Duraflex® - LM-S Style Fiberglass Front and Rear Bumper Covers (Unpainted)

Name: Duraflex® - LM-S Style Fiberglass Front and Rear Bumper Covers (Unpainted)
Brand: Duraflex
SKU: 331087926
Rating: 3.5 (6 reviews)

6 reviews|Item # 331087926

Duraflex® - Basic Fiberglass Preparation Process Before Painting Information Duraflex® - FAQ Duraflex Authorized Dealer

$331.00 - $570.00Save: 32%

$224.40 - $387.60

In Stock - Ships in 24 to 48 hrs

Guaranteed Fit

2008 BMW 3-Series

Convertible / Coupe

Authorized Dealer

Have a Question? Ask a Specialist

800.505.3274Live Chat

Product Details

BMW 3-Series Convertible / Coupe 2008, LM-S Style Front and Rear Bumper Covers by Duraflex®. This bumper is stylish and aerodynamic. With Duraflex you get the best of both worlds, the light weight of fiberglass with the flexibility of plastic. Installation typically requires sanding, trimming, and filling prior to painting, thus, professional installation is recommended.

Specifications

Material: Fiberglass

Color: Unpainted

Quantity: 1 piece

Features

Designed to elevate your vehicle’s style above the rest
This ultra-stylish Duraflex bumper cover will replace your OEM bumper cover and transform the look of your vehicle.

Manufactured using proprietary polymer blend
Duraflex aerodynamics parts combine high-quality fiberglass, plastic, and flex resins for maximum flexibility and impact resistance. They come complete with a black protective coating.

Engineered for increased durability and lasting service life
Duraflex technology obtains a much higher durability rate than the average fiberglass product, resulting in years of reliable service.

Designed to offer modified aerodynamics to reduce drag
Thanks to its sleek, lightweight design, this Duraflex upgrade will come in handy to improve the overall aerodynamics of your vehicle, thus ensuring better performance and fuel economy.

Intended for off-road or show use only
Duraflex parts are not street-legal and are meant for off-road or showroom use only.

Duraflex® is recognized as one of the premier aerodynamic body part manufacturers in the world. Since their inception in 2000, the company has been dedicated to quality, value and customer service, consistently exceeding industry standards. Today, Extreme Dimensions offers over 7,000 products in carbon fiber, polyurethane and fiberglass. The company employs over 300 people at their 100,000 square feet U.S. headquarters and 200,000 square feet overseas manufacturing facility. Manufacturing and distributing the most innovative and largest selection of aerodynamic products in the industry, Extreme Dimensions’ focus is always to meet the needs of the automotive and truck markets.

Brand:

Duraflex

Part Number:

108641 108643

Warranty

All body kits and products sold by Duraflex are aftermarket products and are intended for off-road or show use only. The brand is not liable for any damages or injury as a result of the use of its products. Due to the material and processes used in production, products will not be a “direct bolt-on.” Duraflex products may need prepping, sanding, shaving, filling gaps, and/or other body work. Modifications may include removal of the reinforcement bars, bumpers, turn signals, and other safety equipment on the vehicle. Duraflex highly recommends that a professional “custom” shop with fiberglass body kit experience perform the installation. Auto shops experienced in OEM installations may not be experienced in aftermarket fiberglass installations. All products sold by Duraflex are for off-road and show purposes only. Due to strict regulations by the Department of Transportation, some of these products are not approved for street/highway use. The brand does not recommend, and in fact discourages, these parts to be used on public streets and highways.

LIMITED WARRANTY

Duraflex warrants its branded products to be free from manufacturing defects in workmanship and materials when used for their intended purposes. This warranty is non-transferable. Any part of a Duraflex product that is covered by this warranty and that is found in reasonable judgment to be defective in materials or workmanship will be replaced in full at the request of the customer. For example, Duraflex will not replace a complete body kit if a single component is found to be defective.ArrayThe following situations are not covered by warranty:ArrayAny Duraflex product that has been subject to misuse, neglect, accident; or that has been improperly installed.ArrayAny Duraflex product that has been modified or altered from its original manufactured state.

Hood and Trunk Fitment Guarantee

Duraflex stands behind the fitment of its products. Once your hood is installed, Duraflex will fully replace your hood if it does not fall within the following guidelines of the brand’s Fitment Guarantee.ArrayHood does not clear a stock engine.ArrayGaps between the hood and the fenders are more than 1/2″ wide on each side.ArrayHood levels more than 3/8″ higher or lower than the fenders.ArrayLatch is too long or too short compared to the stock latch, causing the hood not to latch after adjusting.ArrayDuraflex does not guarantee fitment on vehicles that have been involved in accidents and/or have had body damages or customization.ArrayHood pins are required.

Trunks

Gaps between the trunk and the rear fenders are more than 1/2″ wide on each side.ArrayTrunk levels more than 3/8″ higher or lower than the rear fenders.ArrayDuraflex does not guarantee fitment on vehicles that have been involved in accidents and/or had body damages or customization.Array

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(6)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Duraflex® - LM-S Style Fiberglass Front and Rear Bumper Covers (Unpainted)

1-6 of 6 Reviews

Sort by

4 of 5

Gt300 Front Bumper

It had minor blemishes but besides that everything looked good.

Posted by Alexander (Whittier, CA) / December 22, 20172005 Ford Focus

1 of 5

Bad Bumper

Duraflex® 109529 - 1M Style Fiberglass Front Bumper Cover (Unpainted)

As a body shop owner I have never seen such an ill fitting piece of junk. This bumper is straight up fiberglass do not let the fancy name fool you. This bumper will not fit the car it was made for. It needed 8-10 hours of repairs to even resemble the contour of the fenders and fit around the rebar and headlights it is supposed to match up too. It has so many defects in the fiberglass to be fixed as well. The molds it was made from are completely junk and worn out. I know as I have been in the fiberglass mold business before. I had to give it 1 star as there isn't anything less. This bumper is a waste of money.

Posted by Michael (Meriden, KS) / December 30, 20162007 BMW 3-Series

1 of 5

M3 Bumper

Duraflex® 109529 - 1M Style Fiberglass Front Bumper Cover (Unpainted)

Product was too small.

Posted by Nick (Woburn, MA) / December 10, 20162007 BMW 3-Series

5 of 5

Bodyside Molding with Chrome

Dawn® CF2-HIGH - 2.5" Wide Body Side Moldings with Chrome Insert (Painted)

Excellent product that adds class to any vehicle, and the price is right.

Posted by Jewetta (Fort Washington, MD) / October 19, 20122013 Toyota Highlander

5 of 5

Pre-Cut Painted Bodyside Molding With Chrome Line

Dawn® CF2-HIGH - 2.5" Wide Body Side Moldings with Chrome Insert (Painted)

Easy to install. It took me 30 minutes to install this product to my 2011 Highlander by myseft. Now my Truck appearance has improved alot. I hope you guys get the " Body Kit complete set" for 2011 highlander soon. I'll definitely get it.

Posted by Nhan le (Bethesda, MD) / May 13, 20112011 Toyota Highlander

5 of 5

Pre-Cut Painted Bodyside Molding With Chrome Line

Dawn® CF2-HIGH - 2.5" Wide Body Side Moldings with Chrome Insert (Painted)

The moldings look excellent on my Toyota Highlander and i love the new look that the moldings give off. Plus, the moldings can protect from dents from occurring in the door. Highly recommended.

Posted by Anthony (Waverly, PA) / March 13, 20112010 Toyota Highlander

Duraflex® - LM-S Style Fiberglass Front and Rear Bumper Covers (Unpainted)

Product Details

Specifications

Features

Related Links

Reviews