Volkswagen Scirocco 1987-1988, Sport Brake Coat Z Drilled 1-Piece Brake Rotor by Zimmermann®. The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimised by combining high-quality cast materials with a perforated braking surface. With over 500 different customer references this range covers virtually the entire vehicle population. Since 2008 Zimmermann is offering almost Brake Discs in a coated version named "Coat Z – anti corrosion". Today almost all brake discs and some brake drums are available in coated quality. Herewith we follow the demand for a more attractive visual appearance.
|Driving Style: Performance / Racing|
|Rotor Design: Rotors Only|
|Rotor Construction: 1-Piece|
|Rotor Style: Drilled|
|Rotor Finish: Coated|
|Quantity: 1 Per Pack|
- Better wet braking performance by permanent expulsion of brake dust and water
- Sporty look
- Because of the anti-corrosion protection Coat Z better finish - especially of the hub and the outer diameter
- Noticeable improvement in the braking power of your car
- Prevention of brake fade
- Countersinking of holes doubles up as wear indicator
- Not subject to registration: general ABE certification supplied with disc
- No formation of rust at the hub and herewith improved visual appearance
- Immediate functional capability without removal of the coating before mounting
- Constantly widened production range
- German production meeting the requirements of actual Quality Management Systems
- Well-known, highest Zimmermann-Product-Quality
Zimmermann company is managed on the basis of a quality management system conforming to the requirements specified by DIN EN ISO 9001 and ISO TS 16949 and with due regard for - and compliance with - the terms stipulated in contractually applicable rules and regulations. This can be realised by the usage of best available raw material, best testing and measuring equipment, clearly defined working procedures and qualified stuff.
In addition most of Zimmermann brake parts program is approved with an ABE by the German Kraftfahrtbundesamt (KBA) meeting the requirements of §22 together with §20 of the German Road Traffic Licensing Regulations (StVZO). Essentially original Zimmermann products are equivalent-quality spare parts, as defined by motor vehicle block exemption regulation KFZ-GVO (EU) 330/2010, which are on a par with the respective original parts first fitted. The dimensioning and the materials used meet the respective specifications of the motor vehicle manufacturers.
Zimmermann above-mentioned Quality Management System according to DIN EN ISO 9001 as well as to ISO TS 16949 together with the approval ABE ensures an optimum in braking and therefore a safe driving of customers when using Zimmermann brake parts.
For more than five decades, Otto Zimmermann has been developing, producing and selling sophisticated vehicle components for car manufacturers and the free spare parts market. Zimmermann discs have already proven their reliability and performance in the first vehicles that were standardly equipped with disc brakes. Since its landmark relocation from Eppingen to Sinsheim in 1990 Otto Zimmermann GmbH has been systematically expanding its administrative premises, production facilities and warehousing space to over 17.000 square meters. The trademark Zimmermann® represents competence in brake parts – for your safety.