SRC Side Armor by Smittybilt®. When you want the ultimate in rocker area protection as well as a helpful step up into your Jeep, you need SRC Side Armor. Instead of a single tube, these guards have 3 tubes with supports that form a girder system, for protection that extends from wheel-to-wheel and spans from the underside to the entire rocker panel. Constructed from heavy-duty 2" diameter 0.120" wall thickness tubing, these guards are dual stage powder coated in matte black and easily bolt-on to your Jeep with no drilling required.
- Dual girder system provides maximum wheel-to-wheel protection for underside and rocker panel area from damaging impacts
- Keeps Jeep from catching on rocker panel and hanging up on obstacles
- Also serves a helpful step in and out of the cab; particularly useful on lifted Jeeps
- Heavy-duty 2" diameter 0.120" wall thickness tubes
- One-piece design
- Dual stage powdercoated matte black finish
- Available for 2-door and 4-door models
- Bolts easily to front and rear body mount brackets, no drilling required
- Comes with detailed instructions
- Limited 5-year warranty against finish defects
- Limited lifetime warranty against manufacturing defects
Any kind of off-roading, but especially rock crawling, can be rough on your Jeep's rocker panels. Left unprotected, they can be severely damaged by impacts with rocks, tree stumps, and other obstacles. SRC Side Armor guards have 3 tubes instead of 1 that form a dual girder system, for maximum protection of these vulnerable areas. And these tubes extend from wheel-to-wheel and from the underside to just below the doors, for the most extensive protection available. They'll not only provide protection, their smooth surface will help keep you from getting snagged and hung up, so you can keep wheeling instead of trying to get unstuck. Plus, they'll serve as a step to give you an assist getting in and out of your rig.
Manufactured from heavy-duty 2" diameter 0.120" wall thickness tubes, the one-piece design arrives ready to install. Each guard is acid bath dipped to remove impurities, a special "E-Coat" is applied inside and out, and a dual stage matte black powder coat finish is applied. These guards install easily to the front and rear body mount brackets, with no drilling required, and detailed instructions are provided. The SRC Side Armor is covered by a limited 5-year warranty against finish defects and a limited lifetime warranty against defects in materials and workmanship.269.99 339.99
SmittyBilt®, located in Compton, California, is the leader in the off-road parts and accessories market because they were there at its inception. Founder Basil Smith, also known as "Smitty", was one of the original Southern California 4WD enthusiasts. He started a business called Rock-ett Products, making specialized equipment for trucks and Jeeps, in his garage/machine shop in 1956. Smitty's son Tom began working at Rock-ett at an early age and became head of the ever-expanding enterprise when it became Smittybilt in the 1970s. Under Tom's leadership, the company created innovative products like the original "Nerf Bar" side step, and tubular front and rear bumpers for Jeeps. Today, thanks to their continued involvement in off-roading at all levels of the staff, which enables them to keep abreast of the latest trends and needs in the off-road market, Smittybilt remains the industry leader with a selection of over 2000 different products for trucks and SUVs.Product Reviews (4)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.Smittybilt® - SRC Side ArmorAverage Rating: 4.6 of 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYShop Now(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYBuilt For Jeep...Installed on Avalanche2013 Jeep Wrangler | Posted by Doug | (Seabrook, TX)
I bought the SRC Side Armor that is made for a 4 door Jeep hoping it would fit the lines of a Chevy Avalanche with body cladding. It turned out perfect. The side armor is very well made and was easy to modify to fit the bracket hardware for the avalanche.Was this review helpful for you? YesNoShare this review:(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2007 Jeep Wrangler | Posted by Darrin E | (Menifee, CA)
These match the M.O.D. front bumper really well. Mine went on in 15 minutes (super easy). Super strong. I love them!Was this review helpful for you? YesNoShare this review:(4.8)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2013 Jeep Wrangler | Posted by Jeffrey | (South Paris, ME)
I have the 2014 Jeep Wrangler. I ordered side armor, and they came a day earlier. The fit was pretty good, and I had to grind the body mount to get the nut on with socket. They look great. I would buy these again.1 people found this review helpful.Was this review helpful for you? YesNoShare this review:(4.3)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2013 Jeep Wrangler | Posted by Katelyn | (Newton, MA)
One side of the side armor step fit perfectly and was easy to install. However, the other side I had to grind to make larger holes for the screws to fit, since they did not match up properly. Once it took me 2 hours to grind, it fit perfectly, and all looks amazing.2 people found this review helpful.Was this review helpful for you? YesNoShare this review:
Product Reviews (4)
Product Reviews (4)
You will never pay more with CARiD! Not only will we match prices from any competitor's website or other reputable source, we will continue to honor that promise for up to one year after your purchase.
We'll match the price at time of purchase, or refund you the difference if done after the purchase. Either way, we are totally committed to providing you the best online shopping experience.
We're car and truck enthusiasts, just like you! And it's enthusiasts we hire in our Sales and Service Centers. Many of our staff are ASE certified and have spent years in the retail auto business.
We conduct our own in-house training, and we even bring vendors to us for hands-on product training demonstrations. You're getting true expertise when you phone or email us!
With hundreds of vendors, and tens of thousands of components for sale, we put tremendous effort into coordinating our data with our vendors' data in order to guarantee that you get the correct part.
Our huge database is regularly cross-checked to keep it current and optimized. At times, our thoroughness makes our data even more accurate than our suppliers! This rigorous process means that you can always order with confidence.