-the-top performance engine parts from Davies Craig, leading the new Era in automotive performance engine cooling products. Using the latest in cooling technology and materials, these parts are aimed at efficiently cooling your engine bay to help prevent overheating and potential costly damage, which may occur. Whatever your automotive cooling needs, Davies Craig has the cool solution for the job.
If you’re looking to maximize your horsepower and ensure that your engine performs at the right temperature, Davies Craig has got you covered with a range of Fan & EWP controllers and switches designed to efficiently manage either an Electric Water Pump (EWP), Electric Booster Pump (EBP), Electric/Thermatic Fan or both. Fan/EWP controllers and switches by Davies Craig will come in handy to ensure your cooling system stays at the proper temperature. They’re a must-have for optimal control of your EWP/EBP by varying the speed of your pump in response to coolant temperature and manage control of your electric Thermatic/Electric Fan.
State-of-the-art Fan and EWP controllers and switches will help keep your pump running at the right flow rate, maintaining the optimal engine temperature you ‘set’, and will turn on the engine’s fan when cooling is needed over a wide range of temperatures. The higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. Davies Craig engine management components has undergone extensive research, development, vehicle and test centre scrutiny to ensure that you get the highest quality and performance you can count on. Built with exceptional functionality in mind, they’re constructed with finest-grade materials to give you many years of trouble-free operation. When used in a combination with your EWP, they allow your engine to warm up quicker, unlock more power and improve engine life and reliability.
Established over four decades ago, Davies Craig® was formed to manufacture high-performance electric fans to fulfill the needs of automotive enthusiasts looking for a more efficient method to cool down their vehicles, and has since developed a comprehensive range of products, covering most makes of vehicles. Davies Craig's innovation, electric cooling, has now become a standard feature on most today's vehicles. Whatever your automotive cooling needs, the company has you covered with best-in-class fans, electric water pumps, viscous clutches, oil coolers, etc. Made utilizing the latest balancing machines, flow rigs and pressure testing equipment, they ensure the highest quality and performance to exceed your expectations.