BMW M3 1988, Standard Plain 1-Piece Brake Rotor by Zimmermann®. Quantity: 1 per Pack. As a manufacturer of safety parts Zimmermann is aware of brand's responsibilities and give precedence to product quality. All the brake discs and brake drums in brand's standard range of wearing parts are manufactured in dimensions and to a material quality specified by the automotive manufacturers. Zimmermann develops own technical solutions for brake discs which are patent protected by the manufacturer. Therefore Zimmermann supplies the aftermarket with an entire product range. Brake discs which are constructed differently to the original discs are certificated.
|Rotor Design: Rotors Only|
|Rotor Construction: 1-Piece|
|Rotor Style: Plain|
|Quantity: 1 per Pack|
- Extensive product range with over 1,000 different customer references
- Equivalent spare parts as defined by motor vehicle block exemption regulation KFZ-GVO (EU) 330/2010
- Consistently high product quality
- Reliable delivery service guaranteed by keeping adequate levels of stock
- Ongoing development and expansion of range
- Over 50 years experience in brake disc manufacturing and development
Brake discs and brake drums are made out of unmachined castings containing flake graphite (grey cast iron). The configuration of the cast iron is based on the one of the vehicle manufacturer for brake discs. Different ingredients are added on the basic material, in order to influence positively the properties of cast iron for durability and machining. Supplements in the iron alloy like e.g. copper, molybdenum, titanium and carbon are analyzed in the OE discs and are also used for the Zimmermann discs. Therefore cast material for each individual brake disc of Zimmermann matches with the OE parts.
Over the last few years, an increasing number of brake discs, which are not identical to the respective original part in terms of their design and function, have been sold on the market. Tests have revealed, that basic material specifications in particular, but also changes to tolerances result in deformations and increased cracking of brake discs. Otto Zimmermann GmbH has been performing inertia dynamometer tests and driving tests together with TÜV NORD Mobilität GmbH & Co. KG on an ongoing basis for more than 10 years, at great financial cost. On the basis of these tests, we are able to offer the free spare parts market qualitatively equivalent spare parts.
Zimmermann brake discs are "spare parts of the same quality" as original brake discs. The third-country brake discs tested by TÜV NORD do not fulfill this demand. In all the brake discs tested, third-country products break considerably more quickly. The Zimmermann brake disc and the original product therefore have a significantly longer life expectancy. The thermo-mechanical deformation is identical for the Zimmermann brake disc and the original brake disc. The third-country brake disc falls significantly below this level with respect to nearly all the criteria tested.
For more than five decades, Otto Zimmermann has been developing, producing and selling sophisticated vehicle components for car manufacturers and the free spare parts market. Zimmermann discs have already proven their reliability and performance in the first vehicles that were standardly equipped with disc brakes. Since its landmark relocation from Eppingen to Sinsheim in 1990 Otto Zimmermann GmbH has been systematically expanding its administrative premises, production facilities and warehousing space to over 17.000 square meters. The trademark Zimmermann® represents competence in brake parts– for your safety.