BMW 2-Series 2015, SportStop Slotted 1-Piece Brake Rotor by Centric®. Quantity: 1 per Pack. SportStop Rotors - the new name for one-piece performance upgrade rotors from Centric Parts. They are still the best aftermarket performance upgrade rotors around - only the name has changed.
|Driving Style: Daily Driver, Hauling & Towing, Performance / Racing|
|Rotor Design: Rotors Only|
|Rotor Construction: 1-Piece|
|Rotor Style: Slotted|
|Rotor Material: Cast Iron|
|Rotor Type: Vented|
|Lug Holes Quantity: 5|
|Lug Holes Size: 16.6mm (0.654")|
|Bolt Circle: 120mm (4.724")|
|Quantity: 1 per Pack|
- Engineered to look good behind the wheel and perform at the same time
- Power alloy metallurgy
- E-Coated hat finish for corrosion resistance
- High quality Centric Parts blank casting
- Slots reduce stopping distances in wet weather
- Slots help to increase pad bite and improve air circulation
- Slots create an escape route for debris, dust, gases, and water
- Slots clean and de-glaze pad surface for optimum pad coefficient of friction
- Vented type of rotors offers much faster heat dissipation
Every Centric Rotor is produced from a high quality Centric Parts blank casting and finished in a durable e-coating for corrosion resistance. Centric Rotors look great behind custom wheels, improve the initial bite of the brake pads, and help wipe away the debris that forms between the pad and the disc. Most Centric Rotors are finished with black e-coating on both sides of the hat, inside the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues. Power Alloy metallurgy is an exclusive feature of many Centric rotors. In specific vehicle applications, Centric works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength. Nearly all Centric 1-piece rotors have unique slot or hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.
Founded in Southern California in 2000, Centric® achieved recognition for its aftermarket and OE brake components and systems worldwide. Today the company is a leading manufacturer and supplier of brakes, big brake kits, high performance brakes, calipers, discs, rotors, pads, racing brakes, fluid, aftermarket brakes, armored vehicle brake upgrades, big brake kits (BBKs), and OEM brake systems for everyday cars, heavy-duty vehicles, and high performance cars. All Centric products are known under the StopTech, C-Tek, Centric, and PosiQuiet labels and backed by quality research and development.