1982 Oldsmobile Custom Cruiser Body Parts

Change Vehicle

Keeping up your vehicle’s appearance is a significant factor in pride of ownership and resale value. This is the reason why CARiD strives to make it as easy, comfortable and affordable as possible for you to keep your 1982 Oldsmobile Custom Cruiser in tip top shape. To save you time and money, we gathered 1982 Oldsmobile Custom Cruiser auto body parts of the highest quality at economical prices all under one roof. All the products on offer are made by leading manufacturers that stand behind their products, so you'll get nothing less than the highest possible quality and durability with each and every part purchased here.

Featured Products

Guides & Articles

  • Bumpers
    What is a Bumper Valance?
    Maybe you've heard the term "bumper valance", or "valance panel", but you're not quite sure what one is. When it comes to non-automotive applications, the dictionary defines a valance as a piece of material that hangs loosely from a bed, table, or shelf to conceal what's underneath for decorative purposes. So how does it relate to an automobile?
    November 08, 2016
  • Custom Hoods
    Hood Pins | Definitions, Selection, and Installation
    Hood pins are a great-looking style element that can be added easily to any vehicle. But did you know they actually serve an important purpose? These pins keep the hood buttoned down in the event the main latch should fail - preventing the hood panel from flying open at speed. This often happens after accidents, that's why many racetracks require hood pins to be fitted on competition cars.
    October 31, 2016
  • Fenders
    Replacement Fender Moldings & Trim | The Finishing Touch When Replacing a Fender
    Most cars and trucks, especially older ones, have so many exterior trim pieces that it's hard to know where to start when it comes to replacing worn and weathered bits that drag down an entire vehicle's appearance. In this article, we'll take a look at the moldings and trim pieces we carry for wheel well openings, fender flares, side marker lights, and quarter panels. When you consider these replacement fender moldings cost relatively little, are very easy to install, and look as good as originals did when they were new - you'll realize they offer a lot of bang for the buck.
    October 26, 2016
  • Replacement Hoods
    Hood Hinges & Springs | Replacing Your Hood's 'Weak Link'
    No matter what size your car or truck is, its hood is one of, if not the, largest, bulkiest, and heaviest body panels on it. Hoods are fastened to the body structure either near the windshield firewall or at the very front - using hinges and brackets designed to pivot and support the weight of the hood fully once it's opened.
    September 23, 2016
  • Bumpers
    How To Paint Your Replacement Plastic Bumper
    If you've decided to replace a damaged front or rear bumper cover with a new one, the good news is your vehicle really is going to look a whole lot better once it's installed. Of course, the areas of major damage will be gone and will no longer be a value-deflating eyesore. You'll also have a new piece that's free of the chips, dings, and even cracks you've been putting up with.
    August 11, 2016
  • Replacement Hoods
    Replacement Hoods: Easy Sheet Metal Work For The DIY Gal Or Guy
    The hood panel of your car or truck is an integral part of your vehicle, and one of the first things people see when they look at your car or truck. When a hood panel isn't 100% right, there's no hiding it. And if you've got a classic from your youth, you are not going to feel good about your ride when sheet metal is compromised - especially a hood panel. Unfortunately, it doesn't take much to damage a hood panel. Any vehicle that's seen a number of miles is bound to have some kind of wear and damage to its engine lid. Statistically, accidents are most likely to result in front-end vehicle damage where hood panels are crinkled beyond repair. Hits from the side can be just as damaging, because left or right fenders usually always push into the hood panel.
    July 13, 2016
  • Fenders
    Inner Fenders: Hidden Protection for Your Outer Sheetmetal
    Driving through winter snow, ice, and rain means your car or truck is exposed to highly corrosive winter road salt, like it or not. And if you have any trouble guessing which particular area of your vehicle is most subject to rust because of this, just think of the one place where slush builds up the most. The area where you literally have to kick big mounds of it loose. You guessed it - the wheel wells.
    July 12, 2016
  • Bumpers
    Chrome Bumpers: The Good Old Days When Bumpers Were Metal
    Throughout the history of the automobile, metal bumpers with chrome-plated finish have been used as much for visual expression as they have for function. Go to any classic car show, and you're bound to hear at least one conversation covering the subject of how chrome bumpers are closely tied to "the good old days", with any given style representing the beginning or end of any individual's golden era of choice. In this article, we'll take a brief look at the history of chrome bumpers, how government regulations affected designs, and why chrome bumpers ultimately faded away. We'll also touch on replacement chrome bumpers we offer in the Front Bumpers and Rear Bumpers sections of our website.
    May 20, 2016
  • Side Mirrors
    What You Need To Know When Ordering A Replacement Outside Mirror
    It's a dismaying feeling seeing side view mirror components damaged. Whether you know how the damage happened or not, you're faced with what might be an extensive, costly repair and the dreaded hassle of figuring out what replacement parts are necessary - or where to go for the repair. Maybe it’s only the glass that’s cracked, or perhaps the whole assembly is hanging loosely by a wire.
    October 01, 2015
  • Trunks
    Rear Ended? Find Your Trunk & Tailgate Sheet Metal Here
    Whether you've just walked around to see the rear of your car after an accident or you've removed interior trunk pieces and floor liners to get a look at the condition of body panels on an older vehicle, seeing compromised metal for the first time is a gut-wrenching feeling. The good news is that, unless damage to your vehicle means it is totaled, things can be repaired. Rotted panels can be cut out, new ones can be welded in, and pieces that are bent out of line can be replaced. Whether you're doing the work yourself or using a professional body shop, experts in the field all say the most important part of auto body repair is choosing quality replacement sheet metal pieces.
    March 18, 2015
  • Interior Parts
    Interior Parts Restore Your Passenger Compartment's Functions
    It's a great irony of vehicle ownership that while we're proud of our car's style, and want to show it off by washing and waxing it until it's gleaming, we can hardly see the outside of it while driving down the road. Instead, from behind the wheel, we've got hands and feet on all the various controls. In addition to the obvious ones (steering wheel and pedals), there are the buttons and knobs for the windows, mirrors, sound system, climate control, and so on. Over time, these items are subject to as much wear-and-tear as any other part. Sooner or later they will begin to look tattered, or stop functioning all together.
    February 26, 2015
  • Roofs
    Replacement Roof Panels Are a Worthy Restoration Investment
    So you went ahead and did it. You found, bought, and dragged home your dream car. Except that in its present condition, it more closely resembles a nightmare. It's nothing that some sweat equity (oh, and time and money) can't fix. At least you have the time to make a plan. Looking at the body, you see rust in the usual places: the quarter panels, door bottoms, and trunk floor. You're relieved at first to see that the tin worm has limited its appetite to the lower extremities.
    February 18, 2015
  • Auto Glass
    Replacement Auto Glass Ensures You Will See Clearly
    Car owners replace the glass in their vehicle for one of two reasons: the first reason is that the existing glass has broken. On modern cars with "safety glass", the glass is either a laminated sandwich of two pieces of glass with a sheet of plastic in the center, or the glass is tempered. All windshields on modern cars use laminated glass so that the glass remains in one piece should one's head be unfortunate enough to contact it. Side and rear glass are usually tempered so that if it shatters, it breaks into many small pieces without sharp edges.
    January 27, 2015
  • Quarter Panels
    What Is A Quarter Panel?
    Quarter panels are exterior metal body panels that define how the rear of your vehicle will look to the eye. Because rear quarter panels provide structural support, they are typically welded in place on vehicle assembly lines. Some quarter panels are one large piece that serves both as a rear fender and roof section while others seem to qualify more as rear fenders because they have no roof sections integrated. On a few makes and models, some rear quarter panels are available in partial sections.
    December 12, 2014
  • Doors
    Door Shells vs. Door Skins
    "Do I need a door skin or do I need a door shell?" That's one of the common questions asked when it comes to repairing dented or rusted doors. In this article, we'll define door skins and door shells, and we'll give you a general idea of the bodywork needed with each in order to help you make a more informed purchase.
    December 11, 2014
  • Rocker Panels + Floors
    Rocker Panels: What Are They And Where Are They?
    A rocker panel is a stamped steel piece that is an integral part of your car's body structure. Rocker panels are located along the sides of the vehicle between front and rear wheel well openings, just below the doors. In fact, you lift your feet over them every time you enter and exit your vehicle. Aside from roof supports, they are the only part of the frame connecting the front and rear of your vehicle. In this article, we'll discuss the role of rocker panels on your car, why they are more subject to corrosion, and best options for replacement rocker panels if that time has come.
    December 10, 2014
  • Doors
    Replacing Your Vehicle’s Interior Door Panels
    Interior door panels that are worn detract from your vehicle's looks, overall perceived condition, resale value, and most important - can detract from people's first impressions of you when others open a door to enter. Right or wrong, it happens. It's easy to cover worn carpeting with fitted floor mats, hide shredded seats with form-fitting seat covers, or conceal a cracked or faded dashboard with a dash cover. However, covering up bad interior door panels is another story.
    December 09, 2014
  • Chassis Frames & Body
    Replacing Your Jeep Body Tub
    When it comes to automotive restoration, experts in the field say you'll have better luck and spend the least amount of money when you start by finding the best example of the year and model you're interested in. Sound advice – however, finding a high-quality Jeep CJ5, CJ6, or CJ7 in original condition is not so easy to do. High-quality originals in stock condition are rare, and ones that are command extremely high prices due to a widespread and fanatical fan base. Jeep enthusiasts themselves uniformly agree it's harder than ever these days to find one that hasn't rusted into powder form, been chopped and modified the wrong way, or been bent badly during off-roading.
    December 02, 2014
  • Replacement Hoods
    How To Replace Hood Latch Cables And Hood Support Struts
    When your hood release lever becomes inoperable, you're literally in a catch-22 position. One of the parts that opens the hood has broken, but you can't open the hood to locate and replace it. If you find yourself in this unfortunate predicament, don't panic. In this article, we'll cover how to get that hood open, and we'll guide you in performing the necessary repairs. We'll also discuss replacing gas strut supports if your vehicle uses them under the hood, trunk lid, or tailgate.
    November 12, 2014
  • Fenders
    Replacement Fenders For Your Classic American Car
    Passion for restoring old cars has increased in recent years as growing numbers of enthusiasts look to revisit their youth by enjoying a classic they owned or dreamed of owning decades earlier. Many of us at CARiD are also involved in rebuilding cars that are special to us, and we understand the road to romantic nostalgia can be pretty bumpy at times. We've created this article to help with one of the trickier parts of restoration – finding replacement exterior sheet metal. Body panels such as fenders and quarter panels are subject to dents and corrosion during a lifetime of use – factors that can lead to nasty surprises for a new owner who discovers damage and rust lurking under a layer of makeup.
    October 15, 2014
  • Vertical Doors
    What are Lambo Doors and How Do They Work?
    Lambo or scissor doors are so called because instead of opening out like a traditional car door, they open upward, pivoting at the front of the door just behind the fender, just like the blade of a scissors. Since the kit is a bolt-on installation, with no permanent modifications required, it can always be removed and the vehicle returned to stock if desired.
    May 05, 2012

Popular Products

1982 Oldsmobile Custom Cruiser Body Parts Reviews

Average rating:  4.5  4.5 - 10 reviews
4.3 of 5
Mirror Cover Logo
The material logo cover fits neatly over existing design. Adds a sporty flare look. Is able to stay in place at high speeds yet some flapping at adjustable handle. Good quality and stays wrinkle free. Some what easy to install but needs tightening adjustment from time to time. Jon M.
JPosted by Jon (Kitchener, ON) / January 8, 2015
Was this review helpful for you? Yes
View More
SECURE SHOPPING

All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.