- Product Details
Front Side Marker Replacement LED Bulb - 194, Green (194CG) by Lumen®, 1 Bulb. 9-LEDs bulb, 1.25" full length, 360 degree light output. Increase the output of your vehicle lights for safety and style with replacement LED bulbs that are fitted to install easily in original light sockets without modification. CAN Bus compatibility ensures no flickering, bulb out warnings, check engine lights, or other data loop errors on modern vehicles so equipped. 1-year manufacturer warranty.
Fitment Notes: The bulb is 1.25" long. Please make sure it will fit behind the lens.
- Bulb: 194
- Light Color: Green
- LED Amount: 9 Diodes
- Beam Pattern: 360 Degree
- Color Temperature: White - 5500K
- Wavelength: Green - 520-522
- LED Type: 5050 SMD
- Light Intensity (Max): 50 Lumen
- Polarized: No
- CAN-Bus Compatible: Yes
- Operating Voltage: 10~14.5 VDC
- Base Type: T10 Wedge
- Bulb Dimensions: 1.26" (3.2cm) * 0.47" (1.2cm)
- Replaces OE Bulbs #: 194B, 194G, 194NA, 194R, 168A, 168NA, 158, 160, 161, 161B, 175, 193, 2821, 2825, 2827, 2886X, 3652, 5200, 5200S, 558, 579, 658, W5WB
- Bulb Specifications Glossary
Up to 50,000 hours of lifetime compared to 2,000 hours for traditional bulbs.
- LEDs illuminate 0.2 seconds faster than incandescent bulbs, or about 10 times faster.
- At typical highway speeds, faster illumination allows other drivers 28 additional feet of distance to react.
- LEDs use less energy than traditional bulbs without getting hot.
- There will be no yellowing, hazing, or micro-cracking on your plastic lens due to high heat exposure.
LEDs produce brighter, more concentrated light allowing a greater distance for you to see and be seen from in all weather conditions.
Designed to fit original factory bulb sockets for easy installation.
Properly equipped with load resistors, Lumen LEDs will not interfere with CAN Bus data systems on modern vehicles so equipped.
Customize and brighten your original factory bulb with a replacement Lumen LED bulb and enjoy cleaner-looking luminosity that dazzles the eye, a selection of colors, and a much longer life span. If you prefer value, choose the standard LED version of this bulb. If you prefer an LED that offers twice the brilliance of standard LEDs, choose the Plazma LED version of this bulb. Both LED designs come sealed in moisture-proof casings and are extremely resistant to vibration. Because no substrate is consumed during use, both standard and plasma LEDs typically last 50,000 to 75,000 hours once installed on your vehicle – giving you a lifetime of freedom from the nuisance of replacing small, hard-to-access bulbs. And since both types of LEDs operate at one-third the temperature of incandescent bulbs, you'll find exterior plastic covers surrounding them will not degrade from heat. Never has avoiding the yellow hazy buildup that reduces visibility at night and makes your vehicle look old been easier.
How do plasma LEDs work compared to standard LED bulbs? Standard LEDs emit light directly from semiconductor chips when current is applied, instead of from a vacuum the way incandescent bulbs do. In plasma bulbs, a radio frequency signal is generated by a solid-state power amplifier and directed into an electric field created inside the bulb. Once current is applied, gas and metal halide materials inside the bulb vaporize into a plasma state to create light output that is as twice as dazzling as standard LEDs. Both types offer greater efficiency than incandescent bulbs because power is not lost in the production of heat. Standard LEDs generate 70 lm/W on average and plasma LEDs generate around 150 lm/W, far greater than 15 from incandescent bulbs.
Lumen offers both standard and plasma LED bulbs for virtually every part of your vehicle's interior and exterior that illuminate. Whether it's daytime running lights, brake lights, license plate lights, parking lights, backup lights, and turn signal bulbs for your vehicle's exterior or small-sized lights for dashboard gauges, indicator warning lights, or overhead dome bulbs, you'll find the best ways to customize your vehicle here.
You may have heard horror stories from folks that have replaced factory halogen bulbs with LEDs only to find these new bulbs caused "bulb out" error messages, worked sporadically, or triggered check engine light. Because your fog lights are controlled by a specific module that is in series with other vehicle control computers, something as simple as an improperly designed bulb can break the loop of data communication telling your main engine controller all systems are go. Lumen bulbs are CAN Bus compatible, and have been designed with a higher level of advanced technology that allows proper data flow – so they'll work right every time with no error messages, and without confusing any computer controls. CARiD also offers Lumen replacement LED bulbs for daytime running lights, parking lights, backup lights, and turn signal bulbs.8.99Brand: Lumen Part Number: 194CG
Lumen began as a supplier of lighting equipment for commercial applications and attributes its success to focusing on the cutting edge of technology, understanding customer needs, and thinking outside of the box. Lumen has always sought to be on the cutting edge of lighting technology and offer products that make the impossible become possible, and today Lumen is a premiere producer of LED replacement bulbs that upgrade the performance of every light in your vehicle – from small warning light indicators to daytime running lights. Unlike many inferior LED bulbs that interfere with communications between lighting control modules and main engine control computers in modern vehicles, Lumen LED bulbs are fully compatible with all CAN Bus data systems. CARiD is proud to offer you the Lumen family of LEDs, and we do so with the assurance that comes only after our own employees have tested them extensively in their own vehicles. When you want impressive lighting in colorful choices for your car or truck that uses less energy, Lumen is the only name you need to know.Product Reviews (10)Lumen® 194CG - Front Side Marker Replacement LED Bulb (194, Green)Average Rating: 4.5 of 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYShow Next 10 All Lumen Reviews(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYEasy to Install and Looks Awesome!!!2002 Honda CR-V
| Posted by Gabriel V. | (Redwood City, CA)
Look people, CARiD has the lights you need to beef up the interior of your car with some LED lights. Also you can get them for outside interior also. So check out their web page. Installed a pair of blue LED's in my 2002 CR-V. Did all the interior lights. Looks really good. Plus when friends see it, they ask where did I get the cool looking lights. So, if you are in the market of some nice LEDs, check out CARiD.Was this review helpful for you? YesNo(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYDon't Forget the Load Resistors2007 Dodge Caliber
| Posted by Joseph H. | (Louisville, KY)
I like using LED bulbs because they don't require heat up time and you almost never have to worry about replacing them. These bulbs put out great light. Just don't forget the load resistors or you will get a bulb out warning or, in my case, a really fast blinker.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYGreat Product2009 Nissan 370Z
| Posted by Willie J. | (El Paso, TX)
I bought the Red LED Bulb for my 370Z and it has been great!!! The LED Bulb provides more light for the interior of the car. A must purchase for your Z!Was this review helpful for you? YesNo(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYAn Ok LED Bulb| Posted by Cameron C. | (Vacaville, CA)
Well, these bulbs are OK I suppose. They work OK, but the pins come out pretty easily. CARiD advertises that these bulbs don't need resistors for installation. Well, I chatted with the online rep, and she did in fact confirm resistors were not needed, and the hyper flash issue would not arise. You do need resistors... Then when my bulbs arrived, one was broken. CARiD sent me a replacement one for free, as well as a set of resistors to fix the hyper flash. Customer service is excellent, however advertisement has some misleading info. Overall a good shopping experience.Was this review helpful for you? YesNo
- More Accessories
- Product Reviews
Product Reviews (10)