Acura TL 2006, 17" Remanufactured 5 Spokes Factory Alloy Wheel by CCI®. Size: 17" x 8". Bolt Pattern: 5 x 114.3mm. Offset: 45mm. Scraped, scuffed, bent, dented, or otherwise damaged wheels can detract from the appearance of a nice vehicle, but more importantly, can cause an unsafe driving condition. Damaged wheels may not hold air and can cause unsafe vehicle handling. If you're in need of a replacement alloy wheel, don't pay the high price at the dealer. CCI has remanufactured factory alloy wheels that meet or exceed new factory wheel standards. A CCI remanufactured factory alloy wheel will appear and function the same as a new wheel for much less cash, and it carries a limited lifetime warranty.
- Original factory wheel remanufactured to meet or exceed new wheel standards
- Same quality as new OE (original equipment) for less money
- Direct replacement, will match your existing wheels in every way
- Accommodates OE center cap and lug nuts
- Remanufactured using the latest and most modern reconditioning techniques
- Reconditioning process ISO 9001:2000 Certified
- Meets or exceeds SAE (Society of Automotive Engineers) and ASTM (American Society for Testing and Materials) wheel testing standards
- Wheels and remanufacturing facilities periodically inspected to ensure the highest quality standards are maintained
- Backed by a limited lifetime warranty
You accidently hit a curb or other obstacle and bend, dent, or abrade one of your vehicle's factory alloy wheels. Such damage is not only unsightly, it can be dangerous. A damaged wheel may not allow the wheel to stay seated on the bead and it may not hold air. A bent or dented wheel may not enable the tire to track properly, upsetting vehicle handling, and this kind of damage can also cause a bothersome vibration which can also wear suspension and driveline parts. But a new replacement wheel from the dealer is very expensive! Don't drive with a damaged wheel because of high dealer prices, not when you can get a factory remanufactured wheel from CCI. A CCI remanufactured factory alloy wheel is indistinguishable from a new wheel, and it will take a much smaller bite out of your wallet.
CCI carefully inspects all received factory alloy wheels to make sure they're repairable within their safety standards. Any wheel with damage that compromises the structural integrity, such as severe dents, elongated lug holes, or outer diameter defects, is rejected. This screening process ensures CCI remanufactured alloy wheels will meet or exceed industry safety standards. If accepted, the alloy wheel is straightened to tolerances tighter than specified by the OEM (original equipment manufacturer) to ensure a smooth ride, and all gouges are welded and hand detailed to exact specifications. The old wheel finish and any contaminants are removed, leaving bare metal. The applicable finish is then applied, including powder coating or liquid painting. If polishing is required, not only the face of the wheel but the entire barrel will be polished using state-of-the-art equipment. A final step of powder or liquid clear coat is applied and baked on for long lasting durability.
CCI wheels are remanufactured to meet or exceed SAE and ASTM wheel testing standards. To ensure this, wheels are periodically selected at random and tested. The Radial Fatigue Test stresses the wheel with a heavier than normal load in a straight line simulation, while the Rotary Fatigue Test stresses the wheel with a heavier than normal load in a cornering situation. CCI remanufactured alloy wheels exceed the standards for these tests and perform better than brand new wheels. The Side Impact Test simulates impacting/curbing wheels at high speed. CCI wheels met the standards for this test and equaled the performance of new wheels.
CCI Remanufactured Alloy Wheels are guaranteed to be free of defects in materials and workmanship for as long as the original purchaser owns the vehicle on which the wheel is installed.
Coast to Coast International® is a division of Keystone Automotive Industries, Inc. For over twenty years CCI company has evolved from a retail hubcap and wheel store into an international company. The Coast to Coast International has 4 locations in the United States. The headquarters are situated in Tampa FL, with distribution centers in Quincy IL, Tracy CA and Huntington IN. These centers allow to ship products quickly and economically all around the country and internationally. The inventories offer the largest selection of chromed automotive accessories including wheel covers, wheel skins, grille overlays and various other applications. The company manufactures high-quality products offering the newest and the hottest items that will enhance cosmetic effect of the vehicle.