2011 Mazda RX-8 Trunks & Tailgates
-
StrongArm®Trunk Lid Lift SupportMazda RX-8 2011, Trunk Lid Lift Support by StrongArm®. Body Connection: Ball Socket (Nylon) 10 mm. Shaft Connection: Ball Socket (Nylon) 10 mm. Compressed Length: 6.43". Extended Length: 9.18". Travel Length: 2.75". Capacity: 58 Lbs....Engineered and Built to Meet or Exceed Original Equipment Quality Standards for Long Lasting PerformanceEasy To Install In Just Minutes$25.08 - WVE®Trunk Lid Release RelayMazda RX-8 2011, Trunk Lid Release Relay by WVE®. Replace your worn-out or faulty component with this quality replacement from WVE. This product is designed and tested to ensure the ultimate in durability and functionality. Made to meet...Excellent replacement for your worn-out factory partDesigned to keep your vehicle running reliably mile after mile$18.70
- Vicrez®Auto Body Plastic Repair Complete SetUniversal Auto Body Plastic Repair Complete Set by Vicrez®. The Vicrez Auto Body Plastic Repair Complete Set comes with needed to start working on your project right away. Vicrez packages its industrial/commercial products for purchase...Industry-standard Dispenser for Dual-Barrel cartridgesKit Includes an integrated dual-ratio plunger, usable for both 1:1 and 2:1 ratio cartridges$66.76 - $178.84Save: 10%$60.08 - $160.96
- Vicrez®Auto Body Plastic Repair KitUniversal Auto Body Plastic Repair Kit by Vicrez®. Auto Body Plastic Bumper Repair kit is auto body industry standard, two-component adhesive that cures in about 120 seconds. You can use this adhesive/ filler to repair any automotive...Made in USAHelps to elevate your vehicle above the masses$22.63 - $95.97Save: 10%$20.37 - $86.37
- Vicrez®Dual Cartridge Static Mixing NozzleUniversal Dual Cartridge Static Mixing Nozzle by Vicrez®. Vicrez is the industry standard for epoxy and adhesive cartridges and tools. And specifically, cartridges from Vicrez, Loctite, Araldite, Devcon, and 3M, and many others. This...Perfect for consistently applying Epoxy and Adhesives for any applicationIndustry-standard Dispenser for Dual-Barrel cartridges$20.26 - $41.72Save: 10%$18.23 - $37.55
- Vicrez®Dual Epoxy/Caulking Cartridge Dispensing GunUniversal Dual Epoxy/Caulking Cartridge Dispensing Gun by Vicrez®. Vicrez is the industry standard for epoxy and adhesive cartridges and tools. The Vicrez Dual Epoxy/ Caulking Cartridge Dispensing Gun works with all standard...Industry-standard Dispenser for Dual-Barrel cartridgesKit Includes an integrated dual-ratio plunger, usable for both 1:1 and 2:1 ratio cartridges$47.67 - $101.34Save: 10%$42.91 - $91.20
- Original (OEM)TrunksA trunk of your car or SUV or a bed of your pickup truck is designed to help you haul your tools, spare tire, bikes, groceries, building materials, and a lot of other cargo. A trunk is located at the rear of the vehicle and has a lid...
- Mazda OETrunk Lid - Lid & ComponentsMazda RX-8 2011, Trunk Lid - Lid & Components by Mazda OE. Maintain reliable performance of your Mazda and give it the looks it had when it rolled off the assembly line with Mazda OE parts and accessories. They are crafted of the same...Genuine Mazda OEM part designed to fit your specific Mazda model perfectlyCrafted using the most advanced materials and technology$1.94 - $937.36
- Mazda OERear Body & Floor - Interior TrimMazda RX-8 2011, Rear Body & Floor - Interior Trim by Mazda OE. Maintain reliable performance of your Mazda and give it the looks it had when it rolled off the assembly line with Mazda OE parts and accessories. They are crafted of the...Genuine Mazda OEM part designed to fit your specific Mazda model perfectlyCrafted using the most advanced materials and technology$23.06 - $236.82
- Mazda OETrunk Lid - Interior TrimMazda RX-8 2011, Trunk Lid - Interior Trim by Mazda OE. Maintain reliable performance of your Mazda and give it the looks it had when it rolled off the assembly line with Mazda OE parts and accessories. They are crafted of the same...Genuine Mazda OEM part designed to fit your specific Mazda model perfectlyCrafted using the most advanced materials and technology$16.83 - $131.59
- Tuff Support®Trunk Lid Lift SupportMazda RX-8 2011, Trunk Lid Lift Support by Tuff Support®. 1 Piece. The bodies of Tuff Support's are made of high quality seamless tubes, treated with phosphate before painting to increase protection against corrosion, and help the...Rod diameters are checked with lasers for imperfections and diameter fluctuations to meet OEM specsRods are heat treated and nitrated for hardening and resistance to corrosion$11.03
- RhinoPac®StrongArm™ Trunk Lid Lift SupportMazda RX-8 2011, StrongArm™ Trunk Lid Lift Support by RhinoPac®. 1 Piece. Body Connection: Ball Socket (Nylon) 10 mm. Shaft Connection: Ball Socket (Nylon) 10 mm. Compressed Length: 6.43". Extended Length: 9.18". Travel Length: 2.75"....Gas charged lift supportsHeavy gauge steel body$19.23
- Atlas Lift®Driver and Passenger Side Trunk Lid Lift Support SetMazda RX-8 2011, Driver and Passenger Side Trunk Lid Lift Support Set by Atlas Lift®. 1 Pair. Body Connection: Ball Socket (Nylon). Shaft Connection: Ball Socket (Nylon). Compressed Length: 6.3". Extended Length: 9.09". Travel Length:...Designed to deliver trouble-free, consistent performanceManufactured from high-strength materials to last$15.94
- Atlas Lift®Trunk Lid Lift SupportMazda RX-8 2011, Trunk Lid Lift Support by Atlas Lift®. Body Connection: Ball Socket (Nylon). Shaft Connection: Ball Socket (Nylon). Compressed Length: 6.3". Extended Length: 9.09". Travel Length: 2.8". Atlas offers lift supports for...Designed to deliver trouble-free, consistent performanceManufactured from high-strength materials to last$9.50
- Mazda OERear Body & Floor - Rear BodyMazda RX-8 2011, Rear Body & Floor - Rear Body by Mazda OE. Maintain reliable performance of your Mazda and give it the looks it had when it rolled off the assembly line with Mazda OE parts and accessories. They are crafted of the same...Genuine Mazda OEM part designed to fit your specific Mazda model perfectlyCrafted using the most advanced materials and technology$23.31 - $416.48
- VIS Racing®OE Style Carbon Fiber Trunk LidMazda RX-8 2011, OE Style Trunk Lid by VIS Racing®. If you’re striving for a serious high-performance look, this amazing part is just the ticket! The trunk lid is made of high-grade material from top to bottom, while remaining rather...Custom designed for your automobileLightweight construction$1,048.50
- APR Performance®Carbon Fiber Side PlateUniversal Side Plate by APR Performance®. Dress-up the engine bay with carbon fiber, molded to precise dimensions that only pre-preg. materials can achieve. These parts are exotic-looking, race-inspired, and are unmatched in quality.Pre-preg. Carbon fiber manufacturing process: engine covers are vacuum-bagged and cured in the autoclave at high temperatures, ensuring quality, durability, and extremely-high strengh-to-weight ratiosFade-resistant clear coat: engine covers are finished with UV-stable, production clear coat paint, then individually hand-polished to a brilliant shine$63.45 - $180.75
- APR Performance®Carbon Fiber SheetUniversal Sheet by APR Performance®. Dress-up the engine bay with carbon fiber, molded to precise dimensions that only pre-preg. materials can achieve. These parts are exotic-looking, race-inspired, and are unmatched in quality.Pre-preg. Carbon fiber manufacturing process: engine covers are vacuum-bagged and cured in the autoclave at high temperatures, ensuring quality, durability, and extremely-high strengh-to-weight ratiosFade-resistant clear coat: engine covers are finished with UV-stable, production clear coat paint, then individually hand-polished to a brilliant shine$355.00 - $734.95
Shop By Service Type
Popular Products
2011 Mazda RX-8 Models
Popular Searches