SST™ 9000 Rear Shocks for 1.0"-2.0" Lifted Vehicles (99-3052R) by ReadyLIFT®. 2 per Pack. Install Time: 0.25-0.5 hour. Each shock specifically designed to work with stock, lifted or leveled trucks. Premium satin finish billet aluminum bodies with anodized anti-corrosion clear coat for maximum protection. 5/8" hard chrome plated shaft. Twin tube design. Gas/Oil separation eliminates cavitation. Nitrogen-charged internal chamber. Rebuildable and Revalvable. Developed for use on trucks with larger oversized tires and wheels. Includes premium Lucas Synthetic oil to insure maximum performance. Give your front suspension a fighting chance of controlling your wheel movement. Stock shocks wear out. And if you’ve got some lift in your suspension, the stock shocks are too short. ReadyLIFT’s Smart Shock Technology is specifically engineered and tested to be correct for your vehicle application.
- 100% Premium Satin Finish Billet Aluminum
- Clear Anodized Corrosion Resistant Coated Bodies
- CNC Precision Machined Body and End Mounts
- Gas / Oil Separated - Eliminates Cavitation. 5/8" Hard Chrome Plated Shaft
- Rebuildable and Revalvable
- Two-Stage Sealing System - Dirt Out, Oil In
- Nitrogen Charged Internal Chamber
- Designed For Use On Leveled and Mild Lifted Vehicles
- Developed For Use With Larger Oversized Wheels and Tires
- Premium Lucas Synthetic Oil To Insure Maximum Performance
We’ll guess that you might need a little more control over your truck’s handling than original-equipment shocks provide. Not to mention some extra length to handle the lift you’ve added. ReadyLIFT® SST®9000 Extended Length shocks will solve your problems. These rebuildable, and revalvable shocks are manufactured with the center-to-center length tailored for your lift, and with valving characteristics developed to match your vehicle. The stout 5/8" chromed shaft carries a rebuildable valve body, and you can even revalve the damping characteristics to suit your vehicle. All of that is wrapped in a 6061 aluminum alloy body that’s pressurized with nitrogen gas to keep internal frothing to a minimum.
Henderson NV is smack in the middle of a lot of off-roading activity. That’s where ReadyLIFT is based, in order to be close to their customers and their needs. About 12 years ago, ReadyLIFT founder and CEO Scott Poncher realized that there was a market for people who wanted to lift their trucks only a few inches, not the six inches or more that most lift kits were set up to do. A few inches were enough to make the truck’s stance level (instead of drooped down in front, as seems to be common today), or to accommodate slightly larger wheels and tires. There was no option for these customers that didn’t raise the truck more than necessary, was easy to install and reasonably priced. And so ReadyLIFT was born to bring a line of reasonably-priced, but still highly-engineered and well-made moderate-rise lift kits to market.