1964 Ford Mustang Performance Parts

Change Vehicle
Show items:
Sort by:
    • (0 reviews)
      # 1002093470
      Ford Mustang 1964, Street Series™ Stainless Steel Crossmember-Back Exhaust System with Split Rear Exit by MagnaFlow®. Exhaust Type: Crossmember-Back. Exhaust Tubing Material: Stainless Steel. Exhaust System Sound: Moderate. MagnaFlow...
      $630.34 - $776.68
    • (0 reviews)
      # 838040866
      Ford Mustang 1964, Rallye Series Drilled and Slotted Front Brake Conversion Kit by Master Power Brakes®. If nothing less than absolute quality will do, it does not get any better than this first-rate Master Power Brakes product. It is...
      $995.00 - $1,379.00
    • (0 reviews)
      # 12527454
      Ford Mustang Base To Chassis # 8D*X 199999 1964, Anti-Sway Bar Kit by ST Suspensions®. Boost the handling of your vehicle to more sophisticated levels with premium, one-piece front and rear solid steel sway bars from ST Suspensions....
      Effectively decreases suspension lean and side-to-side body roll around turnsSway bars are crafted from cold-rolled solid steel for consistent thickness, yield strength, and lighter weight
      $169.99 - $348.48
    • (0 reviews)
      # 171844017
      Ford Mustang 4.3L / 4.7L with Stock configuration Cylinder Head with Dual 4-barrel square bore Carburetor Mounting with Ford Small Block Windsor Engine 1964, Dual-Quad Intake Manifold by Edelbrock®. Dual-Quad Intake Manifold by...
      Fabled high-performance appearanceImproved air and fuel flow
      $384.95 - $668.95
    • (0 reviews)
      # 1059952158
      Ford Mustang Base 4.7L 1964, 177 Blower Supercharger Kit by Weiand®. Weiand Pro-Street superchargers represent a significant leap in technology for obtaining substantial performance gains, while maintaining drive ability and reliability.
      Low ProfileOffset Ford Nose Style
      $2,949.95 - $3,349.95
    • (0 reviews)
      # 86917989
      Ford Mustang Base 1964, Direct Fit Radiator with Fan by Flex-a-Lite®. Size: 19 5/8" x 20 5/8" x 3 3/4". Inlet Location: Upper Passenger Side. Fan Quantity: Single. Fan Diameter: 15". Number of Blades: 8. Amperage Draw: 19.5. Fuse...
      Makes for efficient heat transferPatented Flex-a-fit sidetank design
      $1,073.33
    • (0 reviews)
      # mpn3767291469
      Ford Mustang Base 4.3L / 4.7L Standard Transmission with Internal Balanced Flywheel 1964, Performance Steel Flywheel by Hays®. Flywheel Tooth Number: 157. Product Weight: 24 lbs. This Hays flywheel is a flywheel designed for use with an...
      Expertly crafted from premium materialsDesigned to match rigorous quality standards
      $308.95
    • (0 reviews)
      # mpn3615159101
      Ford Mustang 1964, Silver EFI Fuel Tank System by Sniper®. Fuel System Type: Gasoline. Emission Code: 3. Fuel Sending Unit: 73-10 Ohms. Gallon Capacity: 16. Holley and Sniper will help you to complete your EFI swap with our new EFI...
      Tanks are coated galvanized steel then powder coated silver for total corrosion protection255 lph fuel pump with hanger assembly gives you the fuel you need with in-tank quietness
      $566.95
    • (0 reviews)
      # mpn1442972
      Ford Mustang 1964, Blaster 2™ Ignition Coil by MSD®. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil line is the right choice. Our...
      Performance upgrade for canister style coilsHigh voltage and energy output
      $51.39
    • (0 reviews)
      # mpn358587151
      Ford Mustang Base 1964, Power Conversion Column Steering Shaft by Borgeson®. Quantity: 1 per Pack. If you want to improve your vehicle's steering, go with this quality product by Borgeson. To provide you with the most durable and...
      Collapsible: NoLength (in): 31.125"
      $53.87
    • (0 reviews)
      # mpn2095625976
      Ford Mustang 4.7L 1964, Full Size OEM Style Starter by Tuff Stuff Performance®. Mounting: 2 Bolt Mount. Finish: Black.
      Offset MountHeat Treated Shaft
      $116.60
    • (0 reviews)
      # 585721965
      Ford Mustang with Ford 8" Series Axle with 1.5" Brakes 1964, Rear Axle Shaft Kit by Yukon Gear & Axle®. Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV...
      Enables you to keep your engine in the powerband for more giddy-up and high speedAllows for getting superior traction on just about any brutal terrain
      $197.84
    • (0 reviews)
      # mpn358497042
      Universal Micro Sprint Torrington Thrust Bearing by JOES Racing®. Keep your Micro turning smoothly with a Torrington Thrust Bearing from JOES. Place it between your spindle and axle, on the bottom side, to take the load and keep your...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $9.99
    • (0 reviews)
      # 111865925
      Ford Mustang 1964, Stainless Steel Oval Crate Exhaust Muffler by Borla®. Muffler Body Length: 14". Muffler Sound: Aggressive / Loud. Give your ride the sound it deserves! Premium-quality Crate Mufflers™ tuned to optimize the sound and...
      $220.99 - $241.99
    • (0 reviews)
      # 838017825
      Ford Mustang 1964, Legend Series Plain Brake Conversion Kit by Master Power Brakes®. If nothing less than absolute quality will do, it does not get any better than this first-rate Master Power Brakes product. It is distinguished by an...
      $599.00 - $1,039.00
    • (0 reviews)
      # mpn1038197948
      Ford Mustang Hardtop 4.3L / 4.7L With Big Block Engine / With Small Block Engine 1964, Front Sway Bar by Eibach®. Quantity: 1 per Pack. This is a steel sway bar that reduces side-to-side body roll around turns, enhancing grip and...
      Depending on vehicle application, sway bar ends may or may not be available with multiple mounting holes to adjust the level of stiffnessSway bars are forged from one solid piece of steel for greater strength and have no welds
      $226.80
    • (0 reviews)
      # 17624122
      Ford Mustang 4.3L / 4.7L with Stock configuration Cylinder Head with 4-barrel square bore Carburetor Mounting with Ford Small Block Windsor Engine 1964, Performer™ Dual Plane Intake Manifold by Edelbrock®. This premium product is the...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      +1
      $216.95 - $451.95
    • (0 reviews)
      # mpn1600668541
      Ford Mustang C Engine VIN Character With Ford Small Block With Street/Strip Camshaft Usage 1964, Performer RPM Hydraulic Flat Tappet Camshaft and Lifter Kit by Edelbrock®. Designed for street high-performance applications, Performer RPM...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $260.95
    • (3 reviews)
      # 723895272
      Ford Mustang 1964, Thermocap™ Radiator Cap by Mr. Gasket®. OEM Replacement. With Thermometer Built In. 16 PSI. Keeping your engine cool is pretty important, so Mr. Gasket has a full line of cooling system accessories. Whether it’s a...
      Brilliant triple-chrome platingPrevent boilovers
      +1
      $32.43 - $37.53
    • (0 reviews)
      # mpn358591516
      Ford Mustang 4.7L Automatic Transmission with Small Block Ford Engine 1964, Machined Flexplate by TCI®. A new flexplate from TCI provides a bolt-on upgrade over the stock component. It is a must converters. The SFI 29.1-approved, TCI...
      Constructed from a high tensile strength materialResists elongation and cracking
      $288.54
    • (0 reviews)
      # mpn2266799109
      Ford Mustang A / D / K Engine VIN Character 1964, Street Avenger 4BBL Carburetor by Holley®. Street Avenger carburetors are known to bolt on right out of the box and have great features such as a quick change vacuum secondary for easy...
      Vibratory polished for good looksOptimized street calibration that works-out-of-the-box
      $469.95
    • (0 reviews)
      # mpn2831865717
      Ford Mustang 4.7L 1964, Ready To Run Distributor by MSD®. Easy as 1,2,3… The MSD Black Ready-to-Run distributor line makes adding big ignition power and stealthy good looks to your a snap. With no ignition box needed, connect 3 wires...
      Simple and clean installation with only three wires to connectSupplied with an HEI style distributor cap and rotor (accepts Cap-A-Dapts)
      $429.95
    • (0 reviews)
      # 157515975
      Ford Mustang 1964, Tie Rod Dust Boots by Prothane®. Quantity: 2 per Pack. If you are looking to upgrade the steering system of your vehicle to make the most out of your vehicle’s performance, go with this high-grade steering part that...
      High quality at an affordable priceExpertly made from premium materials
      $5.69 - $5.91
    • (0 reviews)
      # 1120478034
      Ford Mustang 4.7L 1964, Gear Reduction Starter by Tuff Stuff Performance®. Tuff Stuff starters are hand made from premium quality new components - not remanufactured - and are quality built in USA. Most Gear Reduction style starters,...
      Designed For High Horsepower And High Compression EnginesLighter And Smaller Than OE Starters
      $168.12 - $258.86
    • (0 reviews)
      # mpn2741038127
      Ford Mustang C4 Transmission 1964, Excel™ Slip Yoke by Richmond®. Pick out rock-proof Yokes and components designed to provide unbridled strength and durability to handle the high levels of power and torque coming from your modified...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $77.05
    • (0 reviews)
      # mpn358580212
      Universal 110 Volt Male Recessed Power Outlet by QuickCar Racing®. This QuickCar Male Recessed Power Outlet is designed for a 110 Volt female cord end. When mounted on the race car it can be used to plug into oil tank heaters, engine...
      High quality at an affordable priceExpertly made from premium materials
      $22.95
    • (0 reviews)
      # 1002097711
      Ford Mustang Base Hardtop 4.3L / 4.7L 1964, American Thunder™ Dual Header-Back Exhaust System with Split Rear Exit by Flowmaster®. Exhaust Type: Header-Back. Main Tubing Diameter: 2.5". Exhaust System Sound: Moderate. American Thunder...
      $596.20 - $745.26
    • (0 reviews)
      # 838028863
      Ford Mustang 1964, Legend Series Drilled and Slotted Brake Conversion Kit by Master Power Brakes®. If nothing less than absolute quality will do, it does not get any better than this first-rate Master Power Brakes product. It is...
      $824.00 - $1,264.00
    • (0 reviews)
      # 55184556
      Ford Mustang Base Convertible / Hardtop Late Models 1964, 1.5 Street Performance Series Monotube Shock Absorbers by Hotchkis®. This is a mono-tube shock absorbers produced under license by Fox. Civilized during street driving, yet...
      $121.99 - $497.99
    • (0 reviews)
      # 245809657
      Ford Mustang Base 4.7L 1964, Air Ram Series Intake Manifold by Weiand®. Designed for the 5.0L Ford and LS series families, this intake pick up where the factory left off. Engineered to build horsepower and torque through optimized...
      Made with precision and quality in mindBuilt to last
      $176.95 - $232.95




    Don't just Stop
    Solves the toughest brake challenges
    WATCH VIDEOS

    CARiD is the ultimate source for premium-quality performance parts. With our extensive collection of performance upgrades, adding onto your vehicle's performance or improving its look is safe and easy. Boost the interior of your 1964 Ford Mustang with a set of racing seats, raise or lower your vehicle for an aggressive look, or add a set of high-performance brake rotors for superior braking. Unlock the hidden potential of your 1964 Ford Mustang that has been waiting to be released!

    Guides & Articles

    Useful articles fast to read and guides easy to understand written by mechanics and car enthusiasts to turn your shopping experience with CARiD into a pleasure

    • Engine Parts
      May 21, 2018
      How To Remove An Engine
      If you've grown tired of your engine's declining performance, inconsistent power, rough idle, exhaust smoke, knocking noises, rattles, and other maladies that plague...
      by Richard Reina
    • Engine Parts
      May 09, 2018
      How Does An Internal Combustion Engine Work?
      An engine that uses liquid fuel to create energy, such as an internal combustion engine, is basically a large air pump. Cool air is drawn in, mixed with the fuel of...
      by Timothy Zahl
    • Engine Parts
      May 02, 2018
      Glossary Of Engine External Parts
      Internal combustion engines are extremely complex and feature a wide array of components that rotate, pump, pressurize, or seal. Many of these components, while...
      by Timothy Zahl
    • Performance Engine Parts
      April 20, 2018
      What You Need When Rebuilding Or Replacing An...
      So you’ve decided to take on the project of rebuilding or replacing your vehicle’s engine. Modern internal combustion engines are quite complex – with a wide...
      by Richard Reina
    • Shift Knobs
      January 19, 2018
      Shopping Guide – Shift Knobs
      The knob at the end of your gearshift lever probably isn't something that most people notice when getting into your car or truck. But for a minimal cost, it can be. We...
      by Timothy Zahl
    • Running Boards
      November 29, 2017
      Shopping Guide - Running Boards
      Running boards date as far back as the automobile itself, being integrated into car and truck designs until falling out of favor after World War II. With the boom in...
      by Timothy Zahl
    • Off-Road Bumpers
      November 28, 2017
      Shopping Guide – Off Road Bumpers | Custom...
      There's a saying that advises out of all the paths you take in life, it's important to make sure a few of them are dirt. But while dirt can be found most anywhere you...
      by Timothy Zahl
    • Automotive Tools
      August 30, 2017
      What Special Tools Are Available For Exhaust...
      Exhaust work can be challenging. Old parts are usually corroded and difficult to separate, and new ones sometimes need minor fitment adjustments during installation....
      by Timothy Zahl
    • Automotive Tools
      August 24, 2017
      What Special Tools Are Available For Fuel...
      Maintenance and repair work on fuel systems must be done with precision, no matter what part of it you're working on. Tools specifically designed for use on fuel...
      by Timothy Zahl
    • Automotive Tools
      July 12, 2017
      What Special Tools Are Available For Driveline...
      The expression "heat and beat" applies to a lot of driveline repairs, meaning worn parts are often so difficult to separate that one must use a blowtorch and great...
      by Michael Grayen
    • Batteries & Power
      May 22, 2017
      High-End Audio Demands Its Own Battery Source
      When you're driving and headlights start to dim because a high-powered stereo is cranking, that means the deep bass you hear is causing total vehicle electrical draw...
      by Timothy Zahl
    • Oils, Fluids, Lubricants
      May 04, 2017
      What is Oil Viscosity, and Why is It Important...
      Motor oil viscosity is generally known as a measurement of thickness. But more specifically, viscosity determines an oil's resistance to flowing in liquid form as well...
      by Timothy Zahl

    Popular Products



    1964 Ford Mustang Performance Parts Reviews

    Average rating:  4.5  4.5 - 1 review
    4.5 of 5
    Shifter
    Great product.
    JPosted by John M Bencini (Centereach, NY) / February 7, 20181969 Ford Mustang
    Was this review helpful for you? Yes
    1964 Ford Mustang Models
    Low Prices Price match guarantee
    In-House Experts We know our products
    Guaranteed Fitment Always the correct part
    Easy Returns Quick & Hassle Free

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.

    SECURE SHOPPING