XRC Rear Bumper With Tire Carrier (76851) by Smittybilt®. Engineered to provide increased clearance for rock crawling, this bumper has raised corners and high-degree approach angles for maximum ground clearance. Manufactured for extreme toughness from 3/16" cold rolled steel, it features a built-in Class III 2" receiver hitch, D-ring mounts, jacking points, swing-away tire carrier that can carry up to a 38" tall tire, and a dual stage textured black powder coated finish. Comes with hardware and instructions for an easy bolt-on installation.
- Raised corners for better entry and exit under the most extreme conditions
- High-degree approach angles to maximize ground clearance
- Built-in Class III 2" receiver hitch
- Constructed from thick 3/16" cold rolled steel
- Robotically welded to exact specifications
- One-piece welded design
- All welds ground down and smoothed
- Includes 2 D-ring mounts
- Includes built-in jacking points
- Dual stage textured black powder coated finish
- Swing-away tire carrier that can carry up to 38" tall tire
- Tire carrier can also carry cargo like jack and gas can
- Tire carrier features easy opening latch, grease zerk, and cam style pin adjustment
- Easy bolt-on installation; no modifications to your vehicle required
- Comes with mounting hardware and detailed instructions
- 5-year limited warranty on bumper finish
- Limited lifetime warranty against defects in workmanship and materials
When you want to go rock crawling with your Jeep, you know you have to replace your stock rear bumper. It was made to satisfy highway regulations and it's fine for cruising the boulevard, but off-road it's only going to get in the way, not provide much protection, and won't mount most off-road accessories. For maximum rock crawling ground clearance, maximum protection, and maximum accessory mounting capability you can't do better than the Smittybilt XRC Rear Bumper.
The XRC is designed with raised corners and high-degree approach angles for greater tire travel and enhanced entry and exit points. With the XRC you'll never have to worry about getting hung up. But even though the XRC is smaller than your stock bumper, it's much tougher. Constructed from thick 3/16" cold rolled steel, all joints are robotically welded to the exact design specifications.
Besides its ruggedness and rock crawling creds, the XRC has a built-in Class III 2" receiver hitch. It includes solid D-ring mounts and built-in jacking points. And for the best appearance and long-term durability, all welds are ground down and smoothed, the bumper is acid dipped to remove impurities, a special "E-Coat" is applied inside and out, and finally a dual stage textured black powder coat finish is applied.
For the ultimate in functionality and convenience, the XRC comes with a swing-away tire carrier. This carrier is made super-strong to be able to carry up to a 38" tall tire, plus cargo like a gas can and off-road jack, yet swing away easily for access to the rear hatch. It includes a greasable zerk fitting to enable pivot lubrication, an easy opening latch, a cam style pin adjustment to provide perfect closing, and an adjustable tire mount.
Designed to be an easy bolt-on installation, the XRC comes with all necessary mounting hardware and detailed instructions. The XRC Rear Bumper is covered by a 5-year limited warranty against finish defects and a Smittybilt Advantage limited lifetime warranty against defects in materials and workmanship.
Fitment Note: Always check the towing specifications for your specific vehicle before attempting to tow anything. The vehicle's towing capability ultimately determines what you are able to tow, not the hitch rating.749.99Brand: Smittybilt Part Number: 76851 UPC: 631410102321
SmittyBilt®, located in Compton, California, is the leader in the off-road parts and accessories market because they were there at its inception. Founder Basil Smith, also known as "Smitty", was one of the original Southern California 4WD enthusiasts. He started a business called Rock-ett Products, making specialized equipment for trucks and Jeeps, in his garage/machine shop in 1956. Smitty's son Tom began working at Rock-ett at an early age and became head of the ever-expanding enterprise when it became Smittybilt in the 1970s. Under Tom's leadership, the company created innovative products like the original "Nerf Bar" side step, and tubular front and rear bumpers for Jeeps. Today, thanks to their continued involvement in off-roading at all levels of the staff, which enables them to keep abreast of the latest trends and needs in the off-road market, Smittybilt remains the industry leader with a selection of over 2000 different products for trucks and SUVs.
- Vehicle FitmentThis part is compatible with 18 vehicle(s)
Year Make Model Fitment Notes 2001 Jeep Cherokee 2000 Jeep Cherokee 1999 Jeep Cherokee 1998 Jeep Cherokee 1997 Jeep Cherokee 1996 Jeep Cherokee 1995 Jeep Cherokee 1994 Jeep Cherokee 1993 Jeep Cherokee 1992 Jeep Cherokee 1991 Jeep Cherokee 1990 Jeep Cherokee 1989 Jeep Cherokee 1988 Jeep Cherokee 1987 Jeep Cherokee 1986 Jeep Cherokee 1985 Jeep Cherokee 1984 Jeep Cherokee
Product Reviews (0)
Product Reviews (0)