Chevy Corvette Without Telescopic Steering Column 1967, Billet Style Steering Wheel Installation Kit by Grant®. Grant Billet Style Installation Kits are an optional styling upgrade. The Billet Style Kits have Grant's five-hole mounting pattern and can only be used to install Grant Signature Series Steering Wheels. When these are used it eliminates the need for the GT Styling Sleeve part number 4000 and you also do not need a standard installation kit either. The cool thing about the Billet Kits is they are designed to put the wheel back in as close to the stock position as possible. You cannot use this kit to install a Classic/Challenger/Performance Series Wheel (3 Bolt Pattern wheels) or to mount the #2001 Vehicle Security System. Optional Banjo Installation Kit. Use to install Banjo wheels only. Features a chromed steel skirt with a streamlined shape to complement the Banjo series wheels.
Notes: Not recommended for use on vehicles originally equipped with airbags or Radio Controls/Cruise Controls Mounted on Steering Wheel.
- Has Grant’s five-hole mounting pattern
- Each installation kit is custom designed to fit your vehicle make and model
- Also designed specifically for your custom steering wheel
- Required for mounting Grant® steering wheels
- Contains sturdy, durable spring for keeping horn plate separated from contact area
Grant steering wheel installation kits take the pain out of installing your new custom steering wheel on your vehicle. Easy-to-follow instructions lead you step by step through the process of hooking up the replacement die-cast hub, hardware, and horn wiring. Should you decide to swap a different style of steering wheel onto your installation kit at a later point, adapters and other accessories are available from Grant to make that possible. Should you have any questions on the Grant Installation Kits we sell, our specialists are available 7 days a week to help answer them.
You’ll find the installation instructions very thorough and helpful, and they will guide you through the minor adjustments and fine-tuning that can sometime be necessary. For example, if there’s either a large gap or rubbing (interference) between the post cover steering column, Grant kits are built to allow for a 1/8" gap between the post cover and the steering column. If needed, instructions will guide you through adjusting steering column sections for a perfect fit. If your new Grant Steering Wheel is too close to the turn signal, wiper, or shift levers, Grant® offers an extension piece that mounts between your installation kit and steering wheel to allow two extra inches of clearance. And if you find your newly installed custom steering wheel protrudes too far back towards your chest, wheel placement can be revised with an available 1-inch spacer that replaces the standard 2-inch piece.
Since 1922, Grant® Products has been a leader in the field of automotive products. After getting its start with engine overhaul kits and parts, Grant became involved in automotive racing and supplied many engine components that set records on the salt flats of Bonneville and on the pavement of the Indianapolis Speedway. Grant diversified into steering wheels for race cars in the 1960s and pioneered many advancements using woods and plastics in construction. After introducing tilt-wheel conversion kits and street-legal quick release steering wheel kits for theft prevention, the company became so successful with their steering wheel line they opted to focus solely on it. Today, Grant Products produces a wide range of modern and retro style steering wheels for boats, heavy trucks, ATVs, golf carts as well as passenger cars. When a well-made, stylish custom steering wheel is what you want, Grant is the only name you need to know.