Cool Air Intake Kit with Pro 5 Filter by Volant®. Cooler air is denser and packs in more oxygen for better combustion and more horsepower. This air intake system features an airbox that completely insulates the air filter from engine heat, making sure only cool air reaches your engine. The result is quicker throttle response, improved acceleration and better fuel economy.
- Protective and insulating Airbox
- Quicker throttle response
- Improved fuel economy
- Custom designed for each application
- Works with OEM computer system
- Includes reusable Pro 5 air filter
- High Performance Silicone connectors
- Marine grade Stainless Steel clamps
- Easy to install
- Backed by a one-year warranty
- Made in U.S.A.
There are many cool air intake kits on the market, but how many deliver what they promise? All claim to position the air filter where it will draw in cool air. Some include barriers that are supposed to shield the air filter from engine heat. Only Volant features a sealed Cool Airbox that thoroughly insulates and protects the air filter from engine heat, moisture, dust and debris.
The engineers at Volant designed the Cool Airbox to house a large free-flowing Pro 5 air filter. The Pro 5 air filter, constructed of high grade cotton filter media with 5 layers of protection, is washable and reusable. It reduces air restriction and increases engine output by using precision pleat geometry that optimizes airflow throughout the intake system. The airbox air intake is located so the air filter can only draw in cooler, ambient air. Access to the air filter for servicing is provided by an attractive polished aluminum or carbon fiber look lid.
From the airbox, cool air proceeds to your engine through Volant's Cross-Link polyethylene air duct. Unlike OEM air ducts that have sound baffles and make awkward bends, the Volant air duct is sculptured to give the engine less restrictive breathing, incorporating larger diameters and unique bends that can't be duplicated with metal ducts. (Also, unlike metal ducts, the polyethylene Volant air duct doesn't conduct engine heat right into the intake airflow, thereby defeating the purpose of a cool air intake!) The end result is maximum airflow velocity and quicker throttle response.
Every Volant Cool Air Intake Kit comes complete with everything necessary for installation, including comprehensive installation instructions. All clamps and connectors are made from quality materials. The Silicone connectors provide flexibility while maintaining strength and thermal stability; they won't crack or deform over time like rubber connectors. The marine-grade stainless steel clamps provide a solid seal that won't loosen or deteriorate.204.31 634.18
Volant® is the innovator of the Cool Air Intake System. They combine creative ideas with careful planning to develop air intake systems that ensure the engine takes in only cool air. Their innovative sealed air intakes with Cool Air Box are much different than open element style systems with "air dams". Every system is specifically designed for each application and rigorously tested to ensure it provides consistent improvement over the factory air intake system. A Volant Cool Air Intake System will provide the reliable performance your vehicle deserves, for many thousands of miles. All Volant air intake systems are proudly manufactured in the U.S.A., at their Rancho Cucamonga, California facility.Product Reviews (38)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.VOLANT® - CAI Kit with Pro 5 FilterAverage Rating: 4.6 of 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYShow Next 10 Shop Now(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2003 Chevy Silverado | Posted by Don | (Magnolia, TX)
Looks good and fits better than the K&N. It is a lot quite also. It seem to perform as good as the other but has been installed just a few days so not able get a good comparison.Was this review helpful for you? YesNoShare this review:(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY1998 Dodge Ram | Posted by Kaden | (Riverton, UT)
I was a little skeptical when purchasing this, but it fits great, looks great, and has improved my gas mileage! The seal to the throttle body is superb, and the body of the intake looks very nice. Took a bit to get it all in the right place, but overall all a pretty amazing product.Was this review helpful for you? YesNoShare this review:(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2008 Toyota Tacoma | Posted by Tad | (Lakewood, CO)
I like the way it looks but needed to customize ram air a bit to fit and wish the rubber sleeves were a bit longer. And I don't like that the air sensor had to be screwed in wi nail type screws they should have pre drilled holes and cove rto motor is only held on with one but now after removing old air system but other than that product works great! And helps horse power and fuel economy with my banks cat back exhaust and bully dog programmer!Was this review helpful for you? YesNoShare this review:(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2005 Toyota Tacoma | Posted by Josh | (Pueblo, CO)
The product looks really good under the hood a lot better then stock. The installation was pretty easy took about 30 minutes from start to finish. Fits very well as a replacement from the stock intake with the factory hardware. It sounds really good has a nice throaty sound especially at 3k plus rpms. Definitely noticed a gain in low end torque from a dead stop. I bought the optional ram air scoop can't say honestly that it gives more torque because I installed right away with the intake but it does seem to pull in more air. The only issue I had was that the optional ram air scoop is that it did not line up with the holes that is says it's suppose to and the factory plastic pins definitely were too short to hold it on even if the holes lined up but I zipped tied it in place and have had no issues with it. It has not helped my fuel economy but I do have a lead foot and I love hearing that throaty sound it gives at high rpms so I can't honestly say it helps out with that my bad lol. Overall very satisfied with this intake and ease of installation.Was this review helpful for you? YesNoShare this review:(4.8)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2005 Ford F-150 | Posted by Scott | (Estevan, SK)
Love the cold air intake. The cover over the box in stainless is a very nice touch. Install was super easy. All hardware included was nice, no searching to find a nut or bolt to fit.Was this review helpful for you? YesNoShare this review:(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2010 Nissan Xterra | Posted by David | (North Branford, CT)
I bought this intake for my 2010 Nissan Xterra. It fits perfect, it looks awesome and the sound is really really nice. Its really loud when you hit the gas hard.Was this review helpful for you? YesNoShare this review:(3.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2004 GMC Canyon | Posted by Brian | (Coatesville, PA)
Definitely a quality product. Noticeable difference over stock system. I liked the fact that it has multiple air entry points not just one but 3 three. This system was the hardest Install out of all intake kits I have owned ( k & n, Airaid , Injen) the silicone sleeve for the I take tube to the throttle body is very hard to get on be careful not to damage it. Also the intake tube design over the #2 coil plug needs more clearance it's a tight fight over it. Maf sensor does not fit in exactly factory has rectangle shape Intake kit is circular had to modify. Overall not bad product just know it's not a simple install and could use improvements.Was this review helpful for you? YesNoShare this review:(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2010 Toyota Tacoma | Posted by Joan | (Hollister, CA)
After ordering this filter it only took about 3 days to receive, I realized I ordered the wrong item. I read the instructions and and determined I didn't need the filter with the scoop only a great performing filter. I sent 2 emails requesting a return and then contacted CARiD and re-ordered the correct item. aFe® 51-81162 - Stage 2 Si Cold Air Intake System with Pro DRY S Air Filter 2005 Toyota Tacoma / Item # 926638. I then waited for the return authorization form so I could send this one back since I ordered a knew one. If it could've worked out it was nice and looked simple to install except the scoop for my truck, it wouldn't fit.Was this review helpful for you? YesNoShare this review:(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2004 Nissan Pathfinder | Posted by Ion M | (Mt Horeb, WI)
For my 2005 Nissan Pathfinder. The product looks like it's supposed to be there. I've never been one to promote getting an intake without having computer upgrades or forced induction installed, but this one is a good buy. I don't think this necessarily has increased horse power, but it is noticeably more responsive in lower RPMs and I've gained 1mpg sine installing it. It's all composite so it does not absorb the ambient engine heat. Even the NISMO one is weak in comparison. If volant made one for my BMW, it would already be on there.Was this review helpful for you? YesNoShare this review:(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2010 Chevy Colorado | Posted by Ian | (Val Caron, ON)
Fit in 5.3l V8 Chevy Colorado with no major problem. Bolt that came with it was a tad to short and its a really tight fit. Sounds mean n runs smooth. Good product.Was this review helpful for you? YesNoShare this review:
Product Reviews (38)
Product Reviews (38)