2010 Ford Fusion Performance Exhaust Systems

Change Vehicle
Show items:
Sort by:
Select Engine
  • Select Engine
  • 2.3L
  • 2.5L
  • 3.0L
  • 3.5L
  • Exhaust Systems
  • Headers
  • Catalytic Converters
  • Mufflers
  • Exhaust Tips
  • Exhaust Pipes
  • Oxygen Sensors
  • Clamps, Hangers, Gaskets
    • (1 review)
      # mpn1109053
      Ford Fusion 2.5L 2010, Street Series™ Stainless Steel Cat-Back Exhaust System with Dual Rear Exit by MagnaFlow®. Exhaust Type: Cat-Back. Exhaust Tubing Material: Stainless Steel. Main Tubing Diameter: 2.25". Exhaust System Sound:...
      $583.14
    • (2 reviews)
      # 1002151627
      Ford Fusion 3.0L / 3.5L 2010, Street Series™ Stainless Steel Cat-Back Exhaust System with Split Rear Exit by MagnaFlow®. Exhaust Type: Cat-Back. Exhaust Tubing Material: Stainless Steel. Main Tubing Diameter: 2.25". Exhaust System...
      $765.47 - $815.84
    • (0 reviews)
      # 98136044
      Ford Fusion 2010, OEM Grade Stainless Steel Exhaust Manifold with Integrated Catalytic Converter by MagnaFlow®. Primary Tubing Diameter: 1.5". Collector Outlet Diameter: 2.5". Emissions: EPA compliant. Color: Silver. Header Coating:...
      $584.38 - $603.43
    • (0 reviews)
      # mpn132372978
      Ford Fusion Hybrid 2010, Heavy Metal Catalytic Converter by MagnaFlow®. Emissions: EPA compliant. Converter Configuration: Direct Fit. With Gasket. Without Air Tube. Without O2 Sensor Port. Catalytic Inlet Diameter: 2.25". Catalytic...
      $201.98
    • (0 reviews)
      # 70984880
      Ford Fusion 2010, OEM Grade Catalytic Converter by MagnaFlow®. Emissions: EPA compliant. Converter Configuration: Direct Fit. If your car needs replacement, install one that will get you through the smog check. This converter is part of...
      $202.65 - $547.05
    • (0 reviews)
      # 316991813
      Ford Fusion 2010, OEM Grade Catalytic Converter by MagnaFlow®. Emissions: EPA compliant. Converter Configuration: Universal Fit. Without Air Tube. Without O2 Sensor Port. Catalytic Inlet Diameter: 2.25". Catalytic Outlet Diameter:...
      $122.43 - $136.20
    • (0 reviews)
      # 294691619
      Ford Fusion 2010, Round Exhaust Tip by Walker®. Tip Shape: Round. Tip Length: 5.5". With their extensive selection of accessories and hardware for the exhaust system, Walker will provide you with everything needed to do the complete...
      Manufactured from Aluminized SteelHigh Durability
      $17.46 - $30.15
    • (3 reviews)
      # 505319873
      Ford Fusion FWD 3.0L 2010, Stainless Steel Round Inside Roll Angle Cut Natural Exhaust Tip by AP Exhaust®. Tip Shape: Round. Tip Cut Type: Angle Cut. Tip Inlet Diameter: 2.25". Tip Outlet Diameter: 3". Tip Length: 5.5". Tip Attachment...
      Made from first-rate materialsEnsures outstanding durability
      $23.52
    • (0 reviews)
      # mpn474124966
      Ford Fusion 2.5L 2010, Xlerator Aluminized Steel Pencil Style Round Inside Roll Chrome Exhaust Tip by AP Exhaust®. Tip Shape: Round. Tip Inlet Diameter: 1.75". Tip Outlet Diameter: 1.75". Tip Length: 5.25". Tip Attachment Style:...
      Made from first-rate materialsEnsures outstanding durability
      $8.64
    • (0 reviews)
      # 1075953573
      Ford Fusion 2010, Exhaust Tail Pipe Tip by Eastern Exhaust®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship....
      Will cover your exhaust needs and even moreBuilt with high performance in mind
      $5.41 - $16.26
    • (0 reviews)
      # mpn3918361130
      Ford Fusion 2.3L 2010, Exhaust Header Gasket by Patriot Exhaust®. This superior Patriot EXhaust product is just for you. Carefully designed for maximum performance, is will more than just meet your needs and expectations. This product...
      Expertly crafted from premium materialsQuality design and workmanship
      $8.89
    • (2 reviews)
      # 115270763
      Ford Fusion 2010, Replacement Exhaust Kit by Walker®. If you are looking for the ultimate in quality and value, then this superior replacement exhaust kit by Walker is what you need. All its components are designed with precision...
      Direct fit replacementIncludes all applicable flanges, hangers, and sensor fittings
      $29.94 - $322.72
    • (0 reviews)
      # 165449596
      Ford Fusion 2010, Replacement Exhaust Kit by AP Exhaust®. Get confidence with this high-standard OE quality purchase which is perfect for those who want to perform a long-lasting exhaust system repair. Made from top-notch materials,...
      Superior replacement for your worn out exhaust partHelps put your vehicle back to its tip-top shape
      $70.25 - $412.77
    • (0 reviews)
      # 466368390
      Ford Fusion 2010, Cast Iron Natural Exhaust Manifold by Dorman®. Emissions: CARB compliant. Finish: Natural. Color: Natural. Header Coating: Uncoated. This product is made of high-quality materials to serve you for years to come....
      High Quality tubular construction protects against warping and/or crackingLeak-resistant for long-lasting performance
      $83.95 - $99.95
    • (0 reviews)
      # mpn2072617545
      Ford Fusion 3.0L 2010, Cast Iron Natural Exhaust Manifold with Integrated Catalytic Converter by Dorman®. Position: Front. Emissions: EPA compliant. Finish: Natural. Color: Natural. Header Coating: Uncoated. More like a complete kit...
      Includes heat-shield for protection of hoses, wiring, and other engine componentsConstruction protects against warping and/or cracking
      $323.95
    • (0 reviews)
      # 564981720
      Ford Fusion 3.0L 2010, Ultra™ Stainless Steel Exhaust Manifold with Integrated Catalytic Converter by Walker®. Position: Front Driver Side. Emissions: EPA compliant. Walker is an OE supplier to many major nameplate vehicle...
      Constructed to meet your vehicle’s specific emissions requirementsDesigned to meet EPA regulations
      $322.16
    • (0 reviews)
      # mpn1261025
      Ford Fusion 3.0L 2010, ECO III Stainless Steel Exhaust Manifold with Integrated Catalytic Converter by Eastern®. Position: Front Driver Side. Emissions: EPA compliant. If you need to replace your failed or damaged manifold, this product...
      Direct OEM replacementConverts harmful engine emissions to less dangerous gases and water vapor
      $341.43
    • (0 reviews)
      # 231091940
      Ford Fusion 3.0L 2010, Exhaust Manifold with Integrated Catalytic Converter by DEC®. Emissions: EPA compliant. Pick out a catalytic converter by DEC and get your emissions back into check without worrying to fail again. These catalytic...
      Direct fitMade from a heavy duty stainless steel outer shell
      $369.85 - $398.41
    • (0 reviews)
      # mpn2179319982
      Ford Fusion FWD 3.0L 2010, Stainless Steel Direct Fit Exhaust Manifold with Integrated Catalytic Converter by AP Exhaust®. Position: Front Driver Side. Emissions: EPA compliant. The growing concern for the environment means there is a...
      5-year / 50,000-mile warranty on converterSpecifically engineered for Manifold Converter equipped vehicles.
      $402.14
    • (0 reviews)
      # mpn1300971041
      Ford Fusion 3.0L 2010, Exhaust Manifold with Integrated Catalytic Converter by Davico®. Position: Front Driver Side. Emissions: EPA compliant. This product by Davico will be a great solution to replace your failed or damaged catalytic...
      Helps your vehicle emit harmless gasesDirect OEM replacement
      $374.41
    • (1 review)
      # 286231591
      Ford Fusion 2010, Ultra™ Catalytic Converter by Walker®. Emissions: EPA compliant. Converter Configuration: Direct Fit. With 1 Inlet. Walker is an OE supplier to many major nameplate vehicle manufacturers. Trust Walker, an industry...
      Constructed to meet your vehicle’s specific emissions requirementsBody and pipe heat shields made of high quality materials for durability
      $124.20 - $322.72
    • (0 reviews)
      # 1016094437
      Ford Fusion 3.0L 2010, Ultra™ Catalytic Converter and Pipe Assembly by Walker®. Emissions: EPA compliant. Converter Configuration: Direct Fit. Position: Front Passenger Side. Catalytic Converter Body Shape: Round. With 1 Inlet. With...
      High precious metal load and high technology washcoat for premium performanceBody and pipe heat shields made of high quality materials for durability
      $199.04
    • (0 reviews)
      # 1013650060
      Ford Fusion 3.0L 2010, Ultra™ Catalytic Converter and Pipe Assembly by Walker®. Emissions: EPA compliant. Converter Configuration: Direct Fit. Position: Front Passenger Side. Catalytic Converter Body Shape: Round. With 1 Inlet. With...
      High precious metal load and high technology washcoat for premium performanceBody and pipe heat shields made of high quality materials for durability
      $199.04
    • (0 reviews)
      # mpn1806781
      Ford Fusion FWD 3.0L 2010, Ultra™ Catalytic Converter by Walker®. Emissions: EPA compliant. Converter Configuration: Universal Fit. Position: Rear. Catalytic Converter Body Shape: Large Oval. With 1 Inlet. Without Air Tube. Without O2...
      Constructed to meet your vehicle’s specific emissions requirementsFeatures stainless steel body with aluminized steel pipe and heat shields
      $95.45
    • (0 reviews)
      # 172069081
      Ford Fusion 2010, ECO III Catalytic Converter by Eastern®. Emissions: EPA compliant. Converter Configuration: Direct Fit. With 1 O2 Sensor Port. If you need to replace your failed or damaged catalytic converter, this product is the...
      Direct OEM replacementDesigned with twice the amount of Rhodium to help keep the MIL off on vehicles with high mileage, low emissions, or higher than normal emissions
      $142.86 - $400.86
    • (0 reviews)
      # mpn1206804
      Ford Fusion 3.0L 2010, Standard Catalytic Converter by Eastern®. Emissions: EPA compliant. Converter Configuration: Universal Fit. Position: Rear Undercar. Catalytic Converter Body Shape: Oval. Without Air Tube. Without O2 Sensor Ports....
      Converts harmful engine emissions to less dangerous gases and water vaporAdvanced design for maximum engine output
      $34.97
    • (0 reviews)
      # 140269095
      Ford Fusion 2010, Catalytic Converter by DEC®. Emissions: EPA compliant. Converter Configuration: Direct Fit. Pick out a catalytic converter by DEC and get your emissions back into check without worrying to fail again. These catalytic...
      Direct fitMade from a heavy duty stainless steel outer shell
      $241.33 - $392.70
    • (0 reviews)
      # 80137095
      Ford Fusion 2010, Catalytic Converter by AP Exhaust®. Emissions: EPA compliant. Converter Configuration: Direct Fit. The growing concern for the environment means there is a growing need for quality emission control products. AP...
      5-year/50,000-mile warranty on converter body25,000-mile warranty on emissions
      $182.67 - $260.24
    • (0 reviews)
      # 447156782
      Ford Fusion 2010, Catalytic Converter by Davico®. Emissions: EPA compliant. Converter Configuration: Direct Fit. This direct-fit catalytic converter by Davico will be a great solution to replace your failed or damaged catalytic...
      Helps your vehicle emit harmless gasesDirect OEM replacement
      $148.45 - $338.99
    • (0 reviews)
      # 18155810
      Ford Fusion 2010, Quiet-Flow™ Stainless Steel Oval Aluminized Exhaust Muffler and Pipe Assembly by Walker®. Muffler Inlet Diameter: 2". Muffler Body Length: 14". Muffler Configuration: Offset - Offset. Together with delivering...
      Designed for OE equivalent sound and precision fitSpun-locked heads for a proper resistance to backfire
      $70.86 - $102.29
    • (0 reviews)
      # 85230736
      Ford Fusion 2010, Stainless Steel Aluminized Resonator Assembly by Walker®. Muffler Inlet Diameter: 2.25". Muffler Outlet Diameter: 2.25". If you want exhaust piping that delivers precise OE-style fit, appearance, and reliability, this...
      Designed to directly replace the factory partMade with precision benders and fixture checked
      $29.94 - $114.12
    • (1 review)
      # 228793299
      Ford Fusion 2010, Aluminized Steel Exhaust Front Pipe by Walker®. Material: Aluminized Steel. With their extensive selection of accessories and hardware for the exhaust system, Walker will provide you with everything needed to do the...
      Made of high quality aluminized steelCorrosion resistant
      $77.79 - $111.68
    • (0 reviews)
      # 18138151
      Ford Fusion 2010, Aluminized Steel Exhaust Intermediate Pipe by Walker®. Material: Aluminized Steel. With their extensive selection of accessories and hardware for the exhaust system, Walker will provide you with everything needed to do...
      Made of high quality aluminized steelCorrosion resistant
      $15.53 - $37.81
    • (0 reviews)
      # 73579784
      Ford Fusion 2010, Professional™ Oxygen Sensor by ACDelco®. If your O2 Sensor is not functioning properly, you are robbing yourself of performance and costing yourself money at the gas pump. Let ACDelco’s Professional Oxygen Sensors...
      ACDelco Professional Oxygen Sensors earn the name ACDelco by being put through a variety of tests, often under extreme and unusual conditionsCustomers can receive better gas mileage with a properly working oxygen sensor
      $36.35 - $92.67
    • (0 reviews)
      # 199965412
      Ford Fusion 2010, Oxygen Sensor by Delphi®. As one of the leading suppliers of oxygen sensor technology since 1978, Delphi planar technology is the result of their OE and aftermarket engineers partnering together to develop the most...
      OE connectors and wire lengths within 3" of OE specificationsResists high temperatures, vibration damage and wire corrosion to protect signal accuracy, and long life
      $30.02
    • (0 reviews)
      # 72012847
      Ford Fusion 2010, Oxygen Sensor by Motorcraft®. Is your CHECK ENGINE light on? Has your vehicle failed a state emissions test? Your vehicle's emissions control system is in need of repair, but before you waste your time and gas running...
      Designed for specific Ford, Mercury, and Lincoln vehiclesBuilt to strict Ford Motor Company specifications
      $34.41 - $92.65
    • (3 reviews)
      # 24156661
      Ford Fusion 2010, Premium Oxygen Sensor by Bosch®. A worn-out oxygen sensor can cause engine performance problems and shorten the life of the catalytic converter. Tune-up your vehicle with an Oxygen Sensor from Bosch that is equally...
      Up to 15 % savings in fuel costsReduced CO2 emissions
      $26.57 - $38.02
    • (0 reviews)
      # 24156684
      Ford Fusion 2010, Universal Fit Oxygen Sensor by Bosch®. Universal Oxygen Sensors with OE SmartLink are quick and easy to install. Each sensor has enough length of sensor wire to allow maximum replacement of worn harnesses. Properly...
      Patented SmartLink™ connector systemNo special tools required for installation
      $34.02 - $34.78
    • (0 reviews)
      # 164590669
      Ford Fusion 2010, Wideband Oxygen Sensor by Bosch®. Position: Upstream. This sensor utilizes a sophisticated sensing element enabling it to produce a precise output in proportion to the air/fuel ratio. Wideband sensors use a more...
      Detects the exact amount of unburned fuel in the exhaust streamOE connectors and OE-style harness for continuous wire from connector to sensor
      $84.32 - $129.24
    • (0 reviews)
      # 710347084
      Ford Fusion 2010, Air Fuel Ratio Sensor by Denso®. Make sure your engine runs efficiently and produces fewer emissions by replacing your malfunctioning fuel-ratio sensors with these top-notch products designed by Denso. Engineered with...
      Designed to help reduce fuel consumption and harmful emissionsMade with the use of state-of-the-art sensor technologies
      $74.42 - $85.43
    • (0 reviews)
      # 710399099
      Ford Fusion 2010, Oxygen Sensor by Denso®. Denso's light duty oxygen sensor started to appear on vehicles with the development of fuel injection systems. The basic job of the sensor is to monitor the air fuel mixture under idle,...
      Corrosion-resistant stainless steel constructionPTFE filter blocks efficiency-robbing contaminants
      $25.10 - $42.35
    • (0 reviews)
      # 21086635
      Ford Fusion 2010, Universal Fit Oxygen Sensor by Denso®. Denso's light duty oxygen sensor started to appear on vehicles with the development of fuel injection systems. The basic job of the sensor is to monitor the air fuel mixture under...
      Corrosion-resistant stainless steel constructionPTFE filter blocks efficiency-robbing contaminants
      $35.08
    • (0 reviews)
      # 152233220
      Ford Fusion 2010, Air Fuel Ratio Sensor by NTK®. Air/Fuel Ratio Sensors Utilize a Sophisticated Sensing Element that Enables Them to Produce a Precise Output in Proportion to the Air/Fuel Ratio. AFR Sensors Provide the ECU with an Exact...
      Increases vehicle fuel economy and engine performance while decreasing vehicle exhaust emissionsDirect replacement
      $62.52 - $105.14
    • (0 reviews)
      # 22137923
      Ford Fusion 2010, Oxygen Sensor by NTK®. Thimble type sensors feature a ceramic element that projects into the exhaust system and becomes electrically conductive at high temperature. The sensor element then sends voltage signals back to...
      Increases vehicle fuel economy and engine performance while decreasing vehicle exhaust emissionsDirect replacement
      $23.83 - $40.24
    • (0 reviews)
      # 22834561
      Ford Fusion 2010, Oxygen Sensor by Spectra Premium®. To ensure your vehicle has optimal performance and fuel economy while producing minimal emissions replace a defective O2 sensor with one backed by the aftermarket’s most rigorous...
      Increase vehicle fuel economy and engine performance while decreasing vehicle exhaust emissions100% performance tested to meet vehicle requirements
      $21.92 - $167.50
    • (0 reviews)
      # 1060538590
      Ford Fusion 2010, Oxygen Sensor by Aceon®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from...
      Designed to provide long-lasting service lifeMade utilizing state-of-the-art equipment
      $17.91 - $49.07
    • (0 reviews)
      # 1106434106
      Ford Fusion 2010, Exhaust Pipe Gasket by Eastern Exhaust®. EE™ is vertically integrated and manufactures vast amounts of strong steel tubing for use as straight and bent exhaust-pipes and tail-pipes components. EE™ forms and bends...
      Will cover your exhaust needs and even moreBuilt with high performance in mind
      $2.67 - $6.84
    • (0 reviews)
      # 1075958335
      Ford Fusion Flex 2010, Mild Steel Exhaust Clamp by Eastern Exhaust®. Length: 2.625". Height: 3.125". Width: 0.5". Pipe Diameter: 2.125". This top-grade product is expertly made in compliance with stringent industry standards to offer a...
      Will cover your exhaust needs and even moreBuilt with high performance in mind
      $1.15
    • (0 reviews)
      # 128880915
      Ford Fusion 2010, DGM Style Mild Steel Natural Exhaust Clamp by AP Exhaust®. This superior product was carefully designed with key attention to detail and manufactured from high-grade materials to the strict standards of the highest...
      Made from first-rate materialsEnsures outstanding durability
      $1.36 - $1.42
    • (3 reviews)
      # 17738885
      Ford Fusion 2010, Heavy Duty Steel Natural U-Bolt Clamp by Walker®. Material: Steel. With their extensive selection of accessories and hardware for the exhaust system, Walker will provide you with everything needed to do the complete...
      Makes installation quick and easyOptimal OE-style fit and quality
      $1.33 - $1.46
    • (0 reviews)
      # 231267003
      Ford Fusion 2010, Exhaust Manifold Gasket Set by Fel-Pro®. If you need durable gaskets to prevent leaks on your vehicle, Fel-Pro is the way to go. Engineered using the latest technologies and global engineering resources, the gaskets...
      Direct OEM replacement for a proper fitEnsures reliable sealing performance
      $8.48 - $16.30
    • (0 reviews)
      # mpn603916
      Ford Fusion MFI 2.5L 2010, Multi-Layer Steel Exhaust Manifold Gasket by Victor Reinz®. Material: Multi-Layer Steel. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art...
      High quality at an affordable priceExpertly made from premium materials
      $14.83
    • (0 reviews)
      # mpn621190
      Ford Fusion 3.5L 2010, Steel and Composition Exhaust Seal Ring by Victor Reinz®. Material: Steel and Composition. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology...
      High quality at an affordable priceExpertly made from premium materials
      $6.39
    • (0 reviews)
      # mpn4486229170
      Ford Fusion 2.5L 2010, Exhaust Manifold Gasket by Mahle®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and...
      High quality at an affordable priceExpertly made from premium materials
      $26.97
    • (0 reviews)
      # 1092446829
      Ford Fusion 2010, Exhaust Manifold Gasket Set by Apex Auto®. Designed utilizing the latest technology, this product by Apex Auto features premium quality and will perform better than advertised. Perfect for your vehicle and lifestyle,...
      Quick accurate delivery with excellent fill-rateExcellent inventory availability
      $5.00 - $10.34
    • (0 reviews)
      # 581094150
      Ford Fusion 2010, Exhaust Manifold Gasket Set by DNJ Engine Components®. Get this top-grade quality replacement for your worn out part from DNJ. Expertly crafted from premium materials, this product is of the finest quality to provide...
      Designed to restore your vehicle's original performanceProvides superior sealing performance
      $5.83 - $14.38
    • (0 reviews)
      # mpn4482355958
      Ford Fusion 2.5L 2010, Catalytic Converter Gasket by Mahle®. Position: Rear Forward. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind....
      High quality at an affordable priceExpertly made from premium materials
      $3.71
    • (3 reviews)
      # 18124744
      Ford Fusion 2010, Exhaust Pipe Flange Gasket by Walker®. With their extensive selection of accessories and hardware for the exhaust system, Walker will provide you with everything needed to do the complete exhaust job. When you choose...
      Makes installation quick and easyOptimal OE-style fit and quality
      $1.38 - $7.73
    • (0 reviews)
      # 137112113
      Ford Fusion 2010, Exhaust Pipe Flange Gasket by Genuine®. Position: Rear. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet...
      High quality at an affordable priceExpertly made from premium materials
      $24.10
    • (0 reviews)
      # 40640214
      Ford Fusion 2010, Exhaust Pipe Flange Gasket by Fel-Pro®. If you need durable gaskets to prevent leaks on your vehicle, Fel-Pro is the way to go. Engineered using the latest technologies and global engineering resources, the gaskets...
      Direct OEM replacement for a proper fitEnsures reliable sealing performance
      $2.14 - $5.58




    Guides & Articles

    Useful articles fast to read and guides easy to understand written by mechanics and car enthusiasts to turn your shopping experience with CARiD into a pleasure

    • Automotive Tools
      August 30, 2017
      What Special Tools Are Available For Exhaust...
      Exhaust work can be challenging. Old parts are usually corroded and difficult to separate, and new ones sometimes need minor fitment adjustments during installation....
      by Timothy Zahl
    • Performance Exhaust Systems
      May 17, 2016
      Here's A 'Tip': Exhaust Tips Are An Easy Way To...
      Performance exhaust systems give you improvements in power output, sound levels, and appearance, all in one package. But let's face it: not everyone has the spare...
      by Michael Grayen
    • Performance Exhaust Systems
      August 18, 2015
      Are Headers Worth The Performance Improvement?
      Engines have often been compared to air pumps, because the engine that’s most efficient in terms of economy and power is the one that can get air in and out of its...
      by Michael Grayen
    • Performance Exhaust Systems
      August 18, 2015
      Are X-pipes and H-pipes Better Than Straight...
      You may be wondering why so many aftermarket performance exhaust system manufacturers are offering dual exhaust systems connected by "H-pipe" or "X-pipe" sections....
      by Timothy Zahl
    • Performance Exhaust Systems
      August 17, 2015
      Power, Sound, Looks | Can I Have It All With a...
      It's an age-old question that many have asked. Will an aftermarket exhaust be worth the expense? While they definitely can be, an important question to ask yourself is...
      by Timothy Zahl
    • Bed Accessories
      April 17, 2015
      Pickup Truck Cab And Bed Sizes Are Important...
      Americans love to have choices. Buying a dress shirt? Decide solid or stripe, short or long sleeve, cotton or poly blend, button or spread collar, regular fit, slim...
      by Timothy Zahl
    • Replacement Exhaust Parts
      August 01, 2014
      Direct Fit vs. Universal Mufflers
      Regardless of whether you're shopping for a simple replacement muffler that delivers original equipment (OE) sound and performance or an upgraded muffler which...
      by Michael Grayen

    Popular Products

    2010 Ford Fusion Performance Exhaust Systems Reviews

    Average rating:  5  5 - 1 review
    4.8 of 5
    2011 Ford Fusion 2.5L Engine
    Bought the MagnaFlow Street Series Stainless Steel Cat-Back Exhaust System for my Ford Fusion. Looks just as good as in the picture. This system actually looks meaner than the OEM. Was easy to install. The quality is great, because the exhaust is a better quality than the OEM. The listing said the benefits of the exhaust system were increase of horsepower. I can feel the increase in HP. However, my MPG went down from about 30.0 - 30.2 to 20.5 - 20.6. More HP, better look, and a much deeper sound that isn't too loud and doesn't sound like fart noises is an A+. Plus, the exhaust system doesn't cause a lot of vibration in the car like an exhaust system I bought for a Honda Accord that I used to have.
    DPosted by Daniel (Phoenix, AZ) / July 12, 2013
    2012 Ford Fusion
    Was this review helpful for you? YesThis review was helpful for 2 users!

    Related 2010 Ford Fusion Pages
    2010 Ford Fusion Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.