Black CCFL Halo Projector Headlights with LEDs (PRO-YD-CHIP00-CCFL-BK) by Spyder®, 1 Pair. Includes H1 High Beam and H1 Low Beam Bulbs. Improve your vision and your vehicle’s appearance with these bolt-on headlight assemblies. The projector beam headlights will produce a sharper, more focused beam of light for safer driving at night, the bright CCFL Halos and LED lights will make your vehicle more visible to other drivers, and the Halos, LEDs and custom headlight housing will give your ride an exclusive, unique look. Meets all federal regulations for street use. Alternative Part Number: 5009388.
- Low Beam Bulb: H1, Included, Made by Osram®
- High Beam Bulb: H1, Included, Made by Osram®
- Halo Rings: CCFL Inverter Type, by 2 per Headlight, 100.000 hrs Life Span
- Lens Material: PC - Polycarbonate
- Back Housing Material: PP - Polyprophite
These projector headlights will benefit you and your car or truck in 2 ways. First you get superior illumination, which enables better vision in darkness and inclement weather, for safer driving. This is because the bulb in a projector headlight is positioned in front of an elliptical-shaped reflector. Where a conventional parabolic type reflector reflects light outward in a dispersed pattern, the elliptical reflector reflects the light toward a single focal point in front of the bulb. Projector headlights produce a sharper, more focused beam of light with less scatter loss. The second benefit is made possible because of the projector headlight’s smaller size in comparison to a conventional headlight. Without the need for a large parabolic reflector, the stylists at Spyder have used the increased space within the headlight housing to include CCFL Halos and bright LED lights, working their styling magic to create the one-of-a-kind, custom designed CCFL Halo projector headlight with LEDs that you see on this page. Just by replacing your old, dim headlights you’ll gain a safer, more pleasurable driving experience, and give your vehicle an appearance makeover that will result in head turning looks.
Sharper, more focused beam increases driving safety.
Unique, custom styling
Smaller projector beam light allows more room for creative styling, and Halos and LEDs.
Bright CCFL Halos and LEDs will make your vehicle more conspicuous.
Direct bolt-on replacement
Designed to be an exact replacement for your factory lights, however some electrical wiring work may be required; most lights come with detailed installation instructions.
Thoroughly tested to ensure operation and completely sealed to prevent moisture from being trapped inside.
Meets all quality and legal standards
Meets ISO 9000 and 9002 quality standards. Approved by the SAE. Meets DOT regulations and compliant with FMVSS 108.
CCFL (Cold Cathode Fluorescent Lighting) is the ultimate in Halo lighting. Conventional Halo lights use one bulb and their light is uneven. CCFL Halos are filled with gas, like a neon sign, and display the same kind of glow. They’re four times as bright as conventional Halo lights. LED lights are the most advanced form of lighting. Their compact size makes it easy to arrange them in distinctive patterns, as seen on many late model luxury cars. They’re extremely durable, with an average lifespan of 50,000-75,000 hours, which means they’ll probably outlast the rest of your vehicle. The light they produce is much brighter and cleaner, much more attractive than incandescent light, which helps get them and the vehicle noticed, for increased visibility on the road and safer driving for you. The pattern of the LEDs in these lights is unique, so your ride will command attention wherever you go.
Every Spyder headlight undergoes a rigorous testing and quality control process before it leaves the factory. All wiring is tested to make sure the light is completely functional, and the housing is sealed with high quality silicone to ensure that no moisture can become trapped inside. Spyder lights are approved by the Society of Automotive Engineers (SAE), and ISO-9000 and ISO-9002 certified. They meet all U.S. Department of Transportation (DOT) regulations, and are compliant with Federal Motor Vehicle Safety Standard (FMVSS) 108.244.18Brand: Spyder Part Number: PRO-YD-CHIP00-CCFL-BK UPC: 847245009388
Spyder Auto® is an automotive styling and performance accessories supplier based in City of Industry, California. The company has been serving the automotive industry for nearly a decade, during which time they have consistently outpaced the competition by offering products with cutting edge design and class leading performance, manufactured to the highest quality standards. Their performance lighting provides unparalleled styling with the latest performance advancements including projector beams, LEDs, and Halos, and they also offer an extensive selection of conventional and OE style lighting. From stock replacement to the most elaborate custom creation, all are price competitive with OEM light units, making Spyder the affordable alternative that delivers more style, performance, and quality while leaving more cash in your pocket.Product Reviews (6)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.Spyder® PRO-YD-CHIP00-CCFL-BK - Black CCFL Halo Projector Headlights with LEDsAverage Rating: 4.6 of 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2005 Chevy Impala | Posted by Richard | (Allen, TX)
Like the lights although there was a problem with the first set. The passenger light was bad out of the box. Got another set and it was OK. Installation was easy until you need to connect the three LED wires and two CCFL wires to the parking light wire. That proved a challenge as I could not get schematic to show me proper wire to connect to and had to go to my mechanic to find out which wire was correct. Parking light wire is different color for each side so had to be careful with that as well. After all was done though the lights work fine and look good too.1 people found this review helpful.Was this review helpful for you? YesNoShare this review:(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2005 Chevy Impala | Posted by Naamon | (Port Wentworth, GA)
Love my headlights, they were easy to install and a great buy. If u are looking for a new look and style, u should get these. But a tip for all that get these headlights, CARiD is the place to go for your products.1 people found this review helpful.Was this review helpful for you? YesNoShare this review:(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2005 Chevy Impala | Posted by Victor | (Augusta, GA)
Excellent looking product, was easy to install, instructions were easy to follow. Getting all sorts of compliments on appearance. It changed the whole appearance of the car.3 people found this review helpful.Was this review helpful for you? YesNoShare this review:(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2002 Chevy Impala | Posted by Kevin | (Lancaster, NY)
The lights look great on my car. They really add something to the appearance. Very glad I purchased them.3 people found this review helpful.Was this review helpful for you? YesNoShare this review:(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2001 Chevy Impala | Posted by Justin | (Savannah, GA)
Installed lights on my vehicle and it makes my car look nice. Immediately peers noticed the change and liked them. makes your car stand out.4 people found this review helpful.Was this review helpful for you? YesNoShare this review:(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2000 Chevy Impala | Posted by Rocco matthew | (Ajax, ON)
I have owned these lights for just over a month now and I am quite pleased. The assembly gave my Impala that extra aggressiveness that I was looking for. A couple things turned me off though, such as one of the CCFL halo's going dim on start up (rare) and where the adjustment screws are for the positioning of the low and high beams (hard to access without taking out the whole assembly).3 people found this review helpful.Was this review helpful for you? YesNoShare this review:
- Vehicle FitmentThis part is compatible with 6 vehicle(s)
Year Make Model Fitment Notes 2005 Chevy Impala 2004 Chevy Impala 2003 Chevy Impala 2002 Chevy Impala 2001 Chevy Impala 2000 Chevy Impala
Product Reviews (6)
Product Reviews (6)
You will never pay more with CARiD! Not only will we match prices from any competitor's website or other reputable source, we will continue to honor that promise for up to one year after your purchase.
We'll match the price at time of purchase, or refund you the difference if done after the purchase. Either way, we are totally committed to providing you the best online shopping experience.
We're car and truck enthusiasts, just like you! And it's enthusiasts we hire in our Sales and Service Centers. Many of our staff are ASE certified and have spent years in the retail auto business.
We conduct our own in-house training, and we even bring vendors to us for hands-on product training demonstrations. You're getting true expertise when you phone or email us!
With hundreds of vendors, and tens of thousands of components for sale, we put tremendous effort into coordinating our data with our vendors' data in order to guarantee that you get the correct part.
Our huge database is regularly cross-checked to keep it current and optimized. At times, our thoroughness makes our data even more accurate than our suppliers! This rigorous process means that you can always order with confidence.