Jeep Wrangler 2007-2017, 4" 24-LED Tail Light Push-In by Poison Spyder Customs®. Chrome housing. Includes: Pigtail And Grommet. This LED tail & reverse light wiring kit is a must have for proper wiring of your custom rear lights by Poison Spyder so they will perform correctly and efficiently. The exclusive, Plug and Play wiring harness system is specially designed to connect directly to your Jeep factory wiring and allow for plugging in 4" round high intensity LED tail lights and 2-1/2" round LED reverse lights with OE quality, weather-tight connectors included. Each Poison Spyder tail light harness incorporates a wired-in load resistor to let turn signal lights flash at the correct speed. So, make your rear lighting setup a breeze with the top-notch harness system by Poison Spyder.
- Easy, plug-and-play installation solution for your customized rear LED lights
- Designed to work with Poison Spyder lights only
- Helps get all of your rear lights working quickly and correctly
- Supports 4" round LED tail lights and 2-1/2" round LED back-up lamps
- Connects directly to your Jeep OE wiring harness and directly to your rear LED lights
- Weatherproof connectors provide a positive, weather-tight connection just like the factory wiring
- Pigtail And Grommet
If you want to give your hardcore Jeep a boost in appearance and take your driving safety to the next level, upgrade to hardcore lighting components from Poison Spyder. They will add uniqueness to your vehicle and set it apart from mundane rolling masses while getting exceedingly bright, powerful illumination that will make your rear end more conspicuous to other drivers, reducing the chances for accidents. This complete LED tail & reverse light wiring harness kit comes with everything you may need for proper installation of your custom rear lights into the Poison Spyder crusher corners on your Jeep. This kit is specially designed to accommodate 4" round high intensity Poison Spyder LED tail light and 2-1/2" round LED reverse light setup and ensure these lights perform at their peak.
Get a big bang for your buck with this smart LED tail & reverse light wiring harness kit that will help save your time and money on searching and purchasing these components separately. The Poison Spyder wiring harness system is right what the doctor ordered to get your custom rear LED lights up and running in no time flat. It features an exclusive "Plug-N-Play" design that will take all of the guesswork, hassle and muscles when wiring your custom LED taillights, back-up lights and license plate/third brake lights. The Poison Spyder wiring harness system includes two main harness components to which the other components connect: the LED tail light harness for the driver side and LED tail light harness for the passenger side which has a 6-foot lead and weatherproof connector for the license plate light. The LED tail light harness system is designed to plug right into your Jeep’s factory wiring harness and connect directly to the rear lights via OE quality connectors providing a safe and secure, weatherproof connection as well as used for automotive quality wires and split-loom protective sheathing.
Both Poison Spyder driver and passenger side tail light wiring harnesses come complete with the right 3-prong connector for plugging directly into 4’’ round, 24-diode LED tail/ stop/turn lamps designed by Poison Spyder. They also have load resistors to simulate the proper power load in order to keep turn signals flashing at the right speed and prevent the vehicle's computer from failing. There's no need for wiring in these load resistors separately with wire taps and butt connectors. Two weather-tight connectors provided with each tail light harnesses allow for connecting up to two 2-1/2’’ round LED back-up lights per side, for a total of four such lamps. You can connect to back-up lamps located just below each LED tail light on Poison Spyder crusher corners using the 4’’ back-up light extension harness on each side or to back-up lights located in the recessed mounts found on many of Poison Spyder rear bumpers with an optional 24’’ back-up light extension harness, or to both. Each tail light harness includes 2 connectors wired into the vehicle's back-up light circuit to support both a 4" and a 24" back-up light extension harness on each side simultaneously. All the components included in this kit are proven to be of the finest quality, hard-wearing and deliver superior reliability year after year.
One of the most reputed names in the automotive industry, Poison Spyder Customs® is located in Banning, California. The brand manufactures a huge selection of high quality off-road equipment, including bumpers and stingers, rocker armors, rear corner armors, differential covers, etc. All products provided by the company are instantly recognizable for their signature Poison Spyder style that sets the benchmark for design in the entire industry. Developed and manufactured in the USA, they offer durability and functionality needed to overcome the most extreme trails and obstacles.