Mercedes 300SDL / 420SE / 420SEL / 500SEC / 500SEL / 560SEC / 560SEL 1987, Reflex Proportional Brake Control by CURT®. Compatible with anti-lock brakes and cruise control, operates 2-8 brakes, self leveling and simple push-button calibration. Automatically adjusts brake output when going up or down a hill. Mounting hardware included. Inertia-based brake control with mounting hardware Curt Inc. has everything you need to set up your car or truck to tow, starting with CURT hitches and accessories. Tow in comfort and safety with the proper gear, and make your life easier around the campsite or while traveling with CURT accessories.
Notes: Includes mounting hardware.
|Activation: Inertia accelerometer|
|Mount Angles: Various|
|Level Adjust: Auto|
|Warranty: Limited lifetime|
- Dual-axis, motion-sensing accelerometer for smooth stops
- Operates 2-8 trailer brakes at a time (1-4 axles)
- Self-leveling with simple push-button calibration
- Digital display shows power adjustments in 0.1 increments
- Adjustable power output allows use with multiple load sizes
- Automatically adjusts brake output when going up or down a hill
- Mounts at various angles, above or below the dash, to increase usability
- Compatible with anti-lock brakes and cruise control
- Equipped with a quick plug for fast, easy installation
- Backed by a limited lifetime warranty
- Made in USA
- (10) Gauge duplex wire
- (10) Gauge cross-linked wire
- 30-amp circuit breaker
- Ring terminals
- Butt connectors and cable ties
It takes a lot of power to stop a moving trailer, especially when that trailer is hauling a heavy load. On RVs, flatbeds, livestock trailers and many other oversize haulers, manufacturers typically install trailer brakes to assist the tow vehicle in bringing such a massive amount of weight to a halt. But it takes more than a good set of brakes to make quick, efficient stops. It takes precision and the right amount of control. The inertia-based Reflex™ brake controller is capable of handling up to four axles, or eight brakes, at a time and comes with a dual-axis accelerometer to precisely sense your vehicle''s motion and apply the appropriate amount of brake pressure. Reflex™ features a digital display for easy brake monitoring, an automatic power adjuster to adapt to inclines and easy calibration with just the push of a button. Reflex™ can be used with anti-lock brakes and cruise control and comes with a limited lifetime warranty. All CURT brake controls are designed to work with quick plugs so that they can readily plug into your vehicle''s original equipment socket. They also include a mounting bracket and hardware for easy installation. A brake controller should be mounted somewhere on the dash of your vehicle, and CURT recommend putting it below the steering wheel, either on the right or left side of the steering column. This way the control will not block your view when driving, but it will remain accessible and visible when adjustment is needed.
CURT® Manufacturing has been a leader and innovator in the trailering industry since 1993. CURT markets a broad range of trailer hitches, towing systems and related accessories. CURT is "The First Name in Towing Products" for automobile and truck hitches, as well as RV and commercial towing systems. Products are marketed through retailers, distributors, installers, and e-tailers across the U.S. and Canada. CURT employs almost 350 associates, primarily at its manufacturing and headquarters in Eau Claire, Wisconsin. CURT operates 10 regional warehouses, each carrying over 2,500 items and has been twice named a Wisconsin "Manufacturer of the Year".