Lumen® - Roof Mounted E-Mark 52.6" 96 LEDs 288W Combo Spot/Flood Beam LED Light Bar

Sometimes products fail to deliver what they promise, falling short of our expectations: one with eye-catching appearance may be accompanied by less than stellar performance, or the perfectly satisfactory operation of another may be cut short by premature failure. In contrast, the Lumen E-Mark Combo LED Light Bar with DRL was designed to exceed every aspect of your expectations. Its unique dual side emitting reflector design combined with powerful LED chips delivers the lighting performance you want to brightly illuminate dark country roads and rugged trails; performance that can’t be matched by ordinary LED light bars. Four LED lights mounted between the combo beam light rows function as bright Daytime Running Lights (DRLs) for increased driving safety. Meticulous engineering and rigorous testing enables the E-Mark to withstand shock from the roughest trails, and rain, snow and temperature extremes of the most severe weather, so it can dependably deliver that illumination. Lumen designers packaged all this performance and durability in a light bar with looks that will upgrade and perfectly complement the appearance of your vehicle.

The E-Mark Combo LED Light Bar with DRL’s exceptional performance comes from its one-of-a-kind dual side emitting reflector design coupled with powerful Osram 3W LEDs. Unlike conventional reflectors, the side emitting reflectors on the E-Mark light bar reflect more of the light produced by the LED chips. This more efficient use of the developed light, combined with the already highly efficient Osram LEDs, results in increased light output, more lumens, and consistently bright light through the entire beam pattern, without the scatter loss at the beam’s periphery that is common with the conventional reflectors found on ordinary LED light bars. You can depend on the E-Mark light bar to deliver this level of light production throughout its life, because the lumen output will only decrease by approximately 5% after 30,000 hours, far less than the light degradation typically suffered by conventional lights. Plus, it has an overall expected lifespan of 50,000 hours or more.

You can direct this powerful illumination exactly where you need it because the E-Mark LED light bar comes with spot beams in the center of the bar and flood beams at both ends. Spot Beams, also called Pencil Beams and Long-Range Beams, produce a concentrated beam of light that is ideal for seeing far into the distance. They’re perfect for racing and high-speed night use so you can be aware of what’s ahead on even the blackest night and plot your route accordingly. Flood beams are so called because they “flood” a wide area with light. The cone of light is wide and tall, making flood beams invaluable when you’re negotiating trails with obstacles both to the sides and above, such as low hanging tree limbs. Flood beams are also useful for lighting up construction, farm and other work sites. The DRLs can be illuminated independently of the combo beams via the same switch, making your truck or SUV more visible to other drivers.

But powerful lights are worthless if they fail when you need them, so Lumen also engineered the E-Mark LED light bar to be the most rugged they have ever constructed. The lights are enclosed in a corrosion resistant, aerospace-grade, die-cast aluminum housing fitted with an impact-resistant polycarbonate lens, and the entire housing is sealed with neoprene and waterproof silicone seals, rendering it completely impervious to moisture. After arduous testing the E-Mark earned an IP68 ingress protection rating, indicating complete protection against the intrusion of dust, and the capability to withstand continuous submersion in water to a depth greater than 1 meter without leaking. With that kind of performance you can be confident that the E-Mark LED light bar will perform reliably even in the harshest weather.

Although practical performance and durability were the foremost concerns, Lumen designers didn’t ignore the E-Mark’s aesthetic appeal, creating a sleek aerodynamic housing that make this light bar look great no matter where it’s mounted. But the aerodynamic shape isn’t just for looks, it also reduces irritating wind noise by approximately 30%, for quieter cruising. The Lumen E-Mark LED Light Bar with DRL comes with stainless steel mounting brackets and hardware that enable mounting from the bottom or the sides as well as vertical beam angle adjustment, so you can mount one just about anywhere including the roof, bumper, grille guards and bull bars. A temperature and aging resistant silicone lead with waterproof connector is wired to the light bar, and a complete wiring harness with illuminated rocker switch is included to facilitate easy installation. Lumen is so confident that you’ll be completely satisfied with the performance of this light bar that it’s backed by a 5-year warranty.