2005-2014 Ford Mustang Harness Bar Installation

Recommended Tools

• Adjustable Wrench
• Socket Wrench
• #50 Torx Bit
• 17 mm Socket

1. Remove the original plastic cover and main bolt located at the shoulder assembly on driver and passenger side. Take off the spacer and washer from the original bolt and set aside the spacer for future use.

2. Take the original bolt and spacer and assemble them with the harness bar upper support plates as shown.

3. Remove the original bolt from the lower seat belt mounting point on both sides. Take off the spacer and washer from the original bolt and set aside the spacer for future use.

4. Take the original bolt and spacer and assemble them with the harness bar lower support plate as shown.

5. Use the smaller additional hole on the lower support plate to mount the provided support bars.