1990 Ford F-250 Performance Air Intake Systems

Change Vehicle
1 - 60 of 723 results
show:
sort by:
    • (0 reviews)
      # 333529
      Ford F-250 4.9L / 5.8L / 7.5L 1990, 57 Series FIPK Generation I Air Intake System without Intake Pipe by K&N®. Replacement Filter # RF-1012. Use with Pre-Filter # RF-1012DK. Air Filter Height: 9" (229 mm). Air Filter Material:...
      Guaranteed to increase horsepower and improve accelerationCustom designed and engineered for each application
      $245.99
    • (0 reviews)
      # 3144181
      Ford F-250 7.5L Regular Cab / SuperCab 1990, Short Ram Air Intake System with Oiled Filter by Banks®. System Type: Ram Air Intakes. Banks Ram-Air Intake System replaces the factory's flat panel filter with a large conical lifetime...
      High FlowMore power and torque
      $189.00
    • (0 reviews)
      # 141087856
      Ford F-250 4.9L / 5.8L / 7.5L 1990, Plastic Black Cold Air Intake System with Cleanable Cotton Filter by S&B®. Filter Color: Red. Tube Finish: Black. System Type: Cold Air Intakes. Material: Plastic. All intakes S&B produces is...
      High quality at an affordable priceExpertly made from premium materials
      $188.82
    • (0 reviews)
      # 34616493
      Ford F-250 4.9L / 5.0L / 5.8L / 7.5L 1990, 33 Series Panel Air Filter by K&N®. Air Filter Color: Red. Filter Material: Cotton Gauze. Filter Re-Oiling Amount: 1.09 oz (32 ml). Height: 1.188" (30 mm). Outside Length: 12.813" (325...
      Improves engine airflowIncreases horsepower and acceleration
      $47.99
    • (0 reviews)
      # 34616603
      Ford F-250 7.3L 1990, E Series Round Air Filter by K&N®. Air Filter Color: Red. Filter Material: Cotton Gauze. Filter Re-Oiling Amount: 4.28 oz (127 ml). Height: 4.938" (125 mm). Inside Diameter: 8.375" (213 mm). Outside Diameter:...
      Designed to boost horsepower and rate of accelerationCan be cleaned and used again
      $66.99
    • (0 reviews)
      # 80297867
      Ford F-250 4.9L / 5.0L / 5.8L / 7.5L 1990, SynthaFlow® Panel Air Filter by AIRAID®. Air Filter Color: Red. Filter Material: Cotton Gauze & Non-Woven Synthetic. Height: 1.188" (30 mm). Outside Length: 12.813" (325 mm). Outside...
      Improves airflow and engine performanceProvides superior air filtration and engine protection
      $58.04
    • (0 reviews)
      # 97198879
      Ford F-250 7.3L 1990, SynthaMax® Round Air Filter by AIRAID®. Air Filter Material: Non-woven Synthetic. Air Filter Material: Non-woven Synthetic. Air Filter Color: Red. Filter Material: Non-woven Synthetic. Height: 6" (152 mm)....
      Improves airflow and engine performanceProvides superior air filtration and engine protection
      $68.24
    • (0 reviews)
      # 918717
      Ford F-250 4.9L / 5.0L / 5.8L / 7.5L 1990, Magnum Flow™ Pro 5R Flat Panel Blue Air Filter by aFe®. Filter Types: Direct Fit Filter. Filter Shape: Flat Panel. Filter Color: Blue. This Pro 5R air filter provides performance...
      Deep Cotton Pleats for Increased FlowFits In Factory Housing
      $62.95
    • (0 reviews)
      # 918650
      Ford F-250 7.3L 1990, Magnum Flow™ Pro 5R Round Blue Air Filter by aFe®. Filter Types: Direct Fit Filter. Filter Shape: Round. Filter Color: Blue. Constructed with 100% polyurethane on top and bottom, this high flow, oiled OE...
      Improves airflow for better performance and accelerationPre-oiled, washable/reuseable air filter for long service life with life-time warranty
      $73.95
    • (0 reviews)
      # 921567
      Ford F-250 4.9L / 5.0L / 5.8L / 7.5L 1990, Magnum Flow™ Pro Dry S Panel Gray Air Filter by aFe®. Filter Types: Direct Fit Filter. Filter Shape: Panel. Filter Color: Gray. Constructed with 100% polyurethane on all four sides, this...
      For Improved Horsepower And TorqueLimited Lifetime Warranty
      $62.95
    • (0 reviews)
      # 921577
      Ford F-250 7.3L 1990, Magnum Flow™ Pro Dry S Round Gray Air Filter by aFe®. Filter Types: Direct Fit Filter. Filter Shape: Round. Filter Color: Gray. Constructed with 100% polyurethane on top and bottom, this high flow "oil-free"...
      Improves airflow for better performance and accelerationOil-free for easy quick servicing and yet washable/reuseable air filter for long service life with life-time warranty
      $73.95
    • (0 reviews)
      # 91560688
      Ford F-250 7.3L 1990, Oiled Air Filter by Banks®. Filter Types: Direct Fit Filter. Pleated cotton filter element outlasts other filters, and flows more than the factory pleated paper filter when installed in the Banks Ram-Air...
      Lifetime filter flows more cool, dense ram-air into engineEasily cleaned and re-oiled
      $61.82
    • (1 review)
      # 56293503
      Ford F-250 1990, Air Filter by Green Filter®. Filter Types: Direct Fit Filter. Replace your factory air cleaner filter element with a Green Filter oiled-cotton filter and never buy another filter as long as you own your vehicle....
      Cleanable, reusable filter element will outlast your carTraps particles as small as 5 microns
      $43.69 - $50.46
    • (0 reviews)
      # 49224375
      Ford F-250 4.9L / 5.0L / 5.8L / 7.5L 1990, HPR™ Panel Air Filter by Spectre Performance®. Air Filter Color: Red. Filter Material: Non-woven Synthetic. Filter Re-Oiling Amount: 25 ml (1 oz). Height: 1.12" (28 mm). Outside Length:...
      High performance and high air flow filterFilter media is non-woven synthetic and pre-dyed
      $19.91
    • (1 review)
      # 85095936
      Ford F-250 5.0L 1990, Officially Licensed Ford Engine Dress-Up Kit by Proform®. Material: Steel. Sold as One Kit. If you are looking to enhance your vehicle's performance, then this top-notch product is definitely what you need....
      Officially Licensed Ford ProductsCarefully designed to improve the performance of your vehicle
      $185.37 - $283.45
    • (0 reviews)
      # 85546010
      Ford F-250 7.3L 1990, Cotton Cleanable 8-ply Custom Red Air Filter by S&B®. Filter Types: Direct Fit Filter. Filter Shape: Custom. Filter Style: Non-Flanged. Filter Color: Red. All S&B air filters maintain high air flow...
      High quality at an affordable priceExpertly made from premium materials
      $37.56
    • (0 reviews)
      # 85544437
      Ford F-250 4.9L / 5.0L / 5.8L / 7.5L 1990, Cotton Cleanable 8-ply Panel Red Air Filter by S&B®. Filter Types: Direct Fit Filter. Filter Shape: Panel. Filter Style: Non-Flanged. Filter Color: Red. All S&B air filters maintain high...
      High quality at an affordable priceExpertly made from premium materials
      $35.24
    • (0 reviews)
      # 229350050
      Ford F-250 5.0L / 5.8L / 7.3L / 7.5L 1990, Mass Air Flow Sensor Kit by Edelbrock®. The Signature Series triangular air cleaner is a new style with a shape reminiscent of the muscle car era. This hot looking chrome air cleaner has...
      $158.92
    • (0 reviews)
      # 171822339
      Ford F-250 with Stock configuration Cylinder Head with Dual 4-barrel square bore Carburetor Mounting with 1500 - 6500 RPM Range with Ford Small Block Windsor Engine 5.0L 1990, F-28 Dual-Quad Intake Manifold by Edelbrock®. Their...
      The finest quality at a great priceWe carry everything needed to complete the job
      $369.95 - $631.23
    • (0 reviews)
      # 229350077
      Ford F-250 with Windsor Cylinder Head with 4-barrel Dominator Carburetor Mounting with 4500 - 8500 RPM Range with Ford Small Block Windsor Engine 5.8L 1990, Glidden Victor 351W Intake Manifold by Edelbrock®. Designed utilizing the...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $484.14
    • (0 reviews)
      # 17627368
      Ford F-250 with Stock configuration Cylinder Head with 4-barrel square bore Carburetor Mounting with 1500 - 6500 RPM Range with Ford Small Block Windsor Engine 5.0L 1990, Intake Manifold by Edelbrock®. Performer RPMs are...
      50-state emissions street legalThe finest quality at a great price
      $245.29 - $488.36
    • (0 reviews)
      # 229350056
      Ford F-250 with Stock configuration Cylinder Head with 4-barrel square bore Carburetor Mounting with 1500 - 6500 RPM Range with Ford Small Block Windsor Engine 5.0L 1990, NASCAR Edition RPM Air-Gap Black Intake Manifold by...
      $433.25
    • (0 reviews)
      # 171825393
      Ford F-250 with 4-barrel square bore Carburetor Mounting with Idle - 5500 RPM Range with Ford Small Block Windsor Engine 5.8L 1990, Performer™ 351-W Intake Manifold by Edelbrock®. Performer manifolds are dual-plane, low-rise...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $273.81 - $511.48
    • (0 reviews)
      # 229420202
      Ford F-250 with Stock configuration Cylinder Head with Dual 4-barrel square bore Carburetor Mounting with 1500 - 6500 RPM Range with Ford Small Block Windsor Engine 5.0L 1990, Performer™ RPM Dual-Quad Air-Gap Intake Manifold by...
      50-state emissions street legalThe finest quality at a great price
      $382.66 - $503.65
    • (0 reviews)
      # 17605756
      Ford F-250 with Stock configuration Cylinder Head with Idle - 5500 RPM Range with Ford Small Block Windsor Engine 5.8L 1990, Performer™ Truck 5.8 Intake Manifold by Edelbrock®. Performer manifolds are dual-plane, low-rise intake...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $760.66
    • (0 reviews)
      # 17623924
      Ford F-250 with Stock configuration Cylinder Head with Idle - 5500 RPM Range with Ford Small Block Windsor Engine 5.0L 1990, Performer™ Truck Intake Manifold by Edelbrock®. Performer manifolds are dual-plane, low-rise intake...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $790.53
    • (0 reviews)
      # 17612176
      Ford F-250 with 1500 - 6500 RPM Range with Ford Small Block Windsor Engine 1990, RPM Air-Gap Dual-Quad Intake Manifold and Carburetor Kit by Edelbrock®. Designed utilizing the latest technology, this product by Edelbrock features...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $1,321.13 - $1,655.54
    • (0 reviews)
      # 17642397
      Ford F-250 with Stock configuration Cylinder Head with 4-barrel square bore Carburetor Mounting with 1500 - 6500 RPM Range with Ford Small Block Windsor Engine 5.0L 1990, RPM Air Gap™ 302 Intake Manifold by Edelbrock®.
      $328.62 - $587.96
    • (0 reviews)
      # 17642422
      Ford F-250 with Windsor Cylinder Head with 4-barrel square bore Carburetor Mounting with 1500 - 6500 RPM Range with Ford Small Block Windsor Engine 5.8L 1990, RPM Air Gap™ 351-W Intake Manifold by Edelbrock®.
      $326.81 - $588.04
    • (0 reviews)
      # 171824442
      Ford F-250 with Stock configuration Cylinder Head with Dual 4-barrel square bore Carburetor Mounting with 1500 - 6500 RPM Range with Ford Small Block Windsor Engine 5.8L 1990, RPM Air Gap™ Dual-Quad Intake Manifold by Edelbrock®....
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $381.73 - $519.40
    • (0 reviews)
      # 17607019
      Ford F-250 with Windsor Cylinder Head with Thunder Series AVS Carburetor with 1500 - 6500 RPM Range with Ford Small Block Windsor Engine 5.8L 1990, Single-Quad Intake Manifold and Carburetor Kit by Edelbrock®. Designed utilizing...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $823.38 - $1,111.48
    • (0 reviews)
      # 229420221
      Ford F-250 with Stock configuration Cylinder Head with 4500 - 9000 RPM Range with Ford Small Block Windsor Engine 5.0L 1990, Super Victor™ 8.2 EFI Intake Manifold by Edelbrock®. Manifold Deck Height: 8.2". Designed utilizing the...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $466.02 - $785.09
    • (0 reviews)
      # 229350053
      Ford F-250 with Windsor Cylinder Head with 4-barrel square bore Carburetor Mounting with 4500 - 8500 RPM Range with Ford Small Block Windsor Engine 5.0L 1990, Super Victor™ 8.2 Intake Manifold by Edelbrock®. Manifold Deck Height:...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $411.00
    • (0 reviews)
      # 229350079
      Ford F-250 with Stock configuration Cylinder Head with 4-barrel square bore Carburetor Mounting with 5000 - 9000 RPM Range with Ford Small Block Windsor Engine 5.8L 1990, Super Victor™ 8.7 Intake Manifold by Edelbrock®. Manifold...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $478.13
    • (0 reviews)
      # 229350078
      Ford F-250 with Windsor Cylinder Head with 4-barrel square bore Carburetor Mounting with 4500 - 8500 RPM Range with Ford Small Block Windsor Engine 5.8L 1990, Super Victor™ 9.2 Intake Manifold by Edelbrock®. Manifold Deck Height:...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $478.51
    • (0 reviews)
      # 229401715
      Ford F-250 with Stock configuration Cylinder Head with 4500 - 8500 RPM Range with Ford Small Block Windsor Engine 5.8L 1990, Super Victor™ 351-W EFI Intake Manifold by Edelbrock®. Manifold Deck Height: 9.5". Designed utilizing...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $427.21 - $701.02
    • (0 reviews)
      # 229401731
      Ford F-250 with Windsor Cylinder Head with 4-barrel square bore Carburetor Mounting with 4500 - 8500 RPM Range with Ford Small Block Windsor Engine 5.8L 1990, Super Victor™ 351-W Intake Manifold by Edelbrock®. Manifold Deck...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $379.77 - $663.67
    • (0 reviews)
      # 171822041
      Ford F-250 with Stock configuration Cylinder Head with 4-barrel square bore Carburetor Mounting with 2500 - 6500 RPM Range with Ford Small Block Windsor Engine 5.0L 1990, Torker II 302 Intake Manifold by Edelbrock®. Designed...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $271.40 - $499.56
    • (0 reviews)
      # 229401734
      Ford F-250 with Windsor Cylinder Head with 4-barrel square bore Carburetor Mounting with 2500 - 6500 RPM Range with Ford Small Block Windsor Engine 5.8L 1990, Torker II 351-W Intake Manifold by Edelbrock®. Designed utilizing the...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $290.01 - $538.41
    • (0 reviews)
      # 229350081
      Ford F-250 with Yates C3 Cylinder Head with 4-barrel square bore Carburetor Mounting with 5500 - 9000 RPM Range with Ford Small Block Windsor Engine 5.8L 1990, Victor 351-Y Intake Manifold by Edelbrock®. Designed utilizing the...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $332.52
    • (0 reviews)
      # 229350080
      Ford F-250 with Yates C3 Cylinder Head with 4-barrel square bore Carburetor Mounting with 5500 - 9000 RPM Range 5.8L 1990, Victor 351Y-2 Intake Manifold by Edelbrock®. Designed utilizing the latest technology, this product by...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $445.24
    • (0 reviews)
      # 229401749
      Ford F-250 with Ford D-3 Cylinder Head with 4-barrel square bore Carburetor Mounting with 6000 - 9500 RPM Range with Ford Small Block Windsor Engine 1990, Victor D-3 Satin Intake Manifold by Edelbrock®. Manifold Finish: Satin....
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $618.50 - $678.63
    • (0 reviews)
      # 229420247
      Ford F-250 with Stock configuration Cylinder Head with 4-barrel square bore Carburetor Mounting with 3500 - 8000 RPM Range with Ford Small Block Windsor Engine 5.0L 1990, Victor Jr.™ 302 Intake Manifold by Edelbrock®. Designed...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $330.54 - $590.68
    • (0 reviews)
      # 229401766
      Ford F-250 with Windsor Cylinder Head with 4-barrel square bore Carburetor Mounting with 3500 - 7500 RPM Range with Ford Small Block Windsor Engine 5.8L 1990, Victor Jr.™ 351-W Intake Manifold by Edelbrock®. Designed utilizing...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $374.32 - $662.65
    • (0 reviews)
      # 229350054
      Ford F-250 with Stock configuration Cylinder Head with 2-barrel Carburetor Mounting with Idle - 5500 RPM Range with Ford Small Block Windsor Engine 5.0L 1990, Vintage™ Intake Manifold by Edelbrock®. Designed utilizing the latest...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $428.03
    • (0 reviews)
      # 229350052
      Ford F-250 with Stock configuration Cylinder Head with 94 Carburetor Model with Idle - 5500 RPM Range with Ford Small Block Windsor Engine 5.0L 1990, Vintage™ Intake Manifold and Carburetor Kit by Edelbrock®. Designed utilizing...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $2,175.71
    • (0 reviews)
      # 228300382
      Ford F-250 with 1500-6500 RPM Range with Emission Control System 5.0L 1990, Crosswind™ Intake Manifold by Professional Products®.
      $260.89 - $314.43
    • (0 reviews)
      # 97303601
      Ford F-250 with 1500-6500 RPM Range 1990, Typhoon™ Intake Manifold by Professional Products®.
      $156.93 - $296.55
    • (0 reviews)
      # 245815749
      Ford F-250 5.0L 1990, Air RAM Series Intake Manifold by Weiand®. Designed for the 5.0L Ford and LS series families, this intake pick up where the factory left off. Engineered to build horsepower and torque through optimized plenum...
      Low Rise Dual Plane Design builds maximum torque for street performance enginesSquare Bore Carburetor Mounting Flange
      $165.95 - $219.95
    • (0 reviews)
      # 120652139
      Ford F-250 with Small Block Engine 5.0L 1990, Hi-Ram Intake Manifold by Weiand®. Hi-RAM Series Intake Manifold used primarily in drag racing, tractor/truck pulls and performance marine applications where high RPM is required. The...
      $374.95
    • (0 reviews)
      # 64867106
      Ford F-250 7.5L 1990, Hi-Ram Intake Manifold Top by Weiand®.
      $249.95
    • (0 reviews)
      # 120652155
      Ford F-250 with Small Block Engine 5.0L 1990, Stealth Series Satin Intake Manifold by Weiand®. Manifold Finish: Satin. WEIAND’s top-of-the-line high-rise dual plane manifold combines the low-end throttle response of a 180°...
      Port Size: 1.83” height 1.02" widthHeight: Front 4.35", Rear 5.59"
      $190.95
    • (0 reviews)
      # 64865964
      Ford F-250 5.0L 1990, X-CELerator Series Intake Manifold by Weiand®. 360°, single-plane, open plenum manifold designed primarily for high-performance street, drag, marine and oval track use. This series works best with a higher...
      Single PlaneSquare Carburetor Mounting Flange
      $243.95
    • (0 reviews)
      # 162647696
      Ford F-250 1990, Power-Plus Series™ Throttle Body by BBK®. Increase airflow and add 15-20 horsepower at the rear wheels by bolting on this high-flow throttle body. It's a direct replacement for your factory throttle body and...
      Designed to increase airflow and improve horsepower15-20 dyno proven horsepower increase at the rear wheels depending on vehicle and application
      $199.99 - $349.99
    • (0 reviews)
      # 17632967
      Ford F-250 5.0L 1990, Pro-Flo™ XT Throttle Body by Edelbrock®. Length: 90mm. Standard 5.0 Mount Bolt Pattern. They are cast, fully machined, and assembled by Edelbrock using all new components including a pre-set TPS and an idle...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $412.29 - $429.66
    • (0 reviews)
      # 229401921
      Ford F-250 with Ford Small Block Windsor Engine 5.0L 1990, Intake Manifold Spacer Kit by Edelbrock®. Material: Fiber Laminate. Designed utilizing the latest technology, this product by Edelbrock features premium quality and will...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $86.13 - $130.19
    • (0 reviews)
      # 17623925
      Ford F-250 with Ford Small Block Windsor Engine 5.0L 1990, Performer™ Intake Manifold Cover by Edelbrock®.
      $85.51
    • (0 reviews)
      # 97296743
      Ford F-250 5.0L / 5.8L 1990, Typhoon™ Intake Manifold Spacer by Professional Products®. Designed utilizing the latest technology, this product by Professional Products features premium quality and will perform better than...
      Typhoon™ Phenolic SpacerIsolates Engine Heat From Manifolds
      $79.59
    • (0 reviews)
      # 120699739
      Ford F-250 1990, Hi-Ram Series Intake Manifold Runner Section by Weiand®.
      $298.95 - $330.95
    • (0 reviews)
      # 245824247
      Ford F-250 1990, Bar Sensor Kit by Fast®. Making the change from carburetion to electronic fuel injection (EFI) can be intimidating. Just understanding how many components are required to make the change can be challenging enough,...
      High quality at an affordable priceExpertly made from premium materials
      $105.53 - $241.84




    Guides & Articles

    • Performance Air Intake Systems
      Can an Air Intake System also Increase My Fuel Economy?
      We all know that achieving better fuel economy while driving puts money back in your pocket and does the environment a favor. But for those who are actively interested in squeezing the most out of every drop of gas, getting more miles per gallon can actually become a sport - especially if a vehicle has a manual transmission that can be upshifted earlier and put into neutral during downhill grades or when coasting to a stop sign.
      December 11, 2015
    • Performance Air Intake Systems
      The Real Cost of Your Car’s Cheap Factory Air Filter
      In today's world, saving money wherever possible has become essential. But it's important not to lose sight of the fact that, sometimes, a product that costs more up front will save you more money over time. In our business, we've seen far too many consumers judge products solely on the basis of their initial cost, completely neglecting any long-term economy and benefits. When it comes to automobiles, "performance" air filters are a perfect example of this.
      December 03, 2015
    • Performance Air Intake Systems
      My Car is Brand New | Why Should I Change My Air Intake System?
      Aftermarket air intake systems have become one of the most popular engine modifications available for late model cars and trucks. An easy question to ask is why are these so popular? After all, didn't engineers who work for your vehicle manufacturer spend years developing the best engine components available? Since power and fuel economy are major selling points these days, it's hard to imagine car companies not doing everything they can to maximize horsepower, miles per gallon, or both.
      November 20, 2015
    • Performance Air Intake Systems
      What are the Different Types of Air Intake Systems?
      There are many types of aftermarket air intake systems that range from simple and inexpensive to elaborate. In the scope of this article, we'll examine the different types of air intakes, what they do, and look at a few specific product examples of each. But in short, performance air intake setups increase airflow into your engine - boosting combustion and creating more horsepower and torque that you can actually feel. Their relatively low cost and easy installation (bolt-on in most cases) keeps them in popular demand by car enthusiasts that own everything from 1.5-liter turbo motors to big block V8 engines.
      November 19, 2015
    • Replacement Air Intake Parts
      Why Does My Car Have a Plastic Intake Manifold?
      An intake manifold is an integrated assembly that sits atop the engine, consisting of a series of tubes which distribute fresh outside air to each and every cylinder. On V-shaped engine blocks, an intake manifold typically sits between the two cylinder banks while inline engines may feature a manifold to the side of the cylinder head. Intake manifolds serve as a mounting point for carburetors, throttle body assemblies, fuel injectors, thermostats, and more depending on vehicle manufacturer engineering preferences. Intake manifolds may also serve to route coolant through dedicated channels in order to remove heat from the engine. Because of their location and functionality, intake manifold assemblies are under constant stress from engine vacuum pressure as well as direct heat from coolant, cylinder combustion gasses, and the cylinder heads to which they are mounted.
      July 30, 2014

    Popular Products

    1990 Ford F-250 Performance Air Intake Systems Reviews

    Average rating:  4.5  4.5 - 26 reviews
    5 of 5
    Fast Service
    Parts were as expected and delivery was fast.
    DPosted by David (Clio, MI) / April 23, 2016
    Was this review helpful for you? Yes
    View More
    Related 1990 Ford F-250 Pages
    1990 Ford F-250 Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.