The Chevy Camaro made its first public appearance in 1966. It was a sleek rear-wheel drive coupe created to take on the Ford Mustang. It has gone through various facelifts and upgrades while competing with Ford’s offerings and the models launched by Chrysler’s subbrands. A mighty car with a head-turning exterior design, the Camaro has always been popular among Americans. The fifth-generation Camaro unveiled in 2009 was effectively promoted in the Transformers franchise. In 2016, Chevrolet launched the sixth generation of this remarkable car, the one competing now with the evolved Ford Mustang and Dodge Challenger.

Right here, under your fingertips, there is a complete selection of Chevy Camaro performance headers. Since it’s so important for us to be confident about the high quality of each and every one of our offerings, we’ve forged close connections with aFe, Big End Performance, Borla, Cometic Gasket, and other similar manufacturers, which are respected and well-known companies. Our products are at your disposal 24 hours a day, so you’re welcome to browse through our inventory, select the parts that will be up to your price and performance requirements, and place an order!

1 - 15 of 3486 results
show:
sort by:
    • (1 review)
      # sp231
      Stainless Steel Header by Borla®. Not compatible with power steering. 304 stainless steel for long life. Connects to the factory mid-pipe. Mandrel-bent for smooth curves. Million Mile warranty.
      Austenitic 304 stainless steel tubing means a lifetime product that won't ever corrode or deteriorateAll bends are mandrel-bent for smooth transitions and maximum flow characteristics
      $659.99 - $1,319.99
    • (0 reviews)
      # sp7278
      Ceramic Coated Performance Header by MagnaFlow®. These headers are a cost effective an easy way to boost your vehicle's horsepower and torque in almost nothing flat. They are made of mandrel bent stainless steel with a ceramic...
      Easy and a cost effective solution to add horsepower and torque to your engineEnsures proper operation of engine cylinders fighting the back pressure
      $770.45 - $903.95
    • (0 reviews)
      # sp16175
      Block Hugger Street Rod Headers by Hedman Hedders®. Hedman’s Standard Block Hugger design is ideal for factory manifold replacement or engine swap projects that do not have a hedder designed specifically for the application.
      Low profile designBuilt of High Quality Materials
      $174.00 - $705.92
    • (0 reviews)
      # sp18943
      Short Tube Exhaust Header by PaceSetter®. Mild Steel. Finish: Black Painted. Manufactured using mandrel-bent, 16-gauge mild steel tubing and port-matched, CNC-machined, 3/8"-thick head flanges. They are designed for the best...
      Machined flanges and 16-gauge primaries, just like race long tubesPollution control hook ups
      $165.82 - $489.81
    • (0 reviews)
      # sp13763
      BlackHeart 304 SS Long Tube Headers by Hooker®. Hooker continues to push the boundaries of performance with the new Blackheart line of performance exhaust headers for popular late model vehicles.
      This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing VehiclesConstructed of lightweight mandrel bent 304 stainless steel primary tubes wtih a large 3" diameter outlet tube maximizing strength and durability
      $429.95 - $1,599.95
    • (0 reviews)
      # sp18946
      Long Tube Exhaust Header by PaceSetter®. Mild Steel. Quality manufactured and affordably priced, PaceSetter Long Tube Headers will wake up your late model muscle car without damaging your wallet. Manufactured using mandrel-bent,...
      3/8” thick CNC-machined, port matched steel flanges1-7/8” or 1-3/4” 16-gauge mild steel, mandrel-bent primaries
      $165.82 - $458.88
    • (1 review)
      # sp13764
      Balckheart Shorty Headers by Hooker®. Hooker continues to push the boundaries of performance with the new Blackheart line of performance exhaust headers for popular late model vehicles.
      Merged collectors for maximum flow and increased exhaust velocity3/8” thick precision water jet cut flanges for less warping, maximum sealing surface, and better seal
      $399.95 - $749.95
    • (1 review)
      # sp847
      Scavenger Series 6-2-1 Style Headers by Flowmaster®. Replace your restrictive factory exhaust manifolds with these stainless steel headers and let your engine breath! These headers are easy to install because they’re designed to...
      Dyno tuned for maximum performanceImproves exhaust flow
      $394.78 - $799.00
    • (1 review)
      # sp3667
      XR-1™ Stainless Steel Long Tube Header by Borla®. Extract the horsepower hidden in your engine with these long tube headers. These headers are designed to be used with other performance upgrades and without the catalytic...
      Race winning designLong, large diameter tubes for increased flow and optimum exhaust scavenging
      $945.99 - $1,865.99
    • (7 reviews)
      # sp795
      Performance Headers by Gibson®. Let your engine breathe and gain power and performance with Gibson Performance Headers. These headers will flow much more exhaust than your restrictive factory exhaust manifolds. The increased...
      Dyno tuned for maximum performanceImproves exhaust flow
      $345.56 - $643.82
    • (0 reviews)
      # sp2378
      Premium™ Header Gasket Set by BBK Performance®. These BBK premium quality Header Gasket Sets are designed to give you a quality long lasting seal. Will work on most stock or aftermarket applications.
      Provides a long lasting, leak-proof sealFlexible graphite will conform to surface irregularities and won't stick to headers or cylinder head
      $14.99 - $39.99
    • (0 reviews)
      # sp2370
      Full Length Stainless Headers by BBK Performance®. BBK R&D department developed these Long Tube Exhaust headers with one thing in mind – getting even more horsepower and torque out of your car! This all-new rugged BBK long tube...
      $439.99 - $1,149.99
    • (4 reviews)
      # sp20663
      Tuned Length Shorty Headers by BBK®. Primary Tubing Diameter: 1.625". Gain 15-20 dyno-proven horsepower at the rear wheels just by bolting on a set of BBK long tube, full length headers. These premium headers are CAD designed with...
      Dyno testing results show a typical increase of 15-20 horsepower at the rear wheelsDeveloped using CAD (Computer Aided Design) software
      $199.99 - $649.99
    • (0 reviews)
      # sp17155
      PFADT Series Tri-Y Headers by aFe®. aFe Power’s introduces the PFADT Series headers. These headers are constructed of near equal length mandrel-bent 16-gauge, 304 stainless steel tubing with thick flanges to ensure a leak free...
      Constructed of 16-gauge 304 Stainless Steel TubingRetains Factory O2 Sensors
      $795.00 - $2,195.00
    • (0 reviews)
      # sp17157
      Twisted Steel Long Tube Headers by aFe®. The new Twisted Steel performance header from aFe Power is redefining the header industry with the new pulse control technology. aFe engineers have designed this header using optimum tube...
      16-gauge 304 stainless steel mandrel-bent tubing for unrestricted flow4-to-1 formed collectors decrease turbulence and increases exhaust velocity
      $995.00 - $1,995.00




    Chevy Camaro Performance Headers Reviews

    Average rating:  4.5  4.5 - 39 reviews
    5 of 5
    CanAmMex® 00747-212 - Thunderbolt™ Hi-Polished Single Rolled Angled Oval Tip
    These appear to be of very good quality, good welds.
    JPosted by John (Enfield, CT) / February 24, 2016
    Was this review helpful for you? Yes
    View More
    Related Chevy Camaro Pages
    Chevy Camaro Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.