Tracker Tie Rod End by Baer®. Baer Tracker Tie Rod End pieces are designed to restore steering and ride stability that may be lost during ride height changes when factory caster and camber settings are altered. Corrosion-free metals are used to ensure strength and joint movement are not compromised over time. No drilling of spindles is required for installation. Available in sets for front and rear.
- End joints allow more articulation between tie rods and steering arms
- Reduce side-to-side jumpiness of front wheels that can result after suspension ride height is altered
- Adjustable range of 3/4th of an inch allows fine-tuning adjustment to correct bump steer conditions
- Restores better steering stability lost by caster/camber alignment changes
- Machined and heat treated Chrome Moly pin. Correct pin taper per application
- Does not require drilling of spindles for installation
- High grade T6 aluminum construction with black anodized finish on outer sleeves provides high strength and freedom from corrosion
- Heim joints are lined with Teflon for smooth, long-lasting operation
- Sold in sets of two for front and rear applications
- Proudly manufactured in the United States
Changing a vehicle's ride height causes changes in suspension caster angles which can dramatically affect steering. Instead of steering remaining stable and returning to center easily, simple bumps in the road may cause your suspension to articulate differently than it was designed to. Front wheels may hop dramatically to the left or to the right as a result, and ride quality can be compromised in both the front and rear. Baer's Tracker Tie Rod End joints compensate for ride height changes to allow more freedom of movement between your vehicle's tie rods and steering arms. Because of the greater flexibility and range of articulation the end joints add, optimal steering stability and control is restored. T-6 aluminum construction ensures high strength, and Teflon-coated sockets back the long-lasting durability of these end joints with smooth, noise-free operation.
Founded in 1986 in Phoenix, Arizona, Baer® began with the goal of producing only superior brake components and kits for the driver who appreciates high levels of performance on the street and on the track. Company leaders have always been relentless in their pursuit of making better products through innovation and quality control measures that result in defect-free manufacturing. Whether you're looking to upgrade factory brakes with OEM size components, larger calipers and rotors, or convert a classic with drum brakes to discs, Baer offers a wide selection of brake packages for every driving purpose and budget.