Dodge Ram Diesel 1994-1997, Pulse Flow Hi-Sil Big Foot Moly Exhaust Manifold by ATS Diesel Performance®. ATS Multi-Piece Pulse Manifolds for the Dodge Cummins application have pulse exhaust flow design, helping to spool up the turbocharger sooner with less exhaust back pressure and increase fuel efficiency. This pulse manifold design eliminates the problems with shrinking and breaking, as well as cracking and gasket issues. ATS Multi-Piece Pulse Manifolds have pulse exhaust flow design, helping to spool up the turbocharger sooner with less exhaust back pressure and increase fuel efficiency. This pulse manifold design eliminates the problems with shrinking and breaking, as well as cracking and gasket issues. The stock manifolds can shrink as much as 3/8”. This can cause manifold-cracking, gasket problems, and exhaust flow problems created by exhaust port misalignment.
|Quantity: 3 Pieces|
- 30% larger internal diameter in critical areas
- Constructed out of High Silica Moly for strength and promote thermal energy transfer
- Compatible with stock and aftermarket turbos
- Ceramic coated for reduced under hood temperatures and a lasting finish
- Includes everything you need for easy installation
With each exhaust port inlet to the manifold, the main chamber continuously gets bigger, allowing for the added volume, but also to keep thermal velocity up as well. The expansion of the exhaust gasses through the manifold and up-pipe is what drives the turbine side of the turbo charger. The faster you can keep the velocity of the gas, the easier it is to spool the turbocharger. Thermal barriers play a part in this as well. Due to the material having a high ability to retain heat, the heat remains inside the manifold instead of being expelled. The hot exhaust gasses are still expanding as they exit the engine, and it is ideal to get those gasses into the turbocharger while theyre still expanding as this will create more action on the turbine wheel & result in a faster spool-up. This is one huge advantage to using a set of well-engineered exhaust manifolds over headers, which increase the time it takes the exhaust to reach the turbocharger due to the extra length added to the tubes in order to create equal-length pipes; the result of is the gasses are cooling and therefore contracting by the time they reach the turbine wheel, reducing the action created.
For about twenty years, ATS Diesel Performance® has been a prominent manufacturer of diesel truck performance products known all over the world for innovation and solid workmanship. The company strives to meet the most demanding requirements of its customers whether they need efficiency and power for off-road, recreation, towing, or racing. With a headquarter in Arvada, Colorado, ATS Diesel invents, designs, and makes a large variety of products for Dodge, GM, Ford, Chrysler and Jeep vehicles.