Mazda 3 2008, Drilled and Slotted 1-Piece Brake Rotors by SP Performance®. What does your vehicle do in an emergency stopping situation? Your front end drops, and your tires grip the asphfalt bringing your vehicle to a screeching stop. No, then you need to upgrade to SP Performance Cross Drilled and Slotted Brake Rotors. With the benefits of both drilling and slotting, these brake rotors run cooler and grip like hook and loop fastener when you apply the brakes. SP Performance Cross-Drilled and Slotted Brake Discs are a unique design providing the best combination of rotor bite, cooling and out-gassing. The holes and slots, vent gasses, improve air circulation and increase brake pad bite providing incredible stopping performance compared to stock rotors. Directional Curved Slots: Slots helps increase pad bite, improves air circulation and cooling. The slots also help vent gasses, reduce brake fade and stop brake hydroplaning in wet weather reducing stopping distances. Cross Drilled Holes: Holes are machined with SP Performance Exclusive Sinusoid Curve Chamfer, which promotes cooling and minimizes stress. They maximize air circulation, and with absolutely no sharp edge, SP Performance chamfer reduces the possibility of heat checking and increases both rotor and pad life. Rotor coating will disappear with time where the brake pads contact the rotor.
|Driving Style: Performance / Racing|
|Rotor Design: Rotors Only|
|Rotor Construction: 1-Piece|
|Rotor Style: Drilled & Slotted|
|Rotor Material: Cast Iron|
|Lug Holes Quantity: 5|
|Quantity: 2 Per Pack|
- Sized to match OEM dimensions while providing superior braking performance
- The benefits of Drilling and Slotting in one great package
- Increased Brake Pad Bite - Greatly Reduced Stopping Distances
- Vents gases and eliminates Brake Fade
- Maximized air circulation for best cooling
- Corrosion Resistant Coating for long-lasting protection against rust
- Improved wet weather stopping
- Most cost effective way of improving your vehicles braking performance
- Life Time Warranty - Guaranteed not to crack for the life of the rotors
- Runs cool but looks hot behind your wheels
- Made using durable materials to endure for a long time
- Designed to combine excellent performance and reliability
- Guaranteed to provide exceptional wear resistance
- Made to provide matchless quality and improve your driving comfort
- Proudly made in the USA
- Sold as a set for two wheels
Quality. SP Performance slotted and drilled discs are made using the finest quality castings that exceed OEM specifications. Designed with the use of CAD software and produced on CNC machines insures the highest quality and consistent performance.
Anti-Corrosion Finish. Corrosion resistant finishes give a stunning clean look behind your wheels while preventing rust, corrosion and oxidation. SP Performance Cross Drilled and Slotted Brake Discsc with Gray ZRC Finish: SP Performance ZRC anti-corrosion finish provides long lasting protection against corrosion in the most hostile salt-water environments. After being applied, SP Performance ZRC coating provides the highest level of galvanic protection. The ZRC coating is conductive. After the coating heats up during use, it bonds permanently to the metal surface. It will not allow the metal to corrode, even when the surface is scratched.
SP Performance Sinusoidal Curved Chamfered Hole. After many years of development SP have come up with a drilling and chamfering method that absolutely has no sharp edges. SP Performance brake discs are drilled with SP exclusive sinusoid curved chamfer. The chamfer promotes cooling, minimizes stress, vents moisture and dust while minimizing heat checking and cracking.
Advanced Drilling methods put SP Performance Cross Drilled and Slotted Brake Rotors above the rest in quality, performance, reliability and appearance. SP Performance rotors provide many advantages like quality, durability, looks and value. But the most important advantage is that your vehicle will stop quicker. SP Performance Drilled and Slotted Rotors provide over 30% better braking. If, for example, your vehicle takes 30 feet to come to a stop with your stock rotors, then a 30% improvement is equal to 9 feet. During an emergency stop, 9 feet can make all the difference between a safe stop and a dangerous accident.
Since its beginning, SP Performance® has led the way in the brake industry with its premium-grade performance brake rotors designed to improve your vehicle’s stopping power. With unique innovations and manufacturing techniques, SP Performance has become a leader in its technology of cross-drilling, slotting, diamond slotting, as well as cross-drilling and slotting. Advanced drilling methods put SP Performance brake rotors above the rest in quality, performance, reliability and appearance. The company has developed a drilling and chamfering method that has no sharp edges. SP Performance drills out its rotors with an exclusive sinusoid curved chamfer that promotes cooling, reduces stress, vents moisture and dust, while minimizing heat checking and cracking. Make your vehicle stop like a race car with SP Performance brake rotors!