DIY Kryptonite Differential Cover Kit (BTF11097) by Blue Torch Fabworks®. The Front Kryptonite Diff Cover" was designed with pure function in mind. Like all of the Kryptonite Series Diff Covers the BTF Toyota 8" Front Kryptonite Diff Cover is fabricated from 1/4" high-strength steel plate. The cover welds on over the stock housing. You are not required to remove any portion of the stock diff. This is more than just a cover. It adds strength to the rear of the axle on either side of the "hump" where it is the weakest. It welds to the housing with 1 1/2" long stitches to prevent warpage and allow for dirt and mud to dra" The fill plug recess is fabricated with 1 3/4" round tube to strengthen the cover in the area of the plug and also to prevent the fill plug from dropping into the cover. This product ships in a kit form. It will arrive in 4 pieces that must be fit together and welded inside and out.
- This Is An Unassembled Cover And Requires Assembly And Welding
- Fabricated From 1/4 high-Strength steel plate
- The Cover welds on Over The sTock Housing
- you are not required To remove any portion of The sTock diff
- All diff Covers are shipped unpainted
Blue Torch Fabworks, Inc. was established in 2001. Back then, there weren't many readily available parts for the hardcore wheeler to build with. BTF filled this void by creating parts that made building for the at-home garage builders a little more easier. Blue Torch Fab is now the industry leader in DIY parts for your custom fabrication project. Blue Torch Fabworks specialize in manufacturing parts for average Joe at home do-it-yourselfer with moderate fab skills. Blue Torch Fabworks design our parts to be assembled easily in the customer’s own garage with basic fabrication tools. Our main focus is to provide affordable parts for the recreational trail wheeler while still maintaining the quality and strength that the hardcore crawler/racer would need. BTF is located in downtown Birmingham, AL in a 33,000 sq. ft shop, that includes a full fab shop, machining tools, offices, and a showroom. Blue Torch Fabworks have 10 employees working to provide our customers with quality parts and service. In addition to providing parts and accessories for Jeeps, trucks, and custom chassis, Blue Torch Fabworks have also built many custom turn-key vehicles. From trail Jeeps on 1 ton axles to full King of the Hammer style race vehicles, Blue Torch Fabworks can handle it all. Our experienced staff takes great pride in everything that leaves our doors. If you're looking for a small metal tab to mount body panels on your tube chassis, pre-fabbed brackets to build a four-link suspension under your Jeep, or even custom machined steel and aluminum parts, Blue Torch Fab has knowledge and equipment to make it happen.