Fiat 125 1967, Venturer Time Delayed Brake Control with Time Based Activation by CURT®. Compatible with anti-lock brakes and cruise control, operates 2-6 brakes, no leveling required, adjustable power and ramp time. Mounting hardware included. Time-activated brake control with mounting hardware. Wiring adapter to connect OEM brake controller wiring on vehicle to electric brake controller. 2' wire, protective sleeve.
- Includes mounting hardware
- Drilling Required
|Activation: Time Based|
|Mount Angles: Any|
|Level Adjust: Auto|
|Warranty: Limited lifetime|
- Increases brake power based on gain setting and sensitivity adjustment
- Operates 2-6 trailer brakes at a time (1-3 axles)
- No internal moving parts and no leveling required
- LED indicator lengthens as controller applies power
- Mounts anywhere in the vehicle, at any angle
- Features adjustable power and ramp time
- Compatible with anti-lock brakes and cruise control
- Equipped with a quick plug for fast, easy installation
- Backed by a limited lifetime warranty
- (10) Gauge duplex wire
- (10) Gauge cross-linked wire
- 30-amp circuit breaker
- Ring terminals
- Butt connectors and cable ties
It takes a lot of power to stop a moving trailer, especially when that trailer is hauling a heavy load. On RVs, flatbeds, livestock trailers and many other oversize haulers, manufacturers typically install trailer brakes to assist the tow vehicle in bringing such a massive amount of weight to a halt. But it takes more than a good set of brakes to make quick, efficient stops. It takes precision and the right amount of control. The Venturer™ is a compact, easy-to-set-up time-based brake controller. It can be mounted at any angle and has an automatic power level adjustment feature. It can operate one to three axles at a time, meaning two to six brakes, and has an LED display for monitoring brake pressure. Venturer™ is compatible with anti-lock brakes, cruise control and comes with a limited lifetime warranty. All CURT brake controls are designed to work with quick plugs so that they can readily plug into your vehicle''s original equipment socket. They also include a mounting bracket and hardware for easy installation. A brake controller should be mounted somewhere on the dash of your vehicle, and we recommend putting it below the steering wheel, either on the right or left side of the steering column. This way the control will not block your view when driving, but it will remain accessible and visible when adjustment is needed.
CURT® Manufacturing has been a leader and innovator in the trailering industry since 1993. CURT markets a broad range of trailer hitches, towing systems and related accessories. CURT is "The First Name in Towing Products" for automobile and truck hitches, as well as RV and commercial towing systems. Products are marketed through retailers, distributors, installers, and e-tailers across the U.S. and Canada. CURT employs almost 350 associates, primarily at its manufacturing and headquarters in Eau Claire, Wisconsin. CURT operates 10 regional warehouses, each carrying over 2,500 items and has been twice named a Wisconsin "Manufacturer of the Year".