- Product Details
LED Tail Lights by Rugged RidgeŽ. Give your Jeep a unique look and increase your driving safety at the same time, just be replacing your dim factory tail lights with these super bright LED tail lights. They're direct replacements for your original lights and they meet all government regulations.
- Improves rear illumination for increased driving safety in the dark
- Faster rise time for increased safety when stopping
- Vibration resistant
- Direct replacement
- Meets all government regulations
- Comes with detailed installation instructions
- Backed by a 5-year limited warranty
The original tail lights on many Jeeps, especially older models, are small and dim, making these vehicles hard to see at night. Now you can drastically increase the brightness of your tail lights without having to increase the size of the housings, with these LED Tail Lights from Rugged Ridge. They've packed multiple super bright LED lights into each housing, for an amazing increase in brightness. And LEDs have many other advantages over incandescent bulbs.
LED lights have an average lifespan of 50,000-75,000 hours, far longer than any incandescent bulb. They're much more energy efficient, using 90% less power than incandescent bulbs. And the light they produce is much brighter and cleaner, much more attractive than incandescent light. LEDs are also extremely vibration resistant, an important consideration for a vehicle driven off-road.
One of the most important advantages is their faster rise time. LEDs rise to their full intensity approximately 200 milliseconds faster than incandescent bulbs. This may not seem like a lot of time, but it may only be a split second that's needed for the driver behind you to see your stop lights and react to avoid an accident.
Rugged Ridge LED lights are a direct replacement for your factory tail lights. On some models, the mounting holes may have to be opened up a bit using a 5/16" drill bit, but that's the only modification required. These LED lights are completely compatible with your Jeep's electrical system, and instructions are included to connect the wiring. Rugged Ridge LED Tail Lights are DOT and SAE approved and are FMVSS108 compliant. They're backed by a 5-year limited warranty against defects in materials and workmanship.36.58 151.97
Rugged RidgeŽ is a division of Omix-Ada, the leader in Jeep replacement parts. Based in Suwanee, Georgia, Rugged Ridge was begun almost two decades ago when the enthusiasts at Omix-Ada decided that even a vehicle as tough as a Jeep could be improved upon. Since then, Rugged Ridge has created over 500 accessories to improve your Jeeps performance, utility and appearance. Unlike parts made for ordinary vehicles, Rugged Ridge knows that every part made for a Jeep must uphold the Jeep tradition of strength and capability, so every part is designed, tested, manufactured and tested again to make sure its perfected. Then and only then can it be installed on your Jeep.Reviews (10)Customers' rating: 5 OF 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYEasy to Install and Kind of Retro| Posted by Aj W. | 2013 Jeep Wrangler (Millstone, NJ)
These mirrors are so easy to install. It took about 5 minutes. You can use the existing bolts on the windshield frame, and because it comes with its own, now you have extra ones in case anything happens to your current ones. And when I want to put the doors back on, you can just release the knob on the mounting bracket, and the mirror comes right off, leaving the bracket behind, which is barely noticeable. All in all, this is a really good product for the price that I paid for it.Was this review helpful for you? YesNo(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYWhat a 'Bugger!'| Posted by James G. | 2013 Jeep Wrangler (High Springs, FL)
Bug deflector looks real nice once I was able to install it on my 2013 Jeep Sport. Screws that came with product did not want to go through the metal, so I got my own self tapping screws to do the job, and all was good. Love it and it looks great.Was this review helpful for you? YesNo(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYBlack Bezels| Posted by Bruno B. | 2006 Jeep Wrangler (Woodland Park, NJ)
Product looks great. I like the finish, it is easy to install. The only problem I have with this product is that it does not include the hardware. It also looks funny, a black bezel with chrome screws. I ended up spraying the screws black to get a better look.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYDurable, not Cheap Quality| Posted by Jimmy A. | 2000 Jeep Wrangler (Dearborn, MI)
Heavy duty thick material, not a cheap plastic design as I have seen from other manufacturers. These should hold up well in the future and down the road. Thanks CARID.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYDefinitely Helps| Posted by Brian L. A. | 1986 Jeep CJ (Glendale, AZ)
I had to purchase new flares because I hit a deer, and the originals were damaged. They cover my Wildcat AT tires really well! They work great too. All in all, they're built well, but they fade a little (second Buffalo winter), and cane get scratched by brush on the trail.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYGood Stuff| Posted by Stewart E. | 1986 Jeep CJ (Cornwall, ON)
Fit was great and covered my 33x12.50's perfectly. I recommend buying the hardware kit. I did not and spent some time at the part store looking for the right bolt, fender washer, and fasteners to replace the rusted factory hardware.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYFantastic so Far!| Posted by Troy M. | 1998 Jeep Wrangler (Charlotte, NC)
These flares look great and cover my 35" x 12.5" tires just perfectly. I did have to trim the small lower front flares. I just used some metal shears and trimmed to fit. If you don't do that, the small flares will push on the middle of the fender flare, because the small flare is factory size (not 7") and is too long to fit right. For a pretty simple modification, I decided it wasn't worth knocking the review down to 4 stars.Was this review helpful for you? YesNo
- More Accessories
- Product Reviews
Reviews (10)View more 10 All Rugged Ridge Tail Lights reviews >>