Dimensions of the Available Volant Promo Air Filters:
Part # Flange Inside Dia. (F) Base Outside Dia. (B) Top Outside Dia. (D) Hight (H) Style 5150 6" 7.5" 4.75" 8" Conical 5151 5" 6.5" 4.75" 8" Conical 5152 6" 6.5" W x 9.5" L 5.5" W x 8.25" L 6" Oval 5153 4.5" 7" 4.75" 9" Conical 5154 4" 8" 7" 7" Conical 5158 6" 7.75" 9" 7" Conical
- Improves engine airflow
- Increases horsepower and acceleration
- Superior filtration without reduced airflow
- Reduces maintenance costs
- Washable and reusable
- Get up to 12,000 miles between cleanings under normal driving conditions
- Made in U.S.A.
The engineers at Volant designed this filter for the increased airflow needs of deep breathing diesel engines. However, in the process they also created a filter capable of catching even the minutest particles of dirt. The Primo air filter is constructed of 5 layers of cotton gauze and 2 layers of a random-porosity, non-woven synthetic polyester fabric that’s sandwiched between an epoxy coated aluminum wire mesh.
The Primo filter requires cleaning only when it's very dirty or at around 12,000 miles. Lightly tap the filter on a hard surface or use a brush to gently remove excess dirt from the filter surface. Spray the filter with Volant air filter cleaner until thoroughly saturated, then let the filter soak for about 10 minutes. Rinse the filter from the inside out with low-pressure warm water from the tap or a hose until the water runs clear. Do not use high-pressure water or allow the filter to soak. Let the filter dry naturally or in front of a fan on the low setting. Do not use heat or high air pressure.
Finally, when the filter is completely dry, apply Volant air filter oil to the top of each filter pleat, then allow it to set for 20 minutes to wick throughout the filter media. If light spots appear, touch up those areas. The colored dye in the filter oil allows you to easily see where the oil has saturated the filter, eliminating the possibility of over-oiling the filter.57.48 72.21
Brand: Volant Part Numbers:
Volant® is the innovator of the Cool Air Intake System. They combine creative ideas with careful planning to develop air intake systems that ensure the engine takes in only cool air. Their innovative sealed air intakes with Cool Air Box are much different than open element style systems with "air dams". Every system is specifically designed for each application and rigorously tested to ensure it provides consistent improvement over the factory air intake system. A Volant Cool Air Intake System will provide the reliable performance your vehicle deserves, for many thousands of miles. All Volant air intake systems are proudly manufactured in the U.S.A., at their Rancho Cucamonga, California facility.
Product Reviews (0)
Product Reviews (0)