1971 Dodge Challenger Performance Headers

Change Vehicle
1 - 60 of 161 results
show:
sort by:
    • (0 reviews)
      # 64823564
      Dodge Challenger Manual Steering 1971, Long Tube Headers by Flowtech®. Collector Outlet Diameter: 3". Carb Compliant: No. Material: Mild Steel. FLOWTECH headers are precision engineered and leak tested to get maximum performance...
      Mandrel-formed Power Plenum collectors for low backpressureConstructed of .060 cold roll flash mild steel tubing
      $169.95 - $357.95
    • (0 reviews)
      # 231243431
      Dodge Challenger W/O Air Injection Pump 1971, Competition™ Header by Hooker®. Primary Tubing Diameter: 1.875". Collector Outlet Diameter: 3". Carb Compliant: No. Collector Length: 8". Series: Competition™. Hooker Competition...
      Mandrel-bent tubing for smooth exhaust flowLight weight & sturdy 16 gauge tubing
      $287.95 - $642.95
    • (0 reviews)
      # 231243494
      Dodge Challenger 1971, Super Competition™ Header by Hooker®. Carb Compliant: No. Series: Super Competition™. With Hooker Super Competition the objective has always been to make the maximum horsepower and to put it at the...
      Tuned-length primary tubes for maximum exhaust scavenging and velocityMandrel-bent tubing for smooth exhaust flow
      $509.95 - $951.95
    • (0 reviews)
      # 91033375
      Dodge Challenger 7.0L / 7.2L With Floor Shifter With A/C Without in California or states using California emission standards 1971, Steel SAP 4-Tube Full Length Header by Doug's Headers®. Port Shape: SAP. Collector: 3-1/2". Primary...
      Reduces backpressure and increases higher RPM horsepowerPrecision formed long transition collectors and long tube design
      $706.57
    • (0 reviews)
      # 231019459
      Dodge Challenger 6.3L / 7.0L / 7.2L Automatic Transmission 1971, Steel Metallic Ceramic Coated Full-Length Exhaust Header by Patriot Exhaust®. Header made from Steel. Full length and fenderwell headers provide the ultimate...
      Expertly crafted from premium materialsQuality design and workmanship
      $549.34
    • (0 reviews)
      # 231080703
      Dodge Challenger 5.2L / 5.6L / 5.9L with Small Block Chrysler Engine 1971, Tight Tuck Street Rod Headers by Patriot Exhaust®. Tight Tuck headers are the solution to many problems associated with engine swaps in modern street rods....
      Expertly crafted from premium materialsQuality design and workmanship
      $256.18 - $370.42
    • (0 reviews)
      # 97227643
      Dodge Challenger With Air Conditioning W/O Smog Injection or Injection Heads With Power Steering With Chrysler B/RB Engine With MOPAR "B" Body / With MOPAR "E" Body 5.2L / 5.6L / 5.9L / 6.3L / 7.0L / 7.2L 1971, Block Hugger Headers...
      Low profile designBuilt of High Quality Materials
      $212.84 - $498.54
    • (0 reviews)
      # 97208312
      Dodge Challenger With Air Conditioning W/O Smog Injection or Injection Heads With Power Steering With Chrysler B/RB Engine With MOPAR "B" Body / With MOPAR "E" Body 5.2L / 5.6L / 5.9L / 6.3L / 7.0L / 7.2L 1971, Elite Ultra-Duty Full...
      Made of High Quality MaterialsIdeal for Heavy Duty Applications
      $468.29
    • (0 reviews)
      # 97227630
      Dodge Challenger With Air Conditioning W/O Smog Injection or Injection Heads With Power Steering 5.2L / 5.6L / 5.9L / 6.3L / 7.0L / 7.2L 1971, Standard Duty Headers by Hedman Hedders®. 1 Pair. Includes: Bolts, Studs, Gaskets,...
      Made of High Quality MaterialsBuilt to Last
      $203.76 - $468.64
    • (0 reviews)
      # 266604149
      Dodge Challenger With Air Conditioning W/O Smog Injection or Injection Heads With Power Steering With Inline Port Pattern LA Engine With "C" Body / With MOPAR "B" Body / With MOPAR "E" Body 5.2L / 5.6L / 5.9L / 6.3L / 7.0L / 7.2L...
      Lowest Profile Header Collector AvailableMade of High Quality Materials
      $277.73 - $603.52
    • (0 reviews)
      # 221601962
      Dodge Challenger 1971, Performance Exhaust Header Gasket by JBA®. JBA is proud to offer accessories to aid in the fitment of your JBA exhaust product. This product is made of high-quality materials to serve you for years to come....
      JBA's premium header flange gaskets are made extra thick from a specially made formulated gasket materialTheir gaskets are rated up to 1100 F
      $41.06 - $42.27
    • (0 reviews)
      # 235907155
      Dodge Challenger R/T 1971, Accu Seal Pro Header Gaskets by SCE Gaskets®. 2 Pieces. Available for applications ranging from specialized racing engines to OEM replacement, SCE offers embossed copper (Pro Copper), high temperature...
      Perfect solution for racing and high-performance engine applicationsManufactured using advanced engineering and on-track testing
      $21.24
    • (0 reviews)
      # 235907161
      Dodge Challenger 1971, Pro Copper Embossed Header Gaskets by SCE Gaskets®. 2 Pieces. SCE Gaskets invented embossed copper exhaust gaskets and they are the most effective way to insure leak-free, re-usable performance on aftermarket...
      Perfect solution for racing and high-performance engine applicationsManufactured using advanced engineering and on-track testing
      $36.36 - $46.29
    • (0 reviews)
      # 231243391
      Dodge Challenger 1971, Aluminum Header Gasket Set by Flowtech®. Kit consists of (2) Header flange gaskets and (2) 3" collector gaskets Material: Aluminum. This product is made of high-quality materials to serve you for years to...
      Engineered for a precise, easy fitManufactured of P73 Ferroglass non-asbestos facing material for long life
      $10.29
    • (0 reviews)
      # 231243451
      Dodge Challenger 1971, Super Competition™ Header Gasket by Hooker®. 0.070" Thick Series: Super Competition™. Thickness: 0.07". Hooker's precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust...
      Precision fit for improved sealingSteel core provides superior adhesion
      $13.21
    • (0 reviews)
      # 231243569
      Dodge Challenger 1971, Ultra-Seal™ Exhaust Gasket Set by Mr. Gasket®. Series: Ultra-Seal™. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $23.08 - $34.64
    • (0 reviews)
      # 89548534
      Dodge Challenger 1971, Exhaust Header Gaskets by Taylor Cable®. Series: Seal-4-Good™. These extreme high-temperature gaskets are well-suited for highly-modified engines: turbocharged, supercharged, nitrous or fuel. This is a...
      Will survive 2000°F exhaust temperatures for extended periodsCarbon felt material on a stainless steel core
      $33.74
    • (0 reviews)
      # 89466843
      Dodge Challenger 5.2L / 5.6L / 5.9L 1971, Graph-Flex™ Exhaust Header Gasket by Taylor Cable®. Series: Graph-Flex™. These extreme high-temperature gaskets are well-suited for highly-modified engines: turbocharged, supercharged,...
      Malleable stainless steel metal coreGraphite composition sealing material for high heat applications
      $23.04
    • (0 reviews)
      # 231032290
      Dodge Challenger 6.3L / 7.2L 1971, Graph Flex Square Header Flange Gasket by Taylor Cable®. This products is an OEM and Performance company that was built on its founding heritage supported by a tradition of Legendary Quality....
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $23.04
    • (0 reviews)
      # 231080723
      Dodge Challenger 1971, HTR Collector Gasket by Taylor Cable®. Series: HTR. This products is an OEM and Performance company that was built on its founding heritage supported by a tradition of Legendary Quality. Designed utilizing...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $21.54
    • (0 reviews)
      # 89466845
      Dodge Challenger 5.2L / 5.6L / 5.9L 1971, XX Carbon™ Exhaust Header Gasket by Taylor Cable®. Series: XX Carbon™. These extreme high-temperature gaskets are well-suited for highly-modified engines: turbocharged, supercharged,...
      Malleable stainless steel metal coreGraphite composition sealing material for high heat applications
      $20.92
    • (0 reviews)
      # 231032316
      Dodge Challenger 6.3L / 7.2L 1971, XX Carbon™ Square Exhaust Header Gasket by Taylor Cable®. Series: XX Carbon™. This products is an OEM and Performance company that was built on its founding heritage supported by a tradition...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $20.92
    • (0 reviews)
      # 17606468
      Dodge Challenger 5.2L / 5.6L Small Block 1971, Exhaust Gasket Set by Edelbrock®. Port: 1.75"x1.25". Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. Edelbrock's...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $24.01
    • (0 reviews)
      # 231032286
      Dodge Challenger 5.2L / 5.6L / 5.9L 1971, MLS Exhaust Header Gasket by Cometic Gasket®. Thickness: 0.030".
      Made of High Quality MaterialsBuilt to Last
      $38.69
    • (0 reviews)
      # 207581270
      Dodge Challenger 1971, Seal-4-Good Header Gasket by Percy's High Performance®. The Percy's Seal-4-Good Reusable Flange Gaskets are multi-layered and made from a special "Dead Soft" Aluminum, which conforms to header flanges for the...
      Limited Lifetime Replacement WarrantyMade Of Dead Soft Aluminum
      $37.18
    • (0 reviews)
      # 69054626
      Dodge Challenger 6.3L / 7.2L 1971, XX Carbon Header Gasket by Percy's High Performance®. Port Style: Ractangular, Port Size: 1.75" x 1.5". These gaskets are designed to give the performance you expect at a price you can afford. Our...
      Perfect For Even Nitrous/Turbo/Blower MotorsWithstands Long Term Exposure To Over 2000 Degrees
      $26.70
    • (0 reviews)
      # 262496501
      Dodge Challenger 1971, Exhaust Header Gasket by Remflex®. Set of 2. Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees -...
      Remflex exhaust gaskets come in a standard 1/8" thickness and are designed to crush 50%. This allows them to fill gaps in the flange surface up to 1/16"100% flexible graphite construction means Remflex gaskets are good for up to 3,000 degrees F - far exceeding that of any vehicle's exhaust system temperature
      $29.29 - $35.19
    • (0 reviews)
      # 262496513
      Dodge Challenger 1971, Manifold/Header Gasket by Remflex®. Set of 2. Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees -...
      Remflex exhaust gaskets come in a standard 1/8" thickness and are designed to crush 50%. This allows them to fill gaps in the flange surface up to 1/16"100% flexible graphite construction means Remflex gaskets are good for up to 3,000 degrees F - far exceeding that of any vehicle's exhaust system temperature
      $29.29 - $34.39
    • (0 reviews)
      # 235907158
      Dodge Challenger 6.3L / 7.2L 1971, Pro Copper Embossed Exhaust Gaskets by SCE Gaskets®. 2 Pieces. SCE Gaskets invented embossed copper exhaust gaskets and they are the most effective way to insure leak-free, re-usable performance...
      Perfect solution for racing and high-performance engine applicationsManufactured using advanced engineering and on-track testing
      $36.36
    • (0 reviews)
      # 56801466
      Dodge Challenger With Mopar Small Block Engine 5.2L / 5.6L / 5.9L 1971, Round Port Exhaust Gasket by Schoenfeld Headers®. 1 Piece. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $13.34
    • (0 reviews)
      # 116549659
      Dodge Challenger 5.6L / 5.9L 1971, Exhaust Manifold Gasket Set by Magnum Gasket®. You'd better be ready to take the heat if you're going to seal an exhaust manifold, where temperatures can often exceed 1,000°F. You can count on...
      Made of High Quality MaterialsThe best combination of steel layers and high-temp gasket materials
      $13.09
    • (0 reviews)
      # 231243352
      Dodge Challenger 1971, Exhaust Header Copper Gasket by Big End Performance®. This Big End Performance product is just the option for you in case you want to get the most out of your auto. It is made from first-rate materials to...
      Designed to boost your vehicle's performanceMade from high-quality materials
      $34.08 - $40.28
    • (0 reviews)
      # 231243345
      Dodge Challenger 1971, Header Bolt Set by Mr. Gasket®. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black rams horn manifolds, you’ll need gaskets...
      $13.63 - $30.57
    • (0 reviews)
      # 231080738
      Dodge Challenger 1971, Vibe-Lock Header Bolt Kit by Taylor Cable®. This products is an OEM and Performance company that was built on its founding heritage supported by a tradition of Legendary Quality. Designed utilizing the latest...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $49.65 - $114.31
    • (0 reviews)
      # 94962211
      Dodge Challenger With Big Block Chrysler Engine 6.3L / 7.2L 1971, Header Bolts by Milodon®. 12 Pieces.
      Designed to boost your vehicle's performanceMade from high-quality materials
      $8.95
    • (0 reviews)
      # 91659863
      Dodge Challenger 1971, Standard Head Header Bolts by Trans-Dapt®. Standard header bolts, from Trans-Dapt Performance Have a 7/16" head size for use with headers. For even tighter fitting applications, use Trans-Dapt's Small head...
      Built to match your exact requirementsHigh quality you can rely on
      $5.38 - $7.50
    • (0 reviews)
      # 56806605
      Dodge Challenger 6.3L / 7.2L Big Block Chrysler 1971, Small Head Header Bolts by Trans-Dapt®. Set of 12. Miniature Head; 3/8"-16 x 3/4".Fastener made from Steel. Mini 3/8" head header bolts make installation and removal a breeze....
      Built to match your exact requirementsHigh quality you can rely on
      $5.55
    • (0 reviews)
      # 231019215
      Dodge Challenger 3.2L / 3.7L 1971, Cast Iron Natural Inline Exhaust Manifold by Dorman®. Includes: Exhaust Manifold, 2 Manifold Gasket and 1 Flange, 2 Studs, 2 Nuts, 1 Heat Riser Spring. Finish: Natural. Inlet Port Shape: Square....
      High Quality tubular construction protects against warping and/or crackingLeak-resistant for long-lasting performance
      $292.95
    • (0 reviews)
      # 24103546
      Dodge Challenger 1971, Exhaust Manifold Gasket by Victor Reinz®. Material: Composite. When you’re low on oil, coolant or some other fluid, you may be tempted to just run down to the local auto parts chain store. But before you...
      $13.97 - $15.55
    • (0 reviews)
      # 24046059
      Dodge Challenger 3.2L / 3.7L 1971, Intake and Exhaust Manifolds Combination Gasket by Victor Reinz®. When you’re low on oil, coolant or some other fluid, you may be tempted to just run down to the local auto parts chain store....
      $15.13
    • (0 reviews)
      # mpn358949929
      Universal Chrome Plated Lake Pipe by Patriot Exhaust®. 1 Pair. Includes: Muffler, Brackets. Side Pipe made from Steel. Chrome Lake Pipes 63". Finish: Chrome Plated. Show quality chrome Lake Pipe 4 kits connect to headers or stock...
      The look of an expensive tuned header side pipe at a fraction of the costSide pipes come with built-in six sided louvered cored mufflers which absorb sound not horsepower
      $339.21
    • (0 reviews)
      # 231014066
      Universal Aluminized Steel Header Collector Ball Flange Kit by Flowmaster®. Material: Aluminized Steel. The Collector Ball Flange takes the place of the messy three-bolt connections and ensures a leak-free and connection. The ball...
      Replaces Messy 3-Bolt Flange ConnectionEnsures Leak Free Connection
      $99.00
    • (1 review)
      # 231014034
      Universal Scavenger Series Y-Collector by Flowmaster®. Series: Scavenger Series. The patented Scavenger Y-Collector is based on the principles of Pulse Technology. They are designed to harmonize the exhaust pulses from two...
      Race Proven TechnologyPatented Design that Creates Low Pressure Zones for Better Scavenging
      $47.55 - $54.01
    • (0 reviews)
      # 231014205
      Universal Header Merge Collector by MagnaFlow®. These headers are a cost effective an easy way to boost your vehicle's horsepower and torque in almost nothing flat. They are made of mandrel bent stainless steel with a ceramic...
      Easy and a cost effective solution to add horsepower and torque to your enginePrecisely designed for quality, fit and function
      $265.16 - $333.13
    • (0 reviews)
      # mpn1295593899
      Universal 304 SS 2-Bolt Manifold Flange by Stainless Works®. Primary Tubing Diameter: 3.02". Material: 304 SS. This superior product is made from high-grade stainless steel to ensure excellent quality and maximum resistance to...
      Designed to meet strict quality standardsCarefully crafted from first-rate stainless steel
      $34.00
    • (0 reviews)
      # mpn584304642
      Universal Afterburner™ Thrust Toobs Headers Extension by Flowtech®. 3" Inlet, 12" Long, 3-Bolt, Package contains one pair Series: Afterburner™. Afterburner Thrust Toobs used with open headers are designed to complete the system...
      Expertly crafted from premium materials3-Bolt, 3” ID, 12” Long
      $38.44
    • (0 reviews)
      # 266461787
      Universal Reducer by Flowtech®. Flowtech understands that when you purchase a set of headers, a muffler, or even an entire exhaust system, you want to know that you’re getting everything you need to complete the installation.
      Expertly crafted from premium materialsDesigned to match rigorous quality standards
      $19.42 - $128.95
    • (0 reviews)
      # 231013939
      Universal High-Velocity Merge Collector by Dynatech®. 1 Piece. Dynatech Merge Collectors are an excellent way to maximize the potential of your exhaust system. When your exhaust system requires the maximum horsepower, a set of...
      Maximizes the potential of the exhaust systemMade of High Quality Materials
      $239.53 - $289.99
    • (0 reviews)
      # 231013907
      Universal High-flow Slip On Collector by Dynatech®. 1 Piece. Material: Mild Steel. Dynatech High-Flow Slip On Collectors are designed with maximum exhaust flow in mind. With a High-Flow long transition area, these collectors...
      Collectors come race-ready right out of the boxAvailable in a wide variety of primary tube and collector outlet sizes
      $89.99 - $149.99
    • (0 reviews)
      # 231013966
      Universal Long Tube Pavement Late Model Headers by Dynatech®. These Long Tube Pavement Late Model Headers are designed for use with Standard Chevy engines. The Long Tube design promotes excellent torque throughout the RPM range.
      35” Equal Length primaries for maximum Torque and HorsepowerValve covers are removable with headers installed
      $105.99 - $109.99
    • (0 reviews)
      # 231013881
      Universal Mild Steel 80 Degree Elbow by Dynatech®. 1 Piece. Finish: Natural. Material: Mild Steel. Specifically designed for use with Dynatech Dirt Late Model Headers. This is an excellent way to get the exhaust routed inside the...
      Delivers a huge boost in performance and an awesome soundRigorously dyno-tested to provide maximum horsepower and torque gains
      $27.99
    • (0 reviews)
      # 255773604
      Universal Collector Gaskets by JBA®. JBA is proud to offer accessories to aid in the fitment of your JBA exhaust product. This product is made of high-quality materials to serve you for years to come. Designed using...
      JBA's premium header flange gaskets are made extra thick from a specially made formulated gasket materialTheir gaskets are rated up to 1100 F
      $11.97 - $13.70
    • (0 reviews)
      # 231014256
      Universal 4-1 Formed Collectors by Patriot Exhaust®. This superior Patriot EXhaust product is just for you. Carefully designed for maximum performance, is will more than just meet your needs and expectations. This product is built...
      Expertly crafted from premium materialsQuality design and workmanship
      $36.51 - $64.99
    • (0 reviews)
      # 231014349
      Universal Collector Reducers by Patriot Exhaust®. Patriot Exhaust collector reducers are zinc plated to minimize corrosion while providing a weldable finish. All collector reducer kits come with two reducers, gaskets and flange...
      Available in a wide variety of diameters and lengthsZinc plated to minimize corrosion
      $25.04 - $30.69
    • (0 reviews)
      # mpn358950043
      Universal Dome Style Reducer by Patriot Exhaust®. Series: Dome Style. This superior Patriot EXhaust product is just for you. Carefully designed for maximum performance, is will more than just meet your needs and expectations. This...
      Expertly crafted from premium materialsQuality design and workmanship
      $24.91
    • (0 reviews)
      # 231014286
      Universal Exhaust Collector Flange Kit by Patriot Exhaust®. Flange kits include two flanges, gaskets and flange bolts. All round collector flanges include two block off plates and two flanges. 4-gauge flange thickness. Flange kits...
      Available in a variety of diametersWelding Required: Yes
      $12.58 - $16.87
    • (0 reviews)
      # 266461866
      Universal 2 into 1 Y-Pipe Collector by Schoenfeld Headers®. 1 Piece. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is designed with utmost care and...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $101.03 - $112.26
    • (0 reviews)
      # 266461864
      Universal 3 Bolt Header Collector Flange by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is designed with utmost care and meticulous...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $5.86 - $6.24
    • (0 reviews)
      # 266461865
      Universal Collector Insert Reducer by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is designed with utmost care and meticulous...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $20.77
    • (0 reviews)
      # 266461872
      Universal Slip Over Collector by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is designed with utmost care and meticulous attention...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $44.67 - $221.08




    1971 Dodge Challenger Performance Headers Reviews

    Average rating:  4.5  4.5 - 39 reviews
    5 of 5
    CanAmMex® 00747-212 - Thunderbolt™ Hi-Polished Single Rolled Angled Oval Tip
    These appear to be of very good quality, good welds.
    JPosted by John (Enfield, CT) / February 24, 2016
    Was this review helpful for you? Yes
    View More
    Related 1971 Dodge Challenger Pages
    1971 Dodge Challenger Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.