Universal Bed Mat for Drop-In Liner by BedRug®. This BedRug Mat is designed expressly for trucks that are already equipped with a drop-in plastic liner, featuring a 1/2" thick foam backing that provides a smooth work surface without needing to drill holes into your truck bed. CA Prop 65 WARNING - This product contains chemicals known to the State of California to cause cancer, and/or birth defects or other reproductive harm.
Notes: California Proposition 65 Warning.
- Cut-to-fit design that measures 66"W x 98"L
- Resists weather, gasoline, battery acid and bleach
- Designed to pair with drop-in bed liners
- Cleans up easily with a hose, pressure washer or vacuum
- Constructed from heavy-duty polypropylene with a non-skid texture
- Works with a wide range of truck beds
- Made in the USA
Much like the BedRug, the BedRug Mat is made to fit your specific make and model, and will give you the look and feel of carpet in an ultra-tough 100% polypropylene (essentially plastic) product. It will protect your truck while standing up to whatever you can throw at it: from mulch to bleach. With its cushioned foam non-skid surface, it will keep everything in place while protecting your cargo and your knees. The BedRug Mat material is fade and UV resistant. Made of foam similar to that used in life jackets, it doesn't absorb water and will not mold or mildew. Just clean it with a hose, power washer or vacuum and your BedRug Mat is good as new.
A vacuum, broom, brush or compressed air can be used to remove dirt, grime, sand, mulch etc. Because water will not harm the BedRug, pressure washing is also an effective way to clean a soiled BedRug. Although most acids will not harm the BedRug, baking soda should be applied immediately to neutralize the acid to ensure the safety of the paint on the vehicle. To clean tougher jobs such as gasoline, oil, chemicals, acid spills or leaks from your BedRug use detergent soap with degreaser and water, then rinse thoroughly. This detergent soap is used in most car wash locations with pressure washing equipment. The BedRug polypropylene closed-cell foam will not absorb water and the polypropylene fiber dries in minutes.
BedRug® is well known throughout the aftermarket, a name synonymous with high quality and innovation. Located in Old Hickory, Tennessee, BedRug got its start as a manufacturer of TPO foam (Thermoplastic PolyOlefin) composites. TPO foams offer a broad range of performance attributes, ranging from softness and flexibility to thermal stability - it is a closed cell construction, which will not absorb moisture, and is similar to the foam used in life jackets. It can be fabricated into a variety of parts that are suitable for exterior applications. Most importantly, it can be laminated to other substrates - and in BedRug's case, those additional materials include 100% polypropylene plastic non-woven "carpet" and the TPO composite that creates BedTred. BedRug is environmentally safe - BedRug products are manufactured from a recyclable TPO/polypropylene composite. All unusable polypropylene materials are recycled into pellets and used in a wide variety of consumer goods. In addition, BedRug products do not contain any prohibited or declarable substances on the Global Automotive Declarable Substance List (GADSL). BedRug was purchased by THI Corp. in 2009.