Vehicle Fitment
| Make | Model | Year |
|---|---|---|
| Ford | Mustang | 2005-2010 |
Product Details
CNC Series™ Dual Exhaust Conversion X-Pipe by BBK®. Main Piping Diameter: 2.5". Give your V6 Mustang a power boost and GT looks and sound with this Dual Exhaust Conversion Kit. It includes a high-flow X-Pipe, high-flow catalytic converters, and a driver’s side tailpipe. Use your existing passenger’s side pipe and connect to the axle-back GT muffler kit of your choice and you’ll have more power with the high-performance looks and rumble of dual exhaust. The kit even includes a template to cut out the driver’s side exhaust opening.
Notes
- This product is NOT legal for installation on vehicles required to meet CARB standards and/or registered in California and other states following CARB standards, including NY and ME.
Specifications
| Series: CNC Series™ |
| Main Piping Diameter: 2.5" |
| Converter Configuration: Universal Fit |
Features
- Converts Mustang V6 single exhaust to dual exhaust
- Direct bolt-on installation; no pipe cutting or welding required
- X-pipe allows exhaust from both banks to exit using both sides of the exhaust system, for the least restriction and greatest exhaust flow
- Large diameter tubes are CNC mandrel bent to maintain consistent flow throughout the length of the exhaust
- Include factory style flanges for a perfect connection to factory exhaust manifolds or shorty headers
- Includes high-flow catalytic converters and O2 sensor bungs
- Includes driver’s side tailpipe
- Requires separate purchase of aftermarket axle-back Mustang GT exhaust system
- Includes template to cut out driver’s side exhaust opening
- Comes with detailed installation instructions
- Limited 1-year warranty
- Proudly made in the USA
Reducing restriction to let an engine “breathe” is one of the oldest and most well-known modifications and personified by “dual exhaust”. Letting both banks expel exhaust through their own separate paths was long thought to be the best for performance and definitely superior to a “single” exhaust system, like the one that comes stock on a V6 Mustang, where both banks feed into a single pipe. Today we know that even dual exhaust can be improved upon with an X-Pipe and that’s what you get with this Dual Exhaust Conversion Kit from BBK.
On a V-type engine close firing cylinders are competing for space in the exhaust pipe, which creates backpressure and reduces power. When close firing cylinders are exhausting on one bank, there is nothing happening in the other bank, so merging both sides with an X-Pipe effectively enlarges the exhaust system, allowing these exhaust pulses to exit through both sides of the system. The exhaust pressure on both banks is equalized and power is increased at all engine speeds.
This dual exhaust conversion with X-pipe is a bolt-on installation, with no pipe cutting or welding required. The X-Pipe with high-flow catalytic converters replaces the stock Y-pipe and factory converters. Connect the factory passenger’s side tailpipe and install the new driver’s side tailpipe, then connect both pipes to an aftermarket axle-back exhaust system for a Mustang GT. A template is included to cut out the bumper for the other exhaust tip, or a GT bumper cover can be used. With this kit you’ll get increased performance from reduced exhaust restriction, as well as great dual exhaust looks and sound.
The BBK Dual Exhaust Conversion Kit comes with detailed instructions to guide you through the installation. Every kit is backed by a 1-year limited warranty against defects in materials or workmanship, as long as the product was installed according to BBK guidelines and not used for racing.
BBK Performance® is the No. 1 manufacturer of EFI performance parts and accessories. For over 20 years the company has concentrated its resources on the development and manufacture of performance parts and accessories for late model electronically fuel injected vehicles. These parts include large bore, high-flow mass air meters and throttle bodies, intake manifolds, high-flow fuel rails and high-volume fuel pumps, and cold air intake kits. The company also manufactures an extensive line of high-tech headers and exhaust pipes, and state-of-the-art suspension and steering components. Along with their commitment to EFI, the company is also dedicated to designing and manufacturing the highest quality parts and accessories right here in the USA. To that end, the company operates 2 large design and manufacturing facilities in Temecula, California as well as a large distribution center located in Daytona Beach, Florida.
Related Links
Reviews
(0)Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Questions and Answers
(0)If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!