Toyota Sequoia 2010-2012, MXP Series Dam High-Density Polyethylene Black Cold Air Intake System with Intake Tube and Airbox by AIRAID®. The MXP Series air intake system positions a large 360º AIRAID air filter with a huge air inlet in the stock location, but encloses it in a roto-molded polyethylene airbox that seals against the hood, forming an enclosure. The airbox features massive air inlets that are positioned to allow only the coolest outside air inside the box. This enables the air filter to channel large quantities of cool, dense air to the engine, resulting in more horsepower and torque, and improved performance.
Fitment notes: This is a Federal (EPA) compliant part, legal for use on vehicles built to meet Federal EPA standards ONLY. It is NOT legal for installation on vehicles required to meet CARB standards and/or registered in California and other states which follow CARB standards.
|Filter Shape: Round|
|Filter Color: Red|
|Tube Finish: Black|
|System Type: Cold Air Intakes|
|Material: High-Density Polyethylene|
|HP Gain: up to 9 hp|
|RPM Gain: 4650|
- Superior horsepower and acceleration gains
- Replaces stock intake tubing, air filter and air box (where applicable)
- CAD designed and dyno tested for each specific application
- Easy to install using commonly available tools
- High airflow premium air filter
- Comes complete with everything required for installation, including comprehensive instructions
- Can be installed with simple hand tools; no drilling, cutting or fabrication required
- Washable and reusable air filter media
- No Hassle Lifetime Warranty
- Air Intake
- 5 Stainless Steel Worm Gear Clamps
- 2 Couplers
Increased airflow to your engine will increase horsepower and torque, but if that air is cooler and denser your engine will make even more power! Cooler, denser air contains more oxygen, and more oxygen in your engine's air intake charge means better combustion, resulting in greater engine output.
The MXP Series takes the Cold Air Dam Intake System to the next level. The molded polyethylene MXP airbox seals against the hood and forms a complete enclosure for the SynthaMax air filter. The airbox air inlets are located to allow only the coolest outside air into the airbox. This results in massive quantities of only the coolest air reaching your engine.
The SynthaMax filter is 100% synthetic, with an inner filter media consisting of two distinct layers of specifically designed synthetic materials that have separate performance characteristics. These layers are designed to work together to provide outstanding airflow and exceptionally high filtration. Contaminants are first captured by the outer layer of synthetic needlefelt polyester material, designed for wet and dry filtration with high airflow capacity. The inner layer of rayon/polyester captures any remaining contaminants while maintaining high airflow and low restriction. The inner filter media is supported by an inner and outer layer of wire mesh for strength and durability. This filter is over 99% efficient, meaning it allows more airflow while filtering out dirt particles ordinary filters let pass. You get better performance without sacrificing air filtration.
Also included is a molded polyethylene intake tube, which further aids airflow to the engine. This tube is less affected by engine heat than steel or aluminum tubing.
The MXP Series Cold Air Dam Intake System comes complete with everything necessary for installation, including comprehensive instructions. And it's backed by AIRAID's "No Hassle" warranty. There are no limitations or fine print here. Simply, if you're ever dissatisfied with the materials, workmanship, or performance of this air intake system, just send it back... period! You don't have to worry about a proof of purchase or a warranty card. AIRAID air intake systems are warranted for life.
AIRAID® was founded in 1997 when they began developing and manufacturing air intake systems for light trucks and SUVs, utilizing the cotton-gauze filter technology that was available at the time. These systems increased airflow and performance while being easy to install, and sold so well that the company soon realized that another source of filters was necessary. They believed they could produce a better quality filter using new technology and state-of-the-art materials, and so in 2002 the AIRAID Filter Company was formed. Today AIRAID is the recognized leader in air management technology. Extensive research and development has allowed AIRAID to come to market first with high quality products that improve drivability and performance.