- Finished in glossy clear coat that will not chip or flake
- Aerodynamically designed
- One-piece carbon sheet construction for consistent weave pattern
- Exceptional carbon/resin ratios for high stiffness and extra product strength
- Manufactured from the highest grade carbon fiber raw material
- Lighter than original panel
- Over 15 years' experience creating carbon fiber components
- 6-month limited clear coat warranty
- This product is designed for style and performance. Please be aware of your local laws and regulations
SEIBON creates performance oriented carbon fiber body panels that save weight, add style and are durable enough to hold up under grueling racing conditions. The production team at SEIBON has over 15 years' experience, and they use the latest cutting-edge technology to manufacture hand-laid or vacuum infused carbon fiber panels.
Construction starts with the highest grade carbon fiber raw material, the same kind used in aviation, satellites and rockets. All SEIBON panels are made with 1-piece carbon sheet, so appearance and strength are not impaired by the broken lines and patterns characteristic of multiple sheets put together. The carbon sheet is supported by a fiberglass "skeleton", but SEIBON builds the carbon sheet into the mold so it doesn't break and split, like inferior carbon fiber panels where the carbon is only wrapped around the skeleton.
SEIBON uses a clear coat finish, for a shiny, durable "wet" look, as opposed to the duller finish found on panels with a gel-coat finish. A special mix of high-tech resin results in excellent transparency with no clear coat chips or flakes. SEIBON's construction process also utilizes a high carbon/resin ratio, for exceptional product stiffness and high strength. The end result is a strong, durable, attractive panel that will look great on your car and weigh up to 50% less than the original panel.
Once created, all SEIBON carbon fiber components are meticulously inspected for quality and to ensure fitment. However, the buyer should understand that no aftermarket body part will fit exactly like the original equipment part. Some products may require minor modifications, and minor adjustments may be necessary as part of the normal installation process. We recommend professional installation by an installer familiar with the installation of aftermarket carbon fiber components. If parts are to be painted they should be pre-fit to the vehicle before painting because painted products cannot be returned.
To prevent damage to carbon fiber hoods and trunks/hatches, SEIBON recommends that the stock springs or shocks/dampers/struts not be reinstalled. SEIBON also recommends that hood pins be installed for safety when installing a carbon fiber hood.
SEIBON will replace any carbon fiber component that exhibits heavy cloudiness under the clear coat or has a clear coat bubble larger than 3/8". They will also replace any panel where the clear coat changes more than a full shade within 6 months. Slight fading and discoloration over time is natural. To preserve carbon fiber hood finish, SEIBON recommends that the heat shield from the original hood be transferred to the carbon fiber panel, or that an aftermarket heat shield product be installed.272.00 1,870.00
SEIBON® Carbon is a division of SEIBON International, Inc. The company specializes in the design and manufacture of high quality carbon fiber body components for late model sport compact cars. The company was founded in 2003 by automotive enthusiasts who recognized the demand for top quality carbon fiber products and then set out to create the best products on the market. Today, SEIBON builds cutting-edge designed products using only the highest quality raw materials and the latest high-tech manufacturing techniques. SEIBON products have been featured on television shows, in movies, at racing events, on magazine covers, and at national and regional auto shows.Product Reviews (10)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.SEIBON® - Carbon Rear SpoilerAverage Rating: 4.5 of 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYShop Now(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2013 Mitsubishi Evolution
| Posted by Christopher | (Lake Oswego, OR)
Did my research and this wing fits 08+ Lancers (all trim levels). Your trunk has dimpled location spots for easy drilling. It has three bolts per side but most people just use the two outside holes. Third inside hole is a bit hard for anyone to locate. I had the GTS wing and the one hole that is no longer used is completely covered by this wing. The quality is gorgeous with perfectly straight lines. Lots of clear coat for an impressively smooth glossy surface. Reflects well enough in the sun to appear black from ten feet away. Perfect for my black Lancer. Everyone that has seen this wing has been impressed including people that are not CF fans. I would recommend this wing to anyone looking for the EVO look in a spoiler.Was this review helpful for you? YesNoShare this review:(4.8)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2013 Honda Accord
| Posted by Mark | (Lancaster, CA)
High quality carbon fiber. Fits good and looks good. Installation is pretty straightforward. Need some bolts and nuts to complete the installation. Otherwise, it was perfect.Was this review helpful for you? YesNoShare this review:(4.8)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2008 Mazda RX-8
| Posted by Ronald | (Bargaintown, NJ)
Fit and finish was perfect.Was this review helpful for you? YesNoShare this review:(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2013 Honda Accord
| Posted by Robert | (Scottsdale, AZ)
Spoiler was packaged satisfactory, but one of the side wing plates was delaminated.1 people found this review helpful.Was this review helpful for you? YesNoShare this review:(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2013 Scion xB
| Posted by Quentin | (Jamaica, NY)
I was very pleased with this product. It gives the car a very different look, a more sporting one.10 people found this review helpful.Was this review helpful for you? YesNoShare this review:(4.8)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2013 Ford Mustang
| Posted by Robert | (Painesville, OH)
The spoiler is a nice piece and it gets positive comments all the time. There are a few small issues though. The clear on the spoiler arrived with slight scratches and areas where it looks as though the clear coat isn't quite completely polished. Also, the mounting studs were about 3/8" too long. If I would have noticed before mounting, I would have trimmed them. The spoiler came with no instructions, hardware, or double-backed mounting tape. I had to spend an extra $15 for two rolls of 3M automotive tape and I reused the nuts from the original spoiler. Overall a beautiful, lightweight piece, but for the price, I would have expected more attention to detail.10 people found this review helpful.Was this review helpful for you? YesNoShare this review:(4.3)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2011 Subaru WRX
| Posted by Dakota | (Elko, NV)
From the second I unwrapped it, this spoiler looked bad a** and the second it was on the car was instant wow. I purchased the trunk to go along with this, and had Seibon driill the mounting holes, as well no issues went on like it was from Subaru themselves.5 people found this review helpful.Was this review helpful for you? YesNoShare this review:(3.8)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY| Posted by Christopher | (Garland, TX)
It seems look a good product, the only problem is the screws are zinc, so I bought stainless steal. I also bought some rubber gasket material to put between the car and the spoiler for a water seal.7 people found this review helpful.Was this review helpful for you? YesNoShare this review:(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY| Posted by Juan F | (El Dorado Hills, CA)
Overall, I feel the product is super cool. The only thing I didn't like were most of the bolts were cheesy. The mount bolts were okay, but didn't come with nuts or washers. I spent about $16.00 replacing the other bolts and nuts with stainless steel bolts and lock nuts which won't rust. I highly recommend doing this.13 people found this review helpful.Was this review helpful for you? YesNoShare this review:(4.8)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2009 Nissan GT-R
| Posted by Alex | (Miami, FL)
I've installed the Carbon Fiber GT Wing Spoiler and the item has significantly changed the appearance of the car. My wife and I appreciate your job. We like this wing!!!20 people found this review helpful.Was this review helpful for you? YesNoShare this review:
Product Reviews (10)
Product Reviews (10)
You will never pay more with CARiD! Not only will we match prices from any competitor's website or other reputable source, we will continue to honor that promise for up to one year after your purchase.
We'll match the price at time of purchase, or refund you the difference if done after the purchase. Either way, we are totally committed to providing you the best online shopping experience.
We're car and truck enthusiasts, just like you! And it's enthusiasts we hire in our Sales and Service Centers. Many of our staff are ASE certified and have spent years in the retail auto business.
We conduct our own in-house training, and we even bring vendors to us for hands-on product training demonstrations. You're getting true expertise when you phone or email us!
With hundreds of vendors, and tens of thousands of components for sale, we put tremendous effort into coordinating our data with our vendors' data in order to guarantee that you get the correct part.
Our huge database is regularly cross-checked to keep it current and optimized. At times, our thoroughness makes our data even more accurate than our suppliers! This rigorous process means that you can always order with confidence.