Gen IV Dominator Series™ Air Bag by Air Lift®. Quantity: 1 per Pack. Dominator series air spring bags are available individually and can be used with Air Lift Performance kits and Crafter kits. Rated to hold 600 psi, the bags are available in a 2500 series with a 7.7-inch height range that can lift 2,096 pounds, and in 2600 series with a 9.7-inch height range that can lift 3,055 pounds. Both offer either a standard single port configuration for normal use, and dual port configuration when faster inflation and “hopping” are desired. CA Prop 65 WARNING - This product contains chemicals known to the State of California to cause cancer, and/or birth defects or other reproductive harm.
- California Proposition 65 Warning
- Never exceed manufacturer’s recommended Gross Vehicle Weight Rating
|Type: With Single 1/2" Port|
- One D2500 Dominator air spring
- Designed to offer both an aggressively low stance and a higher ride height
- Can be used with Air Lift Crafter kits and Performance kits
- Set of D2500 springs features a load rating of 294 – 2,096 pounds
- D2500 springs compress to a minimum height of 2.8 inches and extend to a maximum height of 10.5 inches, providing a 7.7-inch usable stroke range
- 1-year manufacturer warranty
- Manufactured in the United States
The Dominator Air Spring is one of the strongest and most versatile air springs Air Lift builds – designed for performance AND load lifting applications. It will compress to an extremely reduced height when a low-riding stance is desired, then it will rise almost eight inches higher to give a lifted-truck look. And if there’s a heavy load in the bed to haul, it’s no problem. These air springs can be inflated to a maximum of 600 psi – lifting and holding weight easily to maintain a level vehicle stance at whatever ride height is selected.
With low-to-the ground looks and handling advantages at lower spring inflation and height clearance, comfort, and level hauling ability at higher spring inflation, these air springs truly provide the best of both worlds without the disadvantages. Because unlike typical low-height coil springs, vehicles can be raised back to OEM height when normal ride quality is beneficial – eliminating the bushing and control arm wear that comes from a rough ride while preventing oil pan damage over speed bumps. Air Lift proudly produces all components in the United States, and backs them with a 1-year warranty against manufacturing defects.
Founded in 1949 in Lansing, Michigan, Air Lift® pioneered the first rubber air bladder that fit inside coil springs to give pickups and other transport vehicles greater load-leveling and ride-stabilizing abilities. These found wide acceptance on commercial vehicles and were soon adopted throughout NASCAR and other professional stock car racing series after assisting many drivers to achieve victorious finishes. Over the decades, Air Lift has continued to pioneer innovative developments with air spring helpers and stand-alone air springs for mobile homes, ambulances, and heavy trucks. During the 1990s, the company was on the cutting edge – developing high-performance air springs and complete air suspension systems that allowed extreme lowering, stunts, and higher levels of handling during aggressive driving. Today, Air Lift is ISO 9001:2008 certified for best business practices, manufacturing, and customer satisfaction and their range of high-quality products is widely respected throughout the industry.