Hummer H2 4WD 2009, B8 5160 Series Driver or Passenger Side Monotube Smooth Body Shock Absorber by Bilstein®. Quantity: 1 per Pack. B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting, providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
Notes: It’s recommended to replace shock or strut in pairs (passenger and driver side at the same time).
|Finish: Zinc Plated|
|Diameter: 1.81" (46.9 mm)|
- Bilstein's industry leading monotube design
- Zinc finish with multi-layer unique Bilstein coating for extreme protection
- Remote reservoir dramatically increases shock oil capacity for even greater heat dissipation and damping sensitivity
- Special swivel banjo fittings allow for 360° of rotation
- Vehicle specific reservoir mount kit included
Road-Tested by Bilstein. To achieve that celebrated BILSTEIN driving experience, BILSTEIN engineers rely on not only technology that is truly at the cutting edge, but also something that has withstood the test of time: how it feels to the driver. As a result, all of Bilstein high-performance absorbers, as well as Bilstein sport suspensions and threaded ride height adjustable kits, undergo a rigorous testing programme. On the Nürburgring and in Bilstein own test centre at the Papenburg test track, Bilstein drivers test how balanced the driving characteristics of various vehicles are in a variety of different driving situations. Only when they have passed this programme of tests with distinction are they allowed to bear the BILSTEIN name. This way, Bilstein can guarantee that celebrated BILSTEIN driving experience.
Gas Pressure Technology. Over time, the mono-tube gas pressure technology developed by BILSTEIN has established itself as a standard in automotive construction. This technology involves keeping the oil in the absorber under pressure, which prevents it from foaming when temperatures and loads are increasing. As a result, full damping power is retained even when the system is placed under extreme stress, a feature that can be observed in the self-lowering piston.
Mono-tube Upside-Down Technology. The original and best: The original mono-tube gas pressure shock absorbers bore the BILSTEIN name, and BILSTEIN still responsible for producing the best there is. BILSTEIN’s mono-tube technology is the number-one choice in motorsports and series-production sports cars: no other type gives engineers the same freedom to choose the perfect installation location or position (e.g. Upside-Down technology).
In 1954, Bilstein® was the first to realize the potential offered by an idea of Prof. Bourcier de Carbon, a French researcher in the field of vibrations. The aim was to eliminate the physical disadvantages of the conventional telescopic shock absorbers, whilst at the same time making the dampers lighter and able to be fitted in any position. The name Bilstein has for many decades been closely associated with high tech in the field of suspension design, driving comfort and safety. In order to expand this position in the future, Bilstein became a division of ThyssenKrupp Technologies AG in 1988, and a wholly-owned subsidiary in 2005. The partnership and co-operation within the group will enable the company to continue to inspire with innovations in the traditional Bilstein way.