PowerAid™ Throttle Body Spacer (200-512-1) by AIRAID®. The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it’s unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power. CA Prop 65 WARNING - This product contains chemicals known to the State of California to cause cancer, and/or birth defects or other reproductive harm.
- California Proposition 65 Warning
- This is a CARB compliant part, legal for use on vehicles built to meet CARB standards and/or registered in California and other states which follow CARB standards (CARB EO: D-609-3).
|Spacer Thickness: 1.000"|
|Spacer Finish: Red anodized|
|Spacer Material: Aluminum|
|Quantity: Sold individually.|
- Enhances fuel atomization, which improves combustion and engine efficiency
- Increases low end torque and fuel economy
- Easy to install, takes less than 1 hour with simple hand tools
- CAD designed and dyno tested for each specific application
- Manufactured from aircraft-grade 6061 T-6 aluminum
- Backed by AIRAID's "No Hassle" warranty
- Proudly made in the USA
- Mounting Hardware
There are many companies that make products to improve airflow to your engine. AIRAID is one of the few that's thought of how to improve that airflow once it gets there. The result of their research and testing is the PowerAid™ Throttle Body Spacer. The PowerAid™ Spacer is about 1-in. thick and installs between the throttle body and intake manifold. It features AIRAID's unique and patented Helix Bore, which creates a spinning action as the incoming air passes through the throttle body. The helical effect causes the air molecules to organize and maintain high velocity, all the way into the combustion chamber. Combustion is improved and engine efficiency increased. The results you experience are tremendous torque gains from 800-2500 rpm, along with gains in fuel economy.
Each PowerAid™ spacer is computer designed and dyno tested for the specific application. It's manufactured from high quality, aircraft-grade 6061 T-6 aluminum. Everything required for installation comes with your spacer, including gaskets, hardware, the necessary brackets and detailed instructions. And it can be installed in less than an hour with simple hand tools.
PowerAid™ spacers are available for vehicles with electronic throttle bodies and vehicles with throttle cables. They're also available with PowerPorts™. PowerPorts™ are specially located ports in the spacer that are drilled and tapped for instrumentation sensors or power enhancements like Nitrous Oxide.
AIRAID® was founded in 1997 when they began developing and manufacturing air intake systems for light trucks and SUVs, utilizing the cotton-gauze filter technology that was available at the time. These systems increased airflow and performance while being easy to install, and sold so well that the company soon realized that another source of filters was necessary. They believed they could produce a better quality filter using new technology and state-of-the-art materials, and so in 2002 the AIRAID Filter Company was formed. Today AIRAID is the recognized leader in air management technology. Extensive research and development has allowed AIRAID to come to market first with high quality products that improve drivability and performance.