AEM Intakes® - Aluminum Gunmetal Gray Cold Air Intake System with Red Filter

0 reviews|Item # 635408311
$349.99
In Stock - Ships in 24 to 48 hrs
Guaranteed Fit
2017 Hyundai Elantra
  • 1.6L
Authorized Dealer

Product Details

Hyundai Elantra 1.6L 2017, Aluminum Gunmetal Gray Cold Air Intake System by AEM Intakes®. To deliver cooler air to the engine, this air intake system places the air filter outside the engine compartment. Cooler air is denser than warm air and so contains more oxygen, which results in better combustion and more power.

Specifications

HP Gain: Up to 11 hp
TQ Gain: Up to 11 lbs./ft.
Filter Shape: Round
Filter Color: Red
Tube Finish: Gunmetal Gray
System Type: Cold Air Intakes
Material: Aluminum
Air Filter Material: Non-woven Synthetic
Replacement Filter: 21-2157DK

Includes

  • Air Intake
  • 3 Stainless Steel Regular Clamps

Features

  • Delivers more oxygen to the combustion chamber by drawing in cooler air
  • Custom designed and engineered to deliver maximum power for each specific vehicle
  • Every system includes the innovative, oil-free, high-flow AEM Intakes Dryflow™ air filter
  • Dyno-tuned air intake pipe constructed of mandrel-bent 6061 aluminum for smooth airflow
  • Air filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)
  • Comes complete with all necessary mounting hardware and comprehensive installation instructions
  • Backed by the AEM Intakes limited lifetime warranty
  • Proudly manufactured in the USA

It’s a well known fact that cooler air is denser and contains more oxygen. Cooler engine air inlet temperatures result in more power. But your stock, restrictive engine air intake system delivers hot air from the engine compartment! The answer to this dilemma is to install an AEM Intakes Cold Air Intake system. AEM Intakes starts by positioning its high-flow Dryflow air filter outside the engine compartment, to draw in the coolest air possible. AEM Intakes performs extensive temperature testing for each application to determine the best filter location. But that’s not the end of the story. The Dryflow air filter is connected to the engine air intake by an aluminum tube tuned in length and diameter to match the engine’s intake resonance. The combination of cold air and tuned free-flowing intake tube results in increased horsepower and torque. And there’s no need to worry about problems with the engine control system when installing an AEM Intakes Cold Air Intake. During development, AEM Intakes monitors the engine control system fuel correction factors and sensors on each vehicle to make sure you won’t get any CHECK ENGINE lights. Like all AEM Intakes air intake systems, the AEM Intakes Cold Air Intake system is made in the USA and backed by a lifetime warranty.

Every AEM Intakes air intake system comes with the innovative, oil-free, high-flow AEM Intakes Dryflow air filter. Each Dryflow filter is engineered to exceed the normal flow capacities of the engine it is required for when clean, while providing outstanding filtration and dust holding capacity. And the flow requirements are exceeded by a wide margin, which allows you plenty of leeway for engine breathing modifications, without needing to worry about having enough intake airflow. The AEM Intakes Dryflow filter is constructed of a unique non-woven polyester-based filter media supported by aluminum screen wire for rigid structural strength. This filter media doesn’t require oil to filter and trap dirt and contaminants, and actually sheds dirt under engine vibration, unlike cotton-gauze, which holds onto contaminants until you clean the filter. When it’s time to clean, simply tapping the filter a few times will remove most of the dirt from the filter pleats. Then spray the filter with AEM’s environmentally friendly, mild, all-purpose cleaner. Rinse the filter with clean water and allow to dry, or blow dry with compressed air. Best of all, the Dryflow filter requires no oiling, so there’s never a chance of over-oiling. The Dryflow filter is extremely durable and will withstand almost unlimited cleanings.

Founded in 1987 by John Concialdi (J.C.) and Bob Sullivan as a tuning performance shop, AEM Intakes® offers cutting-edge products that are rigorously tested in its laboratories, and the company confirms its results on the asphalt of the track. With its location in Compton, California, AEM was embedded in the tuner market from the very beginning. It was a matter of being in the right place, at the right time, with the right technical know-how. Innovation has always been the company’s core competency. It continues to lead the way with high-end products that push the envelope of what is possible. Whether you’re looking for an air filter, air intake system, or exhaust system, you’ll discover uncompromising quality paired with an eye-catching and show-worthy appearance.

Part Number:

Reviews

(0)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
AEM Intakes® - Aluminum Gunmetal Gray Cold Air Intake System with Red Filter
/0
CARiD FacebookCARiD TwitterCARiD YouTube ChannelCARiD PinterestCARiD Instagram
Inspiration Gallery
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.
CUSTOMER SERVICE
INFORMATION
CONTACTS